Reel Repair by Alan Tani

For Sale => Custom Parts by Tom Hryniuk => Topic started by: Cortez_Conversions on June 06, 2017, 01:16:38 PM

Title: Penn 9/0 Side Plates
Post by: Cortez_Conversions on June 06, 2017, 01:16:38 PM
I posted some pics on Facebook over the weekend showing the progress on the Penn 9/0
side plates.

Check it out on the Cortez Conversions page.

I'm tired of photo bucket, so as soon as i find a hosting site, I'll post some pics.

Tom
Title: Re: Penn 9/0 Side Plates
Post by: Army_of_One on June 06, 2017, 01:20:24 PM
If you don't mind:
(https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-9/18838874_1397730683655204_7520362059473492817_n.jpg?oh=f760ebf2f9b4599b87849fdaa023ce81&oe=59AA5429)
(https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-9/18951247_1397730676988538_8375997455686488846_n.jpg?oh=36fbe8b0d8ac018d9ea2a20842ec8312&oe=599D01E5)
(https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-9/18881936_1397730686988537_4485853058248104994_n.jpg?oh=c8e16bcbc8a7c1dfb9bd736db4cbd0fc&oe=59ACA2CA)
Title: Re: Penn 9/0 Side Plates
Post by: steelhead_killer on June 06, 2017, 01:25:15 PM
Sal was right, again!  NICE

Im done with photobucket, they have made it impossible to use effectively.  Let us know what you land on to use...

Andy
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on June 06, 2017, 01:34:15 PM
Oh my. Oh my. Oh my. Tom, do you have a price point yet?
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on June 06, 2017, 02:29:41 PM
I was going to exert self-control. Then I looked at the picture. Where is that list?


Sid
Title: Re: Penn 9/0 Side Plates
Post by: Army_of_One on June 06, 2017, 02:57:39 PM
 ;)
(https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-0/q86/s480x480/18881996_1397729480321991_5388481450358983369_n.jpg?oh=c3012a1ead8829b8cc40ca0fb1e02aab&oe=59DA34B1)
There's even a notch for a second dog spring!
(https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-9/18767936_1397729476988658_4880798022104277143_n.jpg?oh=9c18afcaf049a9317e7c5c251a18ce57&oe=59A7C870)
Title: Re: Penn 9/0 Side Plates
Post by: Bryan Young on June 06, 2017, 03:43:53 PM
Killer Tom!
Title: Re: Penn 9/0 Side Plates
Post by: handi2 on June 06, 2017, 03:57:35 PM
Thanks Robin for posting. More money..!
Title: Re: Penn 9/0 Side Plates
Post by: steelfish on June 06, 2017, 04:13:34 PM
Quote from: Army_of_One on June 06, 2017, 02:57:39 PM
;)

(https://scontent-dft4-1.xx.fbcdn.net/v/t1.0-9/18767936_1397729476988658_4880798022104277143_n.jpg?oh=9c18afcaf049a9317e7c5c251a18ce57&oe=59A7C870)

this looks made for medical purposes  !!  awesome job Tom as always
Title: Re: Penn 9/0 Side Plates
Post by: mo65 on June 06, 2017, 04:55:04 PM
Quote from: Cortez_Conversions on June 06, 2017, 01:16:38 PM
I'm tired of photo bucket, so as soon as i find a hosting site, I'll post some pics.

      I hear ya Tom...photobucket drives me mad...slower than molasses! Have you tried just using the "additional options" feature here. It uploads pics direct from your files...no annoying hosts to deal with. It does make doing a tutorial kinda tough...as it allows only four pics per post. BTW...the plates are going to be a hit!  8)
Title: Re: Penn 9/0 Side Plates
Post by: Shark Hunter on June 06, 2017, 04:59:29 PM
Quote from: sdlehr on June 06, 2017, 02:29:41 PM
I was going to exert self-control. Then I looked at the picture. Where is that list?


Sid
It starts right behind me Sid. ;)
Guys, I am using Flickr, and love it.
It is free and without all the BS.
Starts with 1000 GB of free storage, not sure what is after that.
(https://c1.staticflickr.com/5/4159/34719284866_7727331586_c.jpg)
Title: Re: Penn 9/0 Side Plates
Post by: steelfish on June 06, 2017, 05:18:19 PM
if you have gmail account you have a lot of services, I was also a long time user of photobucket but is going to the trash, so I started to use google images or pictures dont recall correctly.
it dont give your a direct link to post on forums but you have your pictures on one place and just --- right click and copy the link of the picture and then use the forum picture button to paste it.



(https://lh3.googleusercontent.com/kn0lIdgZuSu-uh5GQBeJQre-yWdyolorSfJ4-c7QmjK_TJHv_dVROy3h4qDJA07thgRqBVyUxYqTloqzB8ejT_M1gBxYPa9aeGAGf_6JCfBgpW2_zJy2EunNbu4N9VfaTxIVQxMw5gzFWN-45KpbKwBlPIbvMy3vf6RucVruoRCACRO39l2QZ-KRyWSJ8u7NTyqum50PNFkcW3_0OKEbc-In_x7y4am9NkJrrkgi5Qu1zE1NsUDfrVc0yqt16lRaCOaMVSmYxIt3oZfXFC_9Cqjn561EwO9xOrBuF3U7blysd-K68BSODN4cLYDAfNSRED802AauwORkdcyFZxoFm1JmYWMKBYdxAK6rqyfUkKEHHwjDCtqUQlEoS10W3Q_G0II4wJ9Hl68ddaS55GMVQkpbnSG2r49pHeWPUjMp4wov1GPWZJrEAtEqgShLyQFPyhL14RHivoLlVmNej6QNfjR_fIwxy3JgrV9mCTFRkT_B9S_Bwg9qfnsmwFl8iSecKzuQKKeguMm8nND6uJu3umGSM761xoz36Se91xyN-Qd2R07PzPu6o0w2Kchvalvnr1DYbNKMFCi0H_33egl-EQPLHOXkaOLndTH8AfIqd6Z6xg64CEZH=w843-h632-no)




by the way, Tom you just made a lightweight International reel star drag in silver  ;D
Title: Re: Penn 9/0 Side Plates
Post by: Army_of_One on June 06, 2017, 07:40:41 PM
All I did was right click your facebook picture "copy image address, or save image location" then clicked the insert image option here(to the left of the planet) and pasted between the img blocks.  It works in IM too.
Title: Re: Penn 9/0 Side Plates
Post by: broadway on June 07, 2017, 02:39:03 AM
Tom will these fit accurate frames?  Any ideas for colors so far? I'll definitely need a silver but maybe a black to go with your 9/0 frames you did a few years ago. ;)
Thanks, they look great! 
Dom
Title: Re: Penn 9/0 Side Plates
Post by: Gfish on June 07, 2017, 03:11:22 AM
Makin me wish I hadda need for a 9/0. Any future plans for 6/0 plates?
Gfish
Title: Re: Penn 9/0 Side Plates
Post by: Tightlines667 on June 07, 2017, 04:25:38 AM
Good stuff here.  Next we need a drop in double dog bridge to make the transformation complete.

John
Title: Re: Penn 9/0 Side Plates
Post by: TongassFisher on June 08, 2017, 10:19:32 PM
Rediculous!

I want!
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on June 09, 2017, 03:37:59 PM
Are the plates machined for dual anti reverse dogs.


Mike
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on June 09, 2017, 04:42:25 PM
Quote from: mikeysm on June 09, 2017, 03:37:59 PM
Are the plates machined for dual anti reverse dogs.


Mike

Hello Mike,
These prototype plates currently have the standard single dog cut out, right hand and left hand like stock plates.
I did have Daron cut me samples of his double dog mods on all the big boy plates ;)
Tom
Title: Re: Penn 9/0 Side Plates
Post by: TongassFisher on July 06, 2017, 06:17:29 PM
I'm quite excited about these plates making it to production!

Tom do you see offering a full 9/0 build kit with frame and plates or is it going to be offered in pieces?

I'd love for a Cortez conversion 9/0 to be my next build!

Title: Re: Penn 9/0 Side Plates
Post by: bill19803 on July 06, 2017, 06:59:19 PM
just  got   done telling   Lou  my  collecting  days  are  done  and  the  Tom  goes  and releases  this   not fair   so ill  modify    my collecting statement.  im  done after  i  get  a  9/0  via  tom
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on July 06, 2017, 08:53:10 PM
Bill, I don't think you have enough room left on those shelves  ::) ;D
Title: Re: Penn 9/0 Side Plates
Post by: biggiesmalls on July 06, 2017, 10:41:25 PM
Oh boy, oh by oh boy oh boy.

I'm still saving up to buy a frame from you, don't do this to me (and my wallet)! ;)
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on July 06, 2017, 10:44:12 PM
Shut yer pie hole Drew.  You only got one you gotta do 🤛🏻
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on August 22, 2017, 09:57:22 PM
What is the news on the 9.0 plates. When is it going to be ready.

Mike
Title: Re: Penn 9/0 Side Plates
Post by: Tightlines667 on August 22, 2017, 10:05:00 PM
Quote from: Cortez_Conversions on June 09, 2017, 04:42:25 PM
Quote from: mikeysm on June 09, 2017, 03:37:59 PM
Are the plates machined for dual anti reverse dogs.


Mike

Hello Mike,
These prototype plates currently have the standard single dog cut out, right hand and left hand like stock plates.
I did have Daron cut me samples of his double dog mods on all the big boy plates ;)
Tom

That's good news!

:)
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on March 26, 2018, 08:13:30 PM
Let's talk colors....

Silver and black for sure to match my frames, red? ice blue? I'm not going to make a lot of these, so i kinda want to keep the number of colors down.

What do you all think??
Tom
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on March 26, 2018, 08:39:52 PM
Ice blue for sure. Would love a set in your green also.
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on March 26, 2018, 09:15:38 PM
Any color goes good with the frames you sell. Ice blue will go good with silver or black.
Title: Re: Penn 9/0 Side Plates
Post by: TongassFisher on March 26, 2018, 09:52:08 PM
I'm leaning towards silver!
Title: Re: Penn 9/0 Side Plates
Post by: Swami805 on March 26, 2018, 10:20:23 PM
That dark cobalt blue you used on the 146 kits would be cool but the black frame works with anything for me. I'll go with the herd on this one. Thanks for doing it
Title: Re: Penn 9/0 Side Plates
Post by: Shark Hunter on March 26, 2018, 10:21:16 PM
Ice, Ice Baby. ;)
Cobalt would be nice too.
Either one will work.
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on March 26, 2018, 10:42:34 PM
Tom are you anodizing the frames as well to match the plates?
I would love to get a green set and maybe red.

Sal

Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on March 26, 2018, 11:40:49 PM
Quote from: Alto Mare on March 26, 2018, 10:42:34 PM
Tom are you anodizing the frames as well to match the plates?
I would love to get a green set and maybe red.

Sal



Not this time Sal. These are just plates.
I do want to make a full frame kit for the Cortez Conversions Classic series though....
Tom
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on March 26, 2018, 11:46:09 PM
Oh boy
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on March 27, 2018, 02:36:22 AM
Quote from: Cortez_Conversions on March 26, 2018, 11:40:49 PM
Quote from: Alto Mare on March 26, 2018, 10:42:34 PM
Tom are you anodizing the frames as well to match the plates?
I would love to get a green set and maybe red.

Sal



Not this time Sal. These are just plates.
I do want to make a full frame kit for the Cortez Conversions Classic series though....
Tom
👍...cool, those should come first.
They do have your name on them🙂
Title: Re: Penn 9/0 Side Plates
Post by: Swami805 on April 29, 2018, 03:15:26 AM
How are these coming along? Just checking
Title: Re: Penn 9/0 Side Plates
Post by: David Hall on April 29, 2018, 04:14:32 AM
I knew I saved that 9/0 frame and upgrades for a reason,  black to go with the frame will be nice.
Title: Re: Penn 9/0 Side Plates
Post by: twotone on April 29, 2018, 04:27:15 AM
Will these fit your Dom Tom frame? Maybe I missed this question about fitment ? If so ,black and sliver would good.
Title: Re: Penn 9/0 Side Plates
Post by: Three se7ens on April 30, 2018, 03:29:07 AM
Ice blue for me.  One set for sure, possibly a second.
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on May 01, 2018, 02:02:59 PM
Yes, these plates will fit all Accurate, old style Tib and my Cortez Conversions frames. I'll probably do a few colors, so keep the conversation going, I'm undecided at the moment.
Tom
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on May 01, 2018, 02:52:01 PM
green, blue, silver. I'll take one of each :)
Title: Re: Penn 9/0 Side Plates
Post by: Army_of_One on May 01, 2018, 07:13:31 PM
Quote from: Cortez_Conversions on May 01, 2018, 02:02:59 PM
Yes, these plates will fit all Accurate, old style Tib and my Cortez Conversions frames. I'll probably do a few colors, so keep the conversation going, I'm undecided at the moment.
Tom
Have you made anything yet that hasn't sold out?  ;)  I know purple is never the answer though.  :(  If you have a raw aluminum set ready I, and many others, would jump on them today!
Title: Re: Penn 9/0 Side Plates
Post by: Maxed Out on May 01, 2018, 08:02:10 PM

Red, silver, and ice blue are all great colors you have done in the past. I'm sure they'll sell no matter the color.

Ted
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 11, 2018, 04:22:39 AM
Trying my hand at turning
(https://i.imgur.com/VplygVu.jpg)
I think Walnut looks very good with Blue
(https://i.imgur.com/5nBTh7x.jpg)
This one is about 1/2"taller than the 24-117
(https://i.imgur.com/NPmA3vl.jpg)
(https://i.imgur.com/jb0ROnL.jpg)

Sal
Title: Re: Penn 9/0 Side Plates
Post by: broadway on June 11, 2018, 05:09:22 AM
Tom,  These are exciting for sure!  I think any time you bring... ice blue, silver, and black to the party it seems to satisfy many.  Green and red are welcomed bonus'.
Sal,  I'm digging the homage to the old school Penn handles with the "striping", shape, and counter balance.  Try a Rosewood like their old "door knob", "log", and "coffee grinders."
I will say you spoiled me with that first one in the back because that is seriously the cats PJ's!
Keep up the innovative work, pals,
Dom
Title: Re: Penn 9/0 Side Plates
Post by: Swami805 on June 11, 2018, 05:11:15 AM
That's beautiful Sal, if that's trying your hand can't wait to see what you come up with when you feel like your're good at it. I'd say you have it down pat. Sheridan
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 11, 2018, 01:14:39 PM
Thanks Dom and Sheridan, I'm glad you like it.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: xjchad on June 11, 2018, 04:17:53 PM
Beautiful Sal!  I love the wood handle look you've done with both of those reels!
I have a question, where do you get the post for your knobs?  Do you make those too?
Title: Re: Penn 9/0 Side Plates
Post by: Maxed Out on June 11, 2018, 05:44:55 PM
 Wow Sal, looks great.... Love the blue 9/0

 ....I'd love to see you do the same knob with one of Lou's blanks
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 11, 2018, 08:26:24 PM
Quote from: xjchad on June 11, 2018, 04:17:53 PM
Beautiful Sal!  I love the wood handle look you've done with both of those reels!
I have a question, where do you get the post for your knobs?  Do you make those too?
No Chad, these I had laying around.
I'm trying to get someone to make me some, if that doesn't happen I will make my own.
Quote from: Maxed Out on June 11, 2018, 05:44:55 PM
Wow Sal, looks great.... Love the blue 9/0

 ....I'd love to see you do the same knob with one of Lou's blanks
Thanks Ted!
We must be thinking the same way, eventually that is the plan.
I was going to try acrylic and stabilized wood, the blank is crazy expensive but the look is out of this world...we'll see.
I cut many shapes, to me the original Penn knobs are the best looking out of the bunch.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: Swami805 on June 11, 2018, 08:55:40 PM
We run a couple tons of wood thru a chipper almost daily. I run across small piece of burl and interesting small piece of wood all the time. I have a big chunk of walnut burl I've been hanging onto for years. If you could use some let me know. Sheridan
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 12, 2018, 09:22:20 AM
Quote from: Swami805 on June 11, 2018, 08:55:40 PM
We run a couple tons of wood thru a chipper almost daily. I run across small piece of burl and interesting small piece of wood all the time. I have a big chunk of walnut burl I've been hanging onto for years. If you could use some let me know. Sheridan
I thank you Sheridan, but you being on the opposite side of the coast it would make it expensive to ship. :-\


Sal
Title: Re: Penn 9/0 Side Plates
Post by: mhc on June 12, 2018, 10:37:23 AM
You're on a roll with the timber grips Sal - love the classic design with a bit more grip to fill the hand, are you using the small metal lathe you bought a few years back?
No doubt you have already considered it, but I like Broadway Dom's suggestion of a coffee grinder grip in a close grained timber for one of your bigger spinners.

Mike 
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 13, 2018, 12:30:26 AM
Quote from: mhc on June 12, 2018, 10:37:23 AM
You're on a roll with the timber grips Sal - love the classic design with a bit more grip to fill the hand, are you using the small metal lathe you bought a few years back?
No doubt you have already considered it, but I like Broadway Dom's suggestion of a coffee grinder grip in a close grained timber for one of your bigger spinners.

Mike 
Thanks Mike! no I'm not using that mini lathe anymore, I got rid of it last year, it was just too small for my needs.
I'm using a nice wood turning lathe that could be converted to a metal lathe as well, by adding a few parts.
This is what I plan to do with mine.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: p-deverett on November 30, 2018, 11:32:49 PM
Tom, do you have a timeframe for the plates?

Thanks Peter
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on November 30, 2018, 11:41:42 PM
Quote from: p-deverett on November 30, 2018, 11:32:49 PM
Tom, do you have a timeframe for the plates?

Thanks Peter

Hello Peter!

I'm trying like mad to get them finished for Christmas!

Cheers!

Tom
Title: Re: Penn 9/0 Side Plates
Post by: p-deverett on December 01, 2018, 04:33:36 AM
Thanks Tom sounds great.

Peter
Title: Re: Penn 9/0 Side Plates
Post by: Tiddlerbasher on December 01, 2018, 12:31:34 PM
Sal how did you fit the shaft into the wooden knob? Interference/push fit?
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on December 01, 2018, 02:39:31 PM
Quote from: Tiddlerbasher on December 01, 2018, 12:31:34 PM
Sal how did you fit the shaft into the wooden knob? Interference/push fit?
Chris check your PM, I don't want to keep posting about my handles on Tom's 9/0 thread.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: twotone on December 16, 2018, 05:10:32 AM
Tom how are the 9/0 plates coming along ?
Title: Re: Penn 9/0 Side Plates
Post by: Shark Hunter on December 17, 2018, 06:38:39 AM
You can't rush perfection. ;)
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on December 17, 2018, 01:21:17 PM
 Waiting on the anodizer!

Things kinda slow down for the holidays, hopefully this week.

Tom
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on December 17, 2018, 01:53:58 PM
Tom,


Thank you for another fine project offered to us! What colors are you planning?


thanks,

John
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on December 17, 2018, 03:00:24 PM
Quote from: thorhammer on December 17, 2018, 01:53:58 PM
Tom,


Thank you for another fine project offered to us! What colors are you planning?


thanks,

John

I kept it simple, Silver, Black, and Ice Blue.
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on December 17, 2018, 06:24:34 PM
Tom, I'll take one silver & one ice blue.         Rudy
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on December 17, 2018, 06:30:05 PM
I'll be having the same, silver and ice blue.
Title: Re: Penn 9/0 Side Plates
Post by: bill19803 on December 18, 2018, 01:07:13 AM
Tom\please  change  my  previous  request  from  one red  one  black    to  one  black   one  silver

any  thoughts  on  price ??
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on December 22, 2018, 09:18:10 PM
Hello All,

I got the 9/0 plates back from the anodizer and they look sharp! I did make one change... instead of Ice Blue, I went with a Teal color that I think looks great. Since these are such a small batch, I decided to experiment with a new color. I've been using this approach with the last few projects with limited success.

Silver, Black, and Teal will be available after the new year. I ran out of time making eccentric levers for these plates as well as harness lugs. It's time to hang it up for the year and enjoy family and friends!

See you all next year, and as always, thanks for the business!
Title: Re: Penn 9/0 Side Plates
Post by: erikpowell on December 22, 2018, 09:43:19 PM
Bula Tom & Merry Christmas to all !

Can I raise my hand for a set of those gorgeous teal plates please?

Vinaka!

Best regards to all!
Title: Re: Penn 9/0 Side Plates
Post by: Swami805 on December 22, 2018, 09:58:00 PM
Looking good! Put your feet up. Happy Holidays!
** I'd like a set in teal too**
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on December 22, 2018, 10:14:53 PM
OK then Tom, 1 set in silver & I'll try out 1 set in teal. Merry Christmas & Happy New Year.       Rudy
Title: Re: Penn 9/0 Side Plates
Post by: Darin Crofton on December 22, 2018, 11:24:27 PM
I'm in for a teal set, thanks and happy holidays, Tom!
Title: Re: Penn 9/0 Side Plates
Post by: xjchad on December 23, 2018, 12:31:32 AM
Those look killer Tom!
Title: Re: Penn 9/0 Side Plates
Post by: Shark Hunter on December 23, 2018, 01:03:06 AM
Enjoy the down time Thomas.
I appreciate everything you do for us.
You have a Merry Christmas with your Family. ;)
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on December 23, 2018, 01:04:58 AM
Im in for a set of teal plates Tom.

Mike
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on December 23, 2018, 02:07:53 AM
Gorgeous color that teal, if you have more please put one aside for me.

Merry Christmas Tom!


Sal
Title: Re: Penn 9/0 Side Plates
Post by: steelhead_killer on December 23, 2018, 12:28:05 PM
(1) Black Set please... 8)

Thanks!

Andy
Title: Re: Penn 9/0 Side Plates
Post by: p-deverett on December 25, 2018, 01:15:59 AM
Tom, they look great.
Can you put me down for a silver set.

Thanks and Merry Christmas

Peter
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 03, 2019, 02:27:50 PM
I tallied up the build, and the out the door price is $163 a set. International will be a bit higher.... The kit includes the following:
Left and right Plate.
Delrin eccentric sleeve.
Color matched aluminum eccentric lever.
ABEC-5 SST bearings.
Stainless steel bearing cup.
Clicker assembly, click spring and hardware.
Stainless steel plate screws(Penn).
Stainless steel bridge screws(Penn).

I'll be back in the shop Saturday packing the kits.

Since this is a limited run, I'm going to use this thread as an order sheet. Those whom have already laid claim to a set will have priority. I'll be Pming folks Friday/Saturday. If there is anything left by next week, I'll list them on my website for the general public. Thanks for hanging in there waiting for these kits, I think you'll all be happy with them!

Tom
Title: Re: Penn 9/0 Side Plates
Post by: David Hall on January 03, 2019, 04:44:03 PM
im still in for one set in black.
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 05, 2019, 11:11:57 PM
Good afternoon folks,

I just finished Pm-ing those who wanted a plate set. As of right now, I only have one Teal set left.

Thanks for waiting for these plates!

Tom
Title: Re: Penn 9/0 Side Plates
Post by: David Hall on January 05, 2019, 11:35:48 PM
Check your account  for PayPal Payment in 20 minutes.
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 06, 2019, 06:17:52 AM
Tom did you get my PM with my email and address.

Mike
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 06, 2019, 05:02:10 PM
Quote from: mikeysm on January 06, 2019, 06:17:52 AM
Tom did you get my PM with my email and address.

Mike

Yes I did Mike.
Thank you!
Tom
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 06, 2019, 07:15:38 PM
I'll be sending invoices out later this week.
Thanks!
Title: Re: Penn 9/0 Side Plates
Post by: Sharky McCatcher on January 07, 2019, 12:43:03 AM
Hi Tom,
Put me down for a set of black 9/0 plates, please!
I sent you a PM including my email address.

Thanks!
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 07, 2019, 12:59:12 PM
Quote from: Sharky McCatcher on January 07, 2019, 12:43:03 AM
Hi Tom,
Put me down for a set of black 9/0 plates, please!
I sent you a PM including my email address.

Thanks!

Pm sent
Title: Re: Penn 9/0 Side Plates
Post by: Shark Hunter on January 10, 2019, 01:05:14 AM
Am I on the list Tom?
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 10, 2019, 01:59:33 AM
Quote from: Shark Hunter on January 10, 2019, 01:05:14 AM
Am I on the list Tom?

Yep! ;D
Title: Re: Penn 9/0 Side Plates
Post by: Shark Hunter on January 10, 2019, 02:43:40 AM
My Man! ;)
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 12, 2019, 10:19:13 PM
Invoices going out today!
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on January 12, 2019, 10:51:04 PM
oh yeah! you got a teal one left? MO on way to you for the silver set as discussed.
Title: Re: Penn 9/0 Side Plates
Post by: Maxed Out on January 12, 2019, 11:07:47 PM

Wow Tom, very nicely done....

.....and took a bit of staring till I realized no front harness, which really is icing on the cake !!

Bravo !!

Ted
Title: Re: Penn 9/0 Side Plates
Post by: steelhead_killer on January 12, 2019, 11:16:11 PM
Now the waiting game begins...

Will this side plate take two stock dogs or will custom ones be needed?

Thanks!

Andy
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 12, 2019, 11:30:13 PM
Quote from: steelhead_killer on January 12, 2019, 11:16:11 PM
Now the waiting game begins...

Will this side plate take two stock dogs or will custom ones be needed?

Thanks!

Andy

That Don't know Andy.

Daron and I discussed it and they should be stock. I don't double dog my reels so I will defer to those that do. I did remove as much material as possible to allow the second dog room to swing.

Tom
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 12, 2019, 11:31:43 PM
Quote from: Maxed Out on January 12, 2019, 11:07:47 PM

Wow Tom, very nicely done....

.....and took a bit of staring till I realized no front harness, which really is icing on the cake !!

Bravo !!

Ted

That's right Ted, no front lugs. This was discussed way back and the logic was that it wasn't needed with the one piece frame.

Tom
Title: Re: Penn 9/0 Side Plates
Post by: Frank on January 12, 2019, 11:57:56 PM
Really nice work, Tom!
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on January 13, 2019, 01:08:36 AM
Quote from: Cortez_Conversions on January 12, 2019, 10:19:13 PM
Invoices going out today!
When are the plates going out?  :P :P
Title: Re: Penn 9/0 Side Plates
Post by: Shark Hunter on January 13, 2019, 03:09:41 AM
That looks Amazing.
Modern Day Perfection! ;)
Tom don't play. ;D
I can't wait to get my hands on them.
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 13, 2019, 04:49:26 PM
Quote from: RowdyW on January 13, 2019, 01:08:36 AM
Quote from: Cortez_Conversions on January 12, 2019, 10:19:13 PM
Invoices going out today!
When are the plates going out?  :P :P

I'll be shipping all next week.
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 16, 2019, 07:47:57 PM
I have shipped about half the orders, the rest will go out Friday.
Thank you!
Tom
Title: Re: Penn 9/0 Side Plates
Post by: Fishamen7 on January 18, 2019, 10:34:04 PM
Hello Tom

Do you still have the teal set available?
I would like to purchase it.

Jason
Title: Re: Penn 9/0 Side Plates
Post by: David Hall on January 19, 2019, 12:00:23 AM
Mine arrived yesterday.
Thanks Tom.
Hope I can get to building it soon.
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 19, 2019, 01:11:57 AM
Quote from: Fishamen7 on January 18, 2019, 10:34:04 PM
Hello Tom

Do you still have the teal set available?
I would like to purchase it.

Jason

I have one customer that wants it, but I'll let you know Tuesday.
Tom
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on January 19, 2019, 01:12:53 AM
if that one was me, that's a yes.
Title: Re: Penn 9/0 Side Plates
Post by: Fishamen7 on January 19, 2019, 01:40:47 AM
Quote from: Cortez_Conversions on January 19, 2019, 01:11:57 AM
Quote from: Fishamen7 on January 18, 2019, 10:34:04 PM
Hello Tom

Do you still have the teal set available?
I would like to purchase it.

Jason

I have one customer that wants it, but I'll let you know Tuesday.
Tom


No problems

Thanks for letting me know

Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 19, 2019, 08:43:50 AM
Tom it looks like the side plates will do double dog and left hand reel. Is that the way it is.

Mike
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 19, 2019, 04:41:25 PM
Quote from: mikeysm on January 19, 2019, 08:43:50 AM
Tom it looks like the side plates will do double dog and left hand reel. Is that the way it is.

Mike

Yes, in theory they should take the left hand conversion. I've never seen it done, but I patterned them from the stock plates that do.

And yes, the plates are cut with as much room as possible for a second dog. I had Shark Hunter cut all the big Senators for me as patterns.

I personally don't do much double dogging, so that part will be up to you guys and gals.

Tom
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 22, 2019, 11:37:59 PM
I had a extra dog and it will work great just needs a custom dog spring. The dogs will be alternating.

Mike
Title: Re: Penn 9/0 Side Plates
Post by: steelhead_killer on January 23, 2019, 01:22:52 AM
Will you show us your custom dog?  I have been looking at how that will work given the layout of the space and action of the dog...

Quote from: mikeysm on January 22, 2019, 11:37:59 PM
I had a extra dog and it will work great just needs a custom dog spring. The dogs will be alternating.

Mike
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 23, 2019, 02:11:47 AM
As soon as I get home from work. I need to remove the sleeve from the bridge. So I can show how it works.

Mike
Title: Re: Penn 9/0 Side Plates
Post by: Swami805 on January 23, 2019, 02:43:59 AM
Like to see it too,Thanks
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 23, 2019, 08:30:00 AM
Here is a picture with Alan's second generation gear sleeve. With the ten tooth sleeve it will be different


Mike
Title: Re: Penn 9/0 Side Plates
Post by: steelhead_killer on January 23, 2019, 02:04:15 PM
Sorry I mean the placement and config for the dog spring

Quote from: mikeysm on January 23, 2019, 08:30:00 AM
Here is a picture with Alan's second generation gear sleeve. With the ten tooth sleeve it will be different


Mike
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 23, 2019, 03:20:50 PM
Tom, PM sent.
Title: Re: Penn 9/0 Side Plates
Post by: Cortez_Conversions on January 23, 2019, 03:44:11 PM
Quote from: sdlehr on January 23, 2019, 03:20:50 PM
Tom, PM sent.

Gotcha Sid, thanks!
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 23, 2019, 03:56:01 PM
There are already pictures Sal posted awhile ago. You need to search for the post. Tom made the slot for the spring and removed the material so all we need to do is make a spring.


Mike
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on January 23, 2019, 05:02:26 PM
Mike, yes I have a few pics, but those are with a stock plate.
Looking at your pic, I think there might be a better more effective way of setting that spring in, not that there is anything wrong with the way you're showing yours.
I won't be able to check until I receive my set, it is still on the way here.
I did not have much to do with this one, someone else was involved with the layout for customizing the double dog.
Let's keep in mind, Tom is doing all of us a favor, he did not have to do this for us.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: Darin Crofton on January 23, 2019, 05:22:19 PM
Quote from: Alto Mare on January 23, 2019, 05:02:26 PM
Mike, yes I have a few pics, but those are with a stock plate.
Looking at your pic, I think there might be a better more efficient way of setting that spring in, not that there is anything wrong with the way you're showing yours.
I won't be able to check until I receive my set, it is still on the way here.
I did not have much to do with this one, someone else was involved with the layout for customizing the double dog.
Let's keep in mind, Tom is doing all of us a favor, he did not have to do this for us.

Sal
Sal,
Do you mind doing a post on your dd install on these new plates? I'm going to try it on mine, but will need some good instructions being as it will be my first attempt. I think many will benefit besides me...  ;D
Thanks,
Darin
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 23, 2019, 06:06:06 PM
Quote from: mikeysm on January 23, 2019, 08:30:00 AM
Here is a picture with Alan's second generation gear sleeve. With the ten tooth sleeve it will be different


Mike
Mike, I presume you included the last sentence because in the photo the dogs will be alternating and we're not sure how it'll work with 2 more teeth on the sleeve ratchet gear? Maybe I shouldn't presume, but I'm not sure it'll still be alternating. Have we a rule, something like, "If it alternates with an even number of teeth it'll alternate with all numbers that are even"? I don't have enough gear sleeves to experiment, and although I bet someone could prove it mathematically, I'm not going to spend a lot of my time trying. My hunch is that this is true.
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 23, 2019, 08:23:15 PM
Quote from: Alto Mare on January 23, 2019, 05:02:26 PM
Mike, yes I have a few pics, but those are with a stock plate.
Looking at your pic, I think there might be a better more effective way of setting that spring in, not that there is anything wrong with the way you're showing yours.
I won't be able to check until I receive my set, it is still on the way here.
I did not have much to do with this one, someone else was involved with the layout for customizing the double dog.
Let's keep in mind, Tom is doing all of us a favor, he did not have to do this for us.

Sal

Sal I just stuck it in as a example. I will change it when i get another spring. It wont stay in place the way it is. As for ten teeth I wont know if it will change until I try one.


Mike
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on January 23, 2019, 08:50:24 PM
Quote from: sdlehr on January 23, 2019, 06:06:06 PM
Quote from: mikeysm on January 23, 2019, 08:30:00 AM
Here is a picture with Alan's second generation gear sleeve. With the ten tooth sleeve it will be different


Mike
Mike, I presume you included the last sentence because in the photo the dogs will be alternating and we're not sure how it'll work with 2 more teeth on the sleeve ratchet gear? Maybe I shouldn't presume, but I'm not sure it'll still be alternating. Have we a rule, something like, "If it alternates with an even number of teeth it'll alternate with all numbers that are even"? I don't have enough gear sleeves to experiment, and although I bet someone could prove it mathematically, I'm not going to spend a lot of my time trying. My hunch is that this is true.
With 8 teeth there will be a tooth every 45*, with 10 teeth there will be a tooth every 36*. Therefore the length of one of the dogs would have to be altered to maintain alternating dogs when switching a sleeve with a different number of teeth.          Rudy
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 23, 2019, 09:32:26 PM
Rudy, I think that's an oversimplification of the problem. When you add two more teeth you change the way both dogs contact the teeth, not just one. And they should both be affected to the same degree, no? With more teeth they'll travel a litter farther from the axis of rotation, but still maintain contact with each tooth to the same degree (not the same degree as before, that changes - each of the dogs contacts as much of each of the opposite teeth - I'm trying to say it's symmetrical). I think that as long as the dogs pivot the same distance from the axis of rotation the simultaneous (or alternating, take your pick) actuation of the dogs should be maintained. This is probably the wrong place to have this discussion and I'll try to find time to make it a thread of its own later.
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on January 23, 2019, 09:52:34 PM
Sid, if you look at the photos you will see that the piviot for the dogs is not 180* apart which throws a wrench into the monkey works.  :D :D
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 23, 2019, 10:04:51 PM
Quote from: RowdyW on January 23, 2019, 09:52:34 PM
Sid, if you look at the photos you will see that the pivot for the dogs is not 180* apart which throws a wrench into the monkey works.  :D :D
That throws a wrench into the monkey works the way you were trying to solve the problem (which was part of the oversimplification, too). I think in my explanation the pivots don't have to be 180* apart, they just have to be the same distance from the axis of rotation, and the dogs have to be the same length.
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on January 23, 2019, 10:17:20 PM
Have you ever looked at the double dog 113h bridges from Black Pearl? He sells it with a 10 tooth sleeve which gives alternating dogs. By switching to a 8 tooth sleeve it becomes simaltanious dogs with the same dogs.
Title: Re: Penn 9/0 Side Plates
Post by: steelhead_killer on January 23, 2019, 10:33:43 PM
Is that spring going to stay put?

Quote from: mikeysm on January 23, 2019, 03:56:01 PM
There are already pictures Sal posted awhile ago. You need to search for the post. Tom made the slot for the spring and removed the material so all we need to do is make a spring.


Mike
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 23, 2019, 10:35:23 PM
Quote from: RowdyW on January 23, 2019, 10:17:20 PM
Have you ever looked at the double dog 113h bridges from Black Pearl? He sells it with a 10 tooth sleeve which gives alternating dogs. By switching to a 8 tooth sleeve it becomes simaltanious dogs with the same dogs.
Well, that sure blows my theory out of the water..... I'll have to find that picture, that may help me understand what was wrong with the way I'm thinking about this.
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on January 23, 2019, 10:36:32 PM
Quote from: mikeysm on January 23, 2019, 08:23:15 PM
Quote from: Alto Mare on January 23, 2019, 05:02:26 PM
Mike, yes I have a few pics, but those are with a stock plate.
Looking at your pic, I think there might be a better more effective way of setting that spring in, not that there is anything wrong with the way you're showing yours.
I won't be able to check until I receive my set, it is still on the way here.
I did not have much to do with this one, someone else was involved with the layout for customizing the double dog.
Let's keep in mind, Tom is doing all of us a favor, he did not have to do this for us.

Sal

Sal I just stuck it in as a example. I will change it when i get another spring. It wont stay in place the way it is. As for ten teeth I wont know if it will change until I try one.


Mike
No Mike, I wasn't talking about the spring, I meant there might be another position for that spring. But, from taking another look at your pic, it might now work, I will need to check when I get my set.

Thanks Mike.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 23, 2019, 10:38:51 PM
Quote from: RowdyW on January 23, 2019, 10:17:20 PM
Have you ever looked at the double dog 113h bridges from Black Pearl?
Those dogs are not the same length, and the pivots are not the same distance from the axis of rotation.... these are not the conditions I was speaking of.
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on January 23, 2019, 10:48:16 PM
Quote from: sdlehr on January 23, 2019, 10:38:51 PM
Quote from: RowdyW on January 23, 2019, 10:17:20 PM
Have you ever looked at the double dog 113h bridges from Black Pearl?
Those dogs are not the same length, and the pivots are not the same distance from the axis of rotation.... these are not the conditions I was speaking of.

Sid, check here, the very first Senator with double dogs that was ever made. Most have forgotten about it ...the rest of the double dog upgrades just followed from this one:
http://alantani.com/index.php?topic=3077.msg19705#msg19705
There are lots of pics on dogs and springs, some even have mixed dogs, as one for the 9/0 and the other for the 6/0.
Keep in mind, this was done a long time ago, I now shape the dog at the tip and at its side to keep it closer to the ratchet for a better contact.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: xjchad on January 23, 2019, 10:58:39 PM
The spring would work that way if there was a small bend on the end of it

(https://i.imgur.com/pgp5Unbl.jpg)
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 23, 2019, 11:09:58 PM
Quote from: Alto Mare on January 23, 2019, 10:48:16 PM
There are lots of pics on dogs and springs, some even have mixed dogs, as one for the 9/0 and the other for the 6/0.
Keep in mind, this was done a long time ago, I now shape the dog at the tip and at its side to keep it closer to the ratchet for a better contact.

Sal
Thanks, Sal, but looking at those pictures I just saw different variations of dogs with the same sleeve. I think the easiest way to solve this is for Mike to report back and show pics with the 10-tooth sleeve and we can see if the dogs remain alternating..... in the end I think that'll either prove or disprove my point.....
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on January 23, 2019, 11:25:18 PM
That's what I was trying to show you Sid. Rudy mentioned it already, it really doesn't matter on the gear ratchet, yes it would help and might even get lucky by changing from 8 tooth-9 tooth, or 10 tooth. The fact is that you'll be able to make it as you would want it by trimming one dog or both, in some cases even longer dog when fine tuning.
Your theory is also correct if you're trying to make one part kit, but there are different variations.
That would be the part that I leave to you, maybe Tom, or Doc. I do things by actual test, no math🙂

Sal
Title: Re: Penn 9/0 Side Plates
Post by: mikeysm on January 24, 2019, 12:08:46 AM
Quote from: xjchad on January 23, 2019, 10:58:39 PM
The spring would work that way if there was a small bend on the end of it

(https://i.imgur.com/pgp5Unbl.jpg)

Yes that is what I am planning on doing making a bend at the end. I just ordered a few dog springs to see if they are long enough.
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on January 24, 2019, 06:21:42 PM
I just received my set, Tom they look amazing.
The only way the new dog spring would work is the way Mike was showing it. I believe Tom did his homework on this one, it will work to perfection, with no alterations to the plate. The spring need to be a little stiffer that the stock spring though.

(https://i.imgur.com/aN8Nwsv.jpg)

Not an easy color to match, but I think I got it
(https://i.imgur.com/ZrA6Qgh.jpg)

Very nice Tom,


Thank you!

Sal
Title: Re: Penn 9/0 Side Plates
Post by: David Hall on January 24, 2019, 06:28:26 PM
great color match Sal you nailed it.
Title: Re: Penn 9/0 Side Plates
Post by: Darin Crofton on January 24, 2019, 07:48:20 PM
Great match, Sal, are you going to use a silver frame?
Title: Re: Penn 9/0 Side Plates
Post by: steelhead_killer on January 24, 2019, 08:01:07 PM
Nailed it!  Stunning!

Quote from: Alto Mare on January 24, 2019, 06:21:42 PM
I just received my set, Tom they look amazing.
The only way the new dog spring would work is the way Mike was showing it. I believe Tom did his homework on this one, it will work to perfection, with no alterations to the plate. The spring need to be a little stiffer that the stock spring though.


Not an easy color to match, but I think I got it

Very nice Tom,


Thank you!

Sal
Title: Re: Penn 9/0 Side Plates
Post by: Swami805 on January 24, 2019, 08:34:32 PM
Looks great Sal, matches well with the plates. Looks easy for the 2nd dog, thanks for the picture. Need to scrounge something for a spring.
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on January 24, 2019, 09:06:12 PM
Thanks guys, but Tom deserves all the credit here. Everything he has been offering has been spot on.


Quote from: Darin Crofton on January 24, 2019, 07:48:20 PM
Great match, Sal, are you going to use a silver frame?
Yes Darin, I have a black on blue frame and a silver will go on this one.

(https://i.imgur.com/ey3RCeA.jpg)

The blue torpedo handle will eventually get remade, that was made a while ago and I think it could be a little large.


Sal
Title: Re: Penn 9/0 Side Plates
Post by: Darin Crofton on January 24, 2019, 09:26:23 PM
That's gonna look sweet, Sal! I have the teal plates and going to use a black
frame because I have the black tiburon handle/knob, wish I had a black star too.
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on January 24, 2019, 09:29:27 PM
Black will also look good. ;)
Title: Re: Penn 9/0 Side Plates
Post by: Darin Crofton on January 24, 2019, 09:33:07 PM
Yessir, I love all of Tom's products, the fit n finish is spectacular!
Title: Re: Penn 9/0 Side Plates
Post by: sdlehr on January 25, 2019, 12:18:00 AM
Sal, I'm pairing the red knob you sent me with the black 9/0 plates that I should be getting in a few days. Pics coming soon.
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 15, 2019, 09:22:03 PM
Finally got a chance to assemble the latest plates I got from Tom
(https://i.imgur.com/kAUtKRz.jpg)
(https://i.imgur.com/rfeZri1.jpg)

Tom, these are perfect!...Thank you!

Sal
Title: Re: Penn 9/0 Side Plates
Post by: 1badf350 on June 15, 2019, 09:59:55 PM
Sal it's beautiful and your handle is perfect!
Title: Re: Penn 9/0 Side Plates
Post by: Crow on June 15, 2019, 10:48:41 PM
Looks almost too nice to use !
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 15, 2019, 11:37:15 PM
Thanks guys! Chris, I have a couple 9/0's this one is my favorite.

Sal
Title: Re: Penn 9/0 Side Plates
Post by: Rocket Dog on June 15, 2019, 11:51:28 PM
wow that looks amazing.... excellent craftsmanship!
Title: Re: Penn 9/0 Side Plates
Post by: thorhammer on June 16, 2019, 12:35:49 PM
Stunning, Sal! and Happy Birthday!
Title: Re: Penn 9/0 Side Plates
Post by: broadway on June 16, 2019, 02:22:57 PM
Happy Birthday Sal! That is one heck of a reel and that handle fits her beautifully.
Nice job, pal.
Dom
Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 16, 2019, 03:55:34 PM
Thanks guys!
Dom, make sure Jack spoils you today...Happy Father's Day!

Sal
Title: Re: Penn 9/0 Side Plates
Post by: AC49 on June 16, 2019, 06:00:40 PM
Happy Birthday Sal hope you have a good 1  :)

Regards
AC49
Title: Re: Penn 9/0 Side Plates
Post by: Jerseymic on June 16, 2019, 10:02:22 PM
Happy birthday Sal, stunning reel.

Mike.

U.K.

Title: Re: Penn 9/0 Side Plates
Post by: Alto Mare on June 17, 2019, 12:31:35 AM
I thank you guys for the birthday wishes, but my birthday was a couple of weeks ago ;D.
I'm getting really close of being a senior citizen  ::)

Sal
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on June 17, 2019, 01:33:37 AM
Sal, I think you are past the senior citizen threshold. It usually starts at 55.  ;D  Welcome to the club.
Title: Re: Penn 9/0 Side Plates
Post by: Benni3 on June 17, 2019, 02:33:15 AM
Happy birthday,,,,,,,, :D that reel is fantastic,,,,,,, ;D
Title: Re: Penn 9/0 Side Plates
Post by: Darin Crofton on June 17, 2019, 05:26:37 AM
Sweet looking reel, Sal, you knocked it out of the park on this one!!!
Title: Re: Penn 9/0 Side Plates
Post by: p-deverett on April 07, 2020, 12:06:27 AM
I have just assembled my 9/0 with tom's side plates and frame and have used an older bushing 9/0 as my donor reel, however there is excessive play with the spool, about 1/8" so too much to take out with adjusting the bearing and packers. Looking at Mystic parts I see there are two 9/0 spools, mine is chrome and marked 29-115 and I see the newer one are black aluminum 29L-115.

Do I need a different spool for this build to work?

Thanks Peter
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on April 07, 2020, 12:11:07 AM
Yes Peter, you need the spool for the later ball bearing model.       Rudy
Title: Re: Penn 9/0 Side Plates
Post by: p-deverett on April 07, 2020, 02:09:26 AM
Thanks Rudy, I will look for a new donor real?

Peter
Title: Re: Penn 9/0 Side Plates
Post by: RowdyW on April 07, 2020, 04:39:12 AM
It will be easier to just buy a new or used spool from ebay. The chrome ball bearing model will work also but the weight savings with an aluminum spool is tremendous. I've used the spool from the China model H2 with no problem. It's also cheaper then the H model (both available at Mystic).
Title: Re: Penn 9/0 Side Plates
Post by: p-deverett on April 07, 2020, 10:19:03 PM
Thanks Rudy, I have looked at the .mysticparts.com site and only see 1 spool listed for the older and new 9/0
29L-115
1182514   29L-115 Spool, Aluminum (Black)

This looks like what I need to finish my build.

Thanks Peter