Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Fin-Nor Tutorials and Questions => Topic started by: BNE31 on May 30, 2017, 09:40:56 PM

Title: Fin-nor Lethal LTL20 - Drag Plate Assembly
Post by: BNE31 on May 30, 2017, 09:40:56 PM
Took apart my new LTL 20 to fully grease everything.  Good thing since the gears had no grease on them.  Not sure if this is normal from the factory or and oversight.  When removing the drag plate assembly there is a plastic arm on the underside of the plate that I did not notice until I removed it.  Now I'm not sure the position the arm needs to be in for reassembly.  I can't tell what function the plastic arm has so I'm not sure which of 2 possible positions is the correct one.  I believe it may have something to do with the anti-reverse pawl, but I'm not sure.  I've reassembled with the plastic arm in both positions and everything seems to function properly in both cases.

Anybody know what the plastic arm assembly is for and more importantly what the correct position is?  Thanks for any help.
Title: Re: Fin-nor Lethal LTL20 - Drag Plate Assembly
Post by: Hanker on June 17, 2017, 02:16:29 PM
 :) as i know, the plastic arm that you removed---it's function was only to keep the Anti-reverse pawl silence. i will show you the correct position later.