Reel Repair by Alan Tani

For Sale => Reels, Parts and Tools from Alan Tani => Topic started by: alantani on February 13, 2015, 05:30:58 AM

Title: daiwa 900h handle arm (drag sets are no longer available)
Post by: alantani on February 13, 2015, 05:30:58 AM
bryan made me a stainless steel handle arm for the daiwa 900h.  it's an exact copy.  the arm is $10, the 5/0 grip is $35, then add probably $5 shipping. 

(http://alantani.com/gallery/11/1_12_02_15_10_11_36_11859961.jpeg)

DRAG SETS ARE NO LONGER AVAILABLE

the 5+1 stack drag kit for the 900h is still the same.  there are 6 carbon fiber washers that are pre-greased, plus four metal washers.  you will need to re-use one of the original keyed metal washers from the reel. the price just went up and is now $30 for the set. 

(http://alantani.com/gallery/11/1_12_02_15_10_11_38_118611592.jpeg)

you're looking at a total $80 with domestic shipping included. 

(http://alantani.com/gallery/11/1_12_02_15_10_11_40_118621470.jpeg)
Title: Re: daiwa 900h handle arm and drag set
Post by: Three se7ens on June 23, 2015, 10:57:52 PM
This will also fit the 600h, it uses the same gear sleeve.
Title: Re: daiwa 900h handle arm and drag set
Post by: crackerman on June 24, 2015, 04:28:00 AM
What happened to the 7+1? Do you still offer it?
Title: Re: daiwa 900h handle arm and drag set
Post by: BrokeLoser on December 01, 2015, 02:45:52 AM
Hi Alan...how do I go about ordering the drag upgrade kit for my 900H? Can I paypal you the money?

Thanks
Wayne
Title: Re: daiwa 900h handle arm and drag set
Post by: BrokeLoser on December 11, 2015, 10:41:37 PM
I received the drag set...thanks Alan...can someone tell me where the smaller carbontex washer sits...bottom or top of stack?
Title: Re: daiwa 900h handle arm and drag set
Post by: handi2 on December 11, 2015, 11:23:16 PM
It will fit in the depression on the bottom of the main gear. Between the gear sleeve and main gear.
Title: Re: daiwa 900h handle arm and drag set
Post by: wsenti on December 27, 2015, 03:24:53 PM
Is this handle still for sale? I have been looking for a larger one than what I currently have (stock). We just serviced and cleaned our 900H.

Let me know if this is still for sale and how we would proceed with a purchase.

Thanks,
Wade
Title: Re: daiwa 900h handle arm and drag set
Post by: Rancanfish on December 27, 2015, 03:54:05 PM
Good morning, Wade.

Just email or send a private message to Alan.  He'll answer you.
Title: Re: daiwa 900h handle arm and drag set
Post by: mikeg24thst on January 23, 2016, 01:08:16 AM
Do you have any drag sets
Title: Re: daiwa 900h handle arm and drag set
Post by: alantani on January 23, 2016, 01:36:56 AM
i think i have one more left.  the last guy wanted five sets and i don't have that many, so bryan is making some more metal washers.  in the meantime, i've got to clear out the backlog of parts.  i will get these send out as soon as i can. 
Title: Re: daiwa 900h handle arm and drag set
Post by: mikeg24thst on January 23, 2016, 05:10:01 AM
Ok i need one set you should have my address
Title: Re: daiwa 900h handle arm and drag set
Post by: bigghinz on May 13, 2016, 06:26:30 PM
Are there any Drag Kits still available for the 900H? And can Paypal be used for payment?
Title: Re: daiwa 900h handle arm and drag set
Post by: alantani on May 13, 2016, 08:46:05 PM
got a bunch, still.  send me a pm with your address and i will get a set out to you.  thanks!  alan
Title: Re: daiwa 900h handle arm and drag set
Post by: wsenti on February 07, 2017, 03:54:17 PM
Is this a drag upgrade kit? If so, do you have any more? Looking around to upgrade drag system of Daiwa 900h.

Title: Re: daiwa 900h handle arm and drag set
Post by: alantani on February 07, 2017, 06:14:25 PM
yes, i still have them!  send me a pm with your address and i will get a set out to you! 
Title: Re: daiwa 900h handle arm and drag set
Post by: Mjg378 on May 16, 2018, 08:46:15 PM
Thanks Alan for sending out the 900h handle arm. That was quick!   Perfect Fit on my 600h.  
Mike
Title: Re: daiwa 900h handle arm and drag set
Post by: olJack on May 19, 2018, 03:06:52 PM
I would the handle and arm for my 600h, I have already done Brian's washers, also your bearing packer set. Thank you, olJack
Title: Re: daiwa 900h handle arm and drag set
Post by: alantani on May 20, 2018, 03:34:00 AM
in the mail, thanks!!!!
Title: Re: daiwa 900h handle arm and drag set
Post by: williewiskers on January 27, 2020, 04:18:19 PM
Alan,

How do I order a drag stack for the 900H?


Ty,
The Wiskers
Title: Re: daiwa 900h handle arm and drag set
Post by: RowdyW on January 27, 2020, 04:42:46 PM
Ty, just pm Alan & order one. He will reply with cost, how to pay him, & his address. And leave your mailing address.       Rudy
Title: Re: daiwa 900h handle arm and drag set
Post by: williewiskers on January 28, 2020, 01:49:38 PM
Thanks, put my PM into him yesterday.
Title: Re: daiwa 900h handle arm and drag set
Post by: williewiskers on January 28, 2020, 10:36:34 PM
This is my first time buying from this site, what is a normal amount of time to wait for a response from a PM to Alan?
Title: Re: daiwa 900h handle arm and drag set
Post by: RowdyW on January 29, 2020, 12:19:30 AM
Alan was on a fishing trip to Mexico and should be getting back today or tomorrow. Give him a couple of days to catch up. He'll get back to you as soon as he can. There's a post on his trip to Porta Vareda with the Tuna he caught.
Title: Re: daiwa 900h handle arm and drag set
Post by: alantani on January 30, 2020, 12:20:54 AM
still slugging through stuff.  i'll get to you really soon.  thanks for your patience. 
Title: Re: daiwa 900h handle arm and drag set
Post by: williewiskers on February 18, 2020, 07:17:38 PM
Got it awhile ago, reels all together. Everything worked perfectly with the Cortez sleeve.

Thank you!