if there's something here you'd like, send me a pm or email. shipping is $3 unless otherwise stated. for multiple items, i can usually just toss them in the bag and ship them for an extra buck, or even at the same cost.
tiagra handle - fair condition, $20 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_20_11775742.jpeg)
tiagra handle - scratches on the grip, $15 plus shipping
(http://alantani.com/gallery/11/1_22_01_15_9_43_18_11774341.jpeg)
large grip - same size as the tiagra grips, drill out so the spindle useless, $5 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_21_117761025.jpeg)
small grip - again, drilled out, so only the grip is good. $5 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_23_117771842.jpeg)
GIVEN AWAY - tld 20/30 two speed handle - no charge. i usually throw these away. shipping is $3, but likely free if combined with anything else.
(http://alantani.com/gallery/11/1_22_01_15_9_43_24_11778229.jpeg)
GIVEN AWAY - tld 20/25 single speed handles - no charge. i usually throw these away, too! shipping is $3, but likely free if combined with anything else.
(http://alantani.com/gallery/11/1_22_01_15_9_43_26_117791433.jpeg)
tld 15 handle - original design, poor condition but no obvious corrosion, $3 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_27_117801070.jpeg)
tld 15 arm, new design, same size grip as the tld 20/25 single speed, $12 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_29_1178176.jpeg)
charter special arm - good condition, this has the smaller grip, $12 plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_30_117822444.jpeg)
SOLD! torium 20 arm - shown with a 3/0 grip, $8 for the arm alone, $35 for the complete handle as shown, plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_32_117832396.jpeg)
baitcaster arms - maybe aftermarket, they will fit an 8x5mm shimano drive shaft, aluminum arm, $5 each plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_33_117841611.jpeg)
stainless steel baitcaster arms - these are slightly longer than the arms above, 85mm from center to center of the handle grips. perfect for kayakers that need corrosion resistance. $10 each plus shipping.
(http://alantani.com/gallery/11/1_22_01_15_9_43_35_11785297.jpeg)
that's it for now. ping me if any of this looks interesting. thanks! alan
Hello Alan, would the Tiagra handles fit on a TLD25?
no, but it would fit a tld 20 or 30 two speed.
Ok. Alan Thanks!
Alan, if you come across a Trinidad TN 20 handle I could really use one. Thanks, George
Are the stainless steel baitcaster arms new or used?
New!
Alan do you have anymore of those Shimano knobs that you just throw away?
Alan, do you have a power handle for a Calcutta 200B? Love the reel but not the paddle handle.
Are the stainless steel Shimano baitcaster arms still available? I sent a PM but had issues, not sure it worked.
yes, i should still have a bunch. when i responded to you pm. i didn't know that this was the one that you were interested in.
Alan do you have any grips for A gold Trinidad.. I just need the cover.
Thanks Jan
i don't. the ones i do come across are usually messed up, which is why i am replacing them. not sure how much they even cost, but shimano usa ought to have them.
Hello Alan, I would really like to replace 7 of the newer style Shimano TLD 50 lrsa handles with the older smaller hard plastic ones. Seems that my Charter customer's thighs keep getting bigger and the larger Torque handles are hard to fit for alot of folks. Do you have any that I can swap, buy, or know where to get? Thank you Sir, Frank
i don't. too bad, also. i've thrown so many of those away....... :-\
Please keep me in mind sir. I would be willing to swap someone the new style for the old. Any idea where I could possibly get some? Is there maybeva smaller profile handle out there that would fit the same purpose, maybe like a larger tld 30 handle? Thanks, Frank
the tld 30 handle will fit. it's way to small, though. those are the ones i always throw away.
Quote from: alantani on February 06, 2018, 11:21:44 PM
the tld 30 handle will fit. it's way to small, though. those are the ones i always throw away.
Will the older Tiagra 2 speed handles work. The ones with the hard plastic T style knob.
yes, they will. i usually throw those away, too...... :-\
I have two of the newer style (rubber football) handles from TLD 30A's that I would trade with $ if needed but like Alan said they would be a bit small for a 50. Your decision.
Scott
Hello all, I have been away for awhile. I am still interested in some of the old plastic "t" style handles for several tld 50 lrsa reels. The larger new style really are too big for alot of our customers to use in the fighting chair without chafing their thighs. Thanks, Frank
Hi Allen,
I got a 3/0 handle, and an arm you had for a Shimano TR-100G. That has turned out to be a very sweet set up for Kayak fishing. Get looks when I go on a charter boat. Some of said the arm/handle combo costs more than the reel, and they may be right, but it is a good set up when your hands are wet ,and pulling something up from the depths of the Farallon's Islands. Do you have any more of those arms, and I could use two three handles. Thanks!
Hi Alan,
I need a handle and lever for a TLD30 2 speed. Can you help? I appreciate all your excellent tutorials keeping my toys toyful!
-randyb
randy, i send you an email. thanks!!!!! alan
looking for a used handle ( knob & handle arm setup ) for a Trinidad TN40. Do you have anything ?
Wondering if I would have to cut the knob off like the Fathom 2 speed handles to get a new knob on handle.
My knob came off in my hand while reeling. not sure if parts went overboard. Schematics show on the handle knob assembly and not all the small bearing etc that are within the shaft.
Friend said Tiburon may have handle( the 500 ).
Any help is appreciated. Happy new Year and hope to visit you & your shop someday.
if the gold arm and stainless steel stud are all still intact, i should have the grip and all of the necessary parts to complete the installation. if you are local, swing by the garage for a beer. if not, ship the arm to me and i'll see if i can get a grip that will work. if the stud broke off because of corrosion, then then arm is likely useless and you will need a new complete handle arm assembly.
i looked and couldn't find any for sale.