As I reassembled the reel. I spotted stuck to the greased side plate a VERY small flat washer. The might be the smallest washer I've ever seen. Maybe they call this a spacer. Idk. It is so fine it looks like stripped thread pulled off a 3/16 hole . Small and thin. This is not lock washer. It is flat . Where does this washer go. The schematic isn't clear on what or where this goes. Any help would be great. This is my first reel using the grease bearing packer. Very frustrating little Pia. This is the second time I have taken apart. I did not take the level winder apart. So it's not that small spacer. Washer in question is smaller. Or from the picture it looks smaller.
Thanks guys
From your description it sounds like a shim not a washer. Could it have come from under a bearing in one of the bearing cups or something? never opened a lexa, Just a guess
Swami you were right . It was a shim behind the cast control knob. I'm not sure how it was stuck in the grease on the Side plate, but hey I got it. It feels like butter now. Thanks for the help.