Reel Repair by Alan Tani

For Sale => PRO Challenger Fishing Products by Alan Chui => Topic started by: Black Pearl on March 22, 2017, 04:58:39 PM

Title: 113H offset handle is ready
Post by: Black Pearl on March 22, 2017, 04:58:39 PM
This offset handle will fit the following Penn reels and PRO Gear 454 and 545.

PENN Reels
==============================
113HSP
20, 20T
25GLS
30, 30T, 30TW
30S, 30SW
30VW (Older and Newer)
40GLS, 45GLS
50, 50T, 50TW, 50W
50S, 50SW
50VW
113H, 113HL, 113HLW, 113HSP
113MTL
220GTO, 230GTO (Also needs one 110-60 locking screw)
225LD, 245LD, 246LD
320GT, 321GT
320LD
320GT2, 321GT2
320GT2LC
330GT, 330GT2
340GT, 345GT
340GT2, 345GT2
349, 349H, 349HC
970, 980, 990
TRQ300LD



I will upload a finish product when it comes in.

The price is $9.99 + $2.61 shipping for one handle, and shipping will be $1.00 for each additional handle (only for US member). For international shipping, please send me an email at sales@prochallenger.com for more information.

There will be 10% off on total price if purchased handle arm with any knobs.



(http://i1280.photobucket.com/albums/a494/prochallenger/ff110d78-fb3b-40b2-a8c0-e1e4b29487df_zps2hktxzd9.jpg)

(http://i1280.photobucket.com/albums/a494/prochallenger/f9e88204-25e0-43cb-9802-c3dcc9cedfa4_zps0if3kfso.jpg)
Title: Re: 113H offset handle is coming soon!!!
Post by: STRIPER LOU on March 22, 2017, 05:08:01 PM
Looks good Alan. Possibly you may consider a full radius on the end. Looks much more trim with some of the bulk removed.

Have a great day,  ..  Lou
Title: Re: 113H offset handle is coming soon!!!
Post by: mo65 on March 22, 2017, 05:11:57 PM
   Wow! This should be a hot item...I'd like to see one for 112/Jigmaster also! 8)
Title: Re: 113H offset handle is coming soon!!!
Post by: broadway on March 22, 2017, 08:01:40 PM
Looks great Alan and nice price too!
I agree with Lou about the rear end radius.
Thanks for doing these,
Dom
Title: Re: 113H offset handle is coming soon!!!
Post by: Black Pearl on March 22, 2017, 08:50:40 PM
Quote from: broadway on March 22, 2017, 08:01:40 PM
Looks great Alan and nice price too!
I agree with Lou about the rear end radius.
Thanks for doing these,
Dom
Quote from: STRIPER LOU on March 22, 2017, 05:08:01 PM
Looks good Alan. Possibly you may consider a full radius on the end. Looks much more trim with some of the bulk removed.

Have a great day,  ..  Lou

Hi guys,

I did have that radius thing in the drawing at first, but Sal requested to have this design. I think it is much stronger with more material.
Title: Re: 113H offset handle is coming soon!!!
Post by: STRIPER LOU on March 22, 2017, 11:19:51 PM
Alan, a full radius blend will not make it weaker. You would probably have to add at least 1/8" of material or more to the make the full blend.  Certainly not knocking Sal's idea or anyone else's for that matter.

Making the full blend radius will streamline it and get rid of some of the bulk. Pic shows full radius on the end for a cleaner look.

Just and opinion. Either way, thanks for your time and working on this.

all the best,  ..  Lou
Title: Re: 113H offset handle is coming soon!!!
Post by: Alto Mare on March 23, 2017, 12:34:00 AM
No Lou, my request wasn't  based only on strength, I thought it looks much better than the one with the full radius.
I  have both as well, but prefer the one on top, I guess personal preference.

If Alan wants to change the drawings, that would be up to him, I'm still liking it as is though.


Sal

Title: Re: 113H offset handle is coming soon!!!
Post by: STRIPER LOU on March 23, 2017, 12:56:43 AM
Not a big deal Mr. C.
As you said, just a matter preference. I do make them here on occasion but with my equipment its very time consuming and not very cost effective. I can tell you which ones seem to be preferred here though.

Have a great evening,  ..  Lou
Title: Re: 113H offset handle is coming soon!!!
Post by: Bryan Young on March 23, 2017, 01:13:16 AM
Just an observation to cut costs.

You probably will not need 2 handle but set screws if the distance is correct. You only need the center one.
Title: Re: 113H offset handle is coming soon!!!
Post by: Alto Mare on March 23, 2017, 01:23:43 AM
Quote from: STRIPER LOU on March 23, 2017, 12:56:43 AM
Not a big deal Mr. C.

Have a great evening,  ..  Lou
It never was Lou, have a great evening as well.
Title: Re: 113H offset handle is coming soon!!!
Post by: mhc on April 04, 2017, 11:41:15 AM
I missed this post while I was on a short holiday - it looks like a good design, I'm keen to see the final result. I will definitely be interested in a few, not only for my 113H but 349s & a Progear as well.
Thanks Alan!
Mike
Title: Re: 113H offset handle is coming soon!!!
Post by: Yogi_fish808 on April 06, 2017, 12:15:23 PM
I'm in for 1 silver and 1 red when these are ready. Aloha!
Title: Re: 113H offset handle is coming soon!!!
Post by: thorhammer on April 06, 2017, 12:26:02 PM
Hi Alan, will the blue match Tom's Cortez plates? I'm in for a few but have to decide on colors yet.

John
Title: Re: 113H offset handle is coming soon!!!
Post by: Black Pearl on April 06, 2017, 03:08:32 PM
Quote from: thorhammer on April 06, 2017, 12:26:02 PM
Hi Alan, will the blue match Tom's Cortez plates? I'm in for a few but have to decide on colors yet.

John

It will be more likely the same blue as my 501 aluminum spool colors.

http://alantani.com/index.php?topic=14027.msg142679#msg142679 (http://alantani.com/index.php?topic=14027.msg142679#msg142679)
Title: Re: 113H offset handle is coming soon!!!
Post by: Black Pearl on April 06, 2017, 03:09:36 PM
I will also use the same design for Jigmaster's and Newell's handles
Title: Re: 113H offset handle is coming soon!!!
Post by: thorhammer on April 06, 2017, 03:34:54 PM
Noted. I have that spool, so will be needing that jiggy arm when available :)

Title: Re: 113H offset handle is coming soon!!!
Post by: badfish71 on April 17, 2017, 07:56:12 PM
Are these still on track for the end of this month? Available on the website or here?
Title: Re: 113H offset handle is coming soon!!!
Post by: Black Pearl on April 17, 2017, 07:59:39 PM
Quote from: badfish71 on April 17, 2017, 07:56:12 PM
Are these still on track for the end of this month? Available on the website or here?

It is on track to be here by the end of this month. They will be available throug the website.

Thanks,
Alan
Title: Re: 113H offset handle is coming soon!!!
Post by: Black Pearl on May 02, 2017, 10:17:20 PM
These handles should be here by end of next week.
Title: Re: 113H offset handle is coming soon!!!
Post by: Black Pearl on May 11, 2017, 11:48:36 AM
Finally, these handles are done, and they are on their way to Florida. They should be here next Tuesday or Wednesday (5/16 or 5/17).

Please note that I only have 25 pcs for each colors.
Title: Re: 113H offset handle is coming soon!!!
Post by: RowdyW on May 11, 2017, 03:43:10 PM
Alan, I'm still in for 2 red & 2 silver.        Rudy
Title: Re: 113H offset handle is coming soon!!!
Post by: steelfish on May 12, 2017, 01:12:11 AM
interested in two handles Alan

red and silver
Title: Re: 113H offset handle is coming soon!!!
Post by: Black Pearl on May 12, 2017, 01:53:19 AM
10-4. I will send out a PayPal invoice when I get them.
Title: Re: 113H offset handle will ready for shipment on 5/17.
Post by: Black Pearl on May 17, 2017, 12:00:30 AM
These handles will be here tomorrow. I will upload some pictures tomorrow
Title: Re: 113H offset handle will ready for shipment on 5/17.
Post by: Swami805 on May 17, 2017, 12:55:14 AM
Will they be on your website or should I order them here?thanks
Title: Re: 113H offset handle will ready for shipment on 5/17.
Post by: Black Pearl on May 17, 2017, 04:53:55 PM
For purchase this item, please send email or PM to me, and a Paypal invoice will be sent. Please let me know the state where your order will be sent to. If no state info, I will issue your invoice with FL 7% sale tax (it will be refunded sale tax if your order is out of FL).


There will be 10% off on total price if purchased handle arm with any knobs.



(http://i1280.photobucket.com/albums/a494/prochallenger/ff110d78-fb3b-40b2-a8c0-e1e4b29487df_zps2hktxzd9.jpg)

(http://i1280.photobucket.com/albums/a494/prochallenger/f9e88204-25e0-43cb-9802-c3dcc9cedfa4_zps0if3kfso.jpg)
Title: Re: 113H offset handle will ready for shipment on 5/17.
Post by: badfish71 on May 17, 2017, 07:36:12 PM
email sent for 1 silver and 1 blue.
Thanks
Title: Re: 113H offset handle is ready
Post by: mitch27 on May 18, 2017, 11:03:58 PM
 PM sent: 1 red handle & 1 red ALU 49  knob. Thanks for making these for us .  mitch27
Title: Re: 113H offset handle is ready
Post by: Black Pearl on May 19, 2017, 12:07:13 AM
Quote from: mitch27 on May 18, 2017, 11:03:58 PM
PM sent: 1 red handle & 1 red ALU 49  knob. Thanks for making these for us .  mitch27

You got invoice....... ;D

Thanks,
--Alan
Title: Re: 113H offset handle is ready
Post by: badfish71 on May 22, 2017, 11:12:43 PM
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.
Title: Re: 113H offset handle is ready
Post by: Black Pearl on May 22, 2017, 11:31:54 PM
Quote from: badfish71 on May 22, 2017, 11:12:43 PM
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.

Can you post a picture?
Title: Re: 113H offset handle is ready
Post by: badfish71 on May 23, 2017, 04:27:00 PM
Quote from: Black Pearl on May 22, 2017, 11:31:54 PM
Quote from: badfish71 on May 22, 2017, 11:12:43 PM
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.

Can you post a picture?


(http://i63.tinypic.com/2u3z0g7.jpg)
Title: Re: 113H offset handle is ready
Post by: Black Pearl on May 23, 2017, 04:40:18 PM
Quote from: badfish71 on May 23, 2017, 04:27:00 PM
Quote from: Black Pearl on May 22, 2017, 11:31:54 PM
Quote from: badfish71 on May 22, 2017, 11:12:43 PM
Received the handles today. Very nice fit and finish. I ordered the blue to match my progear 545. In case someone is wondering they are not the same blue. The progear handle is much much darker.

Can you post a picture?


(http://i63.tinypic.com/2u3z0g7.jpg)

It is hard to match color. I will make some darker one next time.
Title: Re: 113H offset handle is ready
Post by: Black Pearl on May 26, 2017, 12:12:13 AM
This picture is from Sal.
(http://i1280.photobucket.com/albums/a494/prochallenger/1439D53F-0645-4BA7-A767-C30032E2BE03_zpsowdlozcp.jpg)

(http://i1280.photobucket.com/albums/a494/prochallenger/513CDE02-4206-49C9-8307-7CB32D80B7C5_zpsobpbaesz.jpg)
Title: Re: 113H offset handle is ready
Post by: steelfish on May 26, 2017, 12:13:45 AM
got mines.. they look pretty good and are extremely light, thanks compadre

Title: Re: 113H offset handle is ready
Post by: Alto Mare on May 26, 2017, 02:16:57 AM
And a black one, along with a black knob:
(http://i1101.photobucket.com/albums/g431/pescatore1/Photo%20May%2025%209%2058%2049%20PM.jpg) (http://s1101.photobucket.com/user/pescatore1/media/Photo%20May%2025%209%2058%2049%20PM.jpg.html)
(http://i1101.photobucket.com/albums/g431/pescatore1/Photo%20May%2025%209%2057%2025%20PM.jpg) (http://s1101.photobucket.com/user/pescatore1/media/Photo%20May%2025%209%2057%2025%20PM.jpg.html)
Good job on these Alan, they're very nice!

Sal
Title: Re: 113H offset handle is ready
Post by: obawon on May 29, 2017, 08:37:42 AM
Great looking handles at a very reasonable price!  Am I correct that these should fit the penn 320gt since the fit the 113?  If so I will probably order a couple.
Tight lines!
Title: Re: 113H offset handle is ready
Post by: mo65 on May 29, 2017, 11:00:11 AM
   Sal...it looks great on that Mag Power!  8)
Title: Re: 113H offset handle is ready
Post by: Black Pearl on May 29, 2017, 11:53:53 AM
Quote from: obawon on May 29, 2017, 08:37:42 AM
Great looking handles at a very reasonable price!  Am I correct that these should fit the penn 320gt since the fit the 113?  If so I will probably order a couple.
Tight lines!


Yes, it will fit 320gt. I will list more penn reels which this handle fits.


PENN Reels
============================
113HSP
20, 20T
25GLS
30, 30T, 30TW
30S, 30SW
30VW (Older and Newer)
40GLS, 45GLS
50, 50T, 50TW, 50W
50S, 50SW
50VW
113H, 113HL, 113HLW, 113HSP
113MTL
220GTO, 230GTO (Also needs one 110-60 locking screw)
225LD, 245LD, 246LD
320GT, 321GT
320LD
320GT2, 321GT2
320GT2LC
330GT, 330GT2
340GT, 345GT
340GT2, 345GT2
349, 349H, 349HC
970, 980, 990
TRQ300LD
Title: Re: 113H offset handle is ready
Post by: fIsHsTiiCkS on July 24, 2018, 11:48:13 AM
Quote from: Black Pearl on May 26, 2017, 12:12:13 AM
This picture is from Sal.
(http://i1280.photobucket.com/albums/a494/prochallenger/1439D53F-0645-4BA7-A767-C30032E2BE03_zpsowdlozcp.jpg)

(http://i1280.photobucket.com/albums/a494/prochallenger/513CDE02-4206-49C9-8307-7CB32D80B7C5_zpsobpbaesz.jpg)

Just a beautiful reel..
Title: Re: 113H offset handle is ready
Post by: Maxed Out on July 24, 2018, 02:54:26 PM

Wow Sal, that is one absolutely stunning 113hn you put together. I'm a huge fan of all silver and you really nailed it on this build. Congrats !!

  Ted
Title: Re: 113H offset handle is ready
Post by: broadway on July 24, 2018, 07:40:38 PM
Heck of a reel you created there, Sal. 
I hope you built that for Anthony 8)
Be good bud,
Dom
Title: Re: 113H offset handle is ready
Post by: Darin Crofton on September 01, 2018, 05:09:41 PM
Hello,
Do you still make these? If so, do they fit the ProGear 541 & 441?
Thanks,
Darin
Title: Re: 113H offset handle is ready
Post by: Black Pearl on September 01, 2018, 05:24:40 PM
Quote from: Darin Crofton on September 01, 2018, 05:09:41 PM
Hello,
Do you still make these? If so, do they fit the ProGear 541 & 441?
Thanks,
Darin

I know it will fit the 545. For 441, I think that the JM handle might fit that. I am not sure about that.
Title: Re: 113H offset handle is ready
Post by: Darin Crofton on September 01, 2018, 05:43:21 PM
Quote from: Black Pearl on September 01, 2018, 05:24:40 PM
Quote from: Darin Crofton on September 01, 2018, 05:09:41 PM
Hello,
Do you still make these? If so, do they fit the ProGear 541 & 441?
Thanks,
Darin

I know it will fit the 545. For 441, I think that the JM handle might fit that. I am not sure about that.
Was just on your website, will be getting 4 of your 113H gear packages, 4 of Adam's Insert Drag Kits, 4 offset handles from whomever? and want 4 SS DD Bridge assembly's from you if you're getting more (your site says out of stock)??? Thanks!