Hi all,
I'd like to ask if any of you know the pinion bearing size for Avet JX 6/3, mine is a two speed. I think it's 0.1875x0.6875x0.25 but I'm not so sure, I don't have the reel to open up right now.
I vaguely remember that it's not the same as MX/LX/SX which are 0.25x0.625x0.196 (R4 size)
Thanks for your help!
.250 x .625 x .195 for a JX 6/3 I just measured a spare pinion bearing I have
If in doubt call Avet and find out. Their bearings are $5 if you want order another one from them. Yeah, they're cheap bearings that die easily.
Still fishing the stock pinion bearing on my JX 6/3 that I bought around 2004. Landed many of mean fish with that reel like marlin, sails, yt and such. Landed this tuna from a anchored boat with 40 lb test last year with that same stock pinion bearing in the reel.
(https://lh3.googleusercontent.com/tHKxVrrvBx-c6cPRkXZtja6HNo7pgQaI6Rh5-8S4qnz49wPOVv5Kz6UOmJuxn2FkM5a1yECiW_4X-a9QLb5-mKyf1-KaMmbeQAP3fE0aZkopGd8ZGCXT-qgkapibiTJviua7HHvTdXyUhv4XwX_5DNtHrpGE0l-NaGlLCORekhx5_OszQhKfcTYFkAvBuyK5KzpnZkIcxQNoAz5q0uZqjqVgRF2Zg4RVc0exLNFu8UYs80EZKm0wOuYsgTlmS4C6qlN4iAsIhQNJkz58dhZ77rH_obWx3HutedCT2HTOhTW_vfUEjnGSB92SpT1IQmsBMMchu83sM0AroWJuO4KHrbzDrSBNGSWrrfscBfR_XZ_0OESK0fQcuTGU_B9ZH4JHCw961Q1LPYay4wsZFCJFLwporZAFvAlzSWMaBYe2Ru1lxyfMWjMClqqqFgF16OKQXN8KkGenMEwFzj73pYCj0yK7WXmEKkv5sb34Sk17TioheOrJjBx_wLmFDJRBQDiunjyWrYJeGFOzYhBtNmPK0PKgTnll2OjfDMZOUddsLcf1d872-f5_gYCRPyGrDM6bKmJJMpTJO9wSaQ3b9MfFrdM19KNJ8rD3Pg9yjdAd4O4Ec7gmzq8Cjic=w525-h700-no)
Thanks so much, so it's the same R4 bearing as the S/M/La models.
Yeah I have the MXJ and JX 6/3 for 5 years now, all original bearings. I guess with good service and properly setting the drag preset you avoid bearings failures. I do see quite a few SXJs with pinion bearing failures belonging to my clients.
Just that I run a reel service workshop and stocking up some bearings but don't have my reel to open and measure myself :D
Quote from: mahfudzmn on August 05, 2017, 02:26:45 PM
Thanks so much, so it's the same R4 bearing as the S/M/La models.
Yeah I have the MXJ and JX 6/3 for 5 years now, all original bearings. I guess with good service and properly setting the drag preset you avoid bearings failures. I do see quite a few SXJs with pinion bearing failures belonging to my clients.
Just that I run a reel service workshop and stocking up some bearings but don't have my reel to open and measure myself :D
Ding,ding, ding. I think we have a winner here, check the bold print above.
Well thanks to this forum I knew about the Avet pinion bearing thingy even before owning one hahaha