Print Page - Okuma parts and schematics

Title: Okuma parts and schematics
Post by: triumphrick on July 05, 2018, 08:38:42 PM

I have searched both Okuma Intl and Okuma USA, and cannot locate their parts and schematics lists..

Any help with a link would be greatly appreciated.

I have two new Makaira 130's, gunmetal that took a dive out of a customers truck and are beat up...in need of sideplates etc, so if someone has that particular reel, I would appreciate that schematic..

Thanks!

Title: Re: Okuma parts and schematics
Post by: alantani on July 05, 2018, 09:33:52 PM

contact ron almansa directly at ronald@okumafishingusa.com

Title: Re: Okuma parts and schematics
Post by: boon on July 06, 2018, 12:03:06 AM

130: https://www.okumafishing.com/Templates/att/MK-130II-Parts-list.pdf?lng=en

130SEa: https://www.okumafishing.com/Templates/att/MK-130II-SEa-Parts-list.pdf?lng=en

Title: Re: Okuma parts and schematics
Post by: Wolli on July 06, 2018, 12:16:10 AM

here are the schematics

www.okuma.com.tw/chinese/service/download.php?page=0&s_model=1&s_model2=0&s_model3=0#pa

or here

www.okumafishing.com/en/product/Makaira-Lever-Drag-Reel/makaira-lever-drag-reel.html

Title: Re: Okuma parts and schematics
Post by: triumphrick on July 06, 2018, 01:40:40 PM

Awesome! Thanks as always....

I was pretty frustrated yesterday after being on hold three separate times for over a half-hour each time..

The Okuma parts number I have always used is 909 923 2828 opt 1....

Thanks for Rons info, I will email him this morning..

This is a pretty sad sight for a month old reel...

Title: Re: Okuma parts and schematics
Post by: steelfish on July 07, 2018, 12:59:44 AM

and the sideplate got cracked or bent?

or the owner just want to have it shiny again?

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Okuma Tutorials and Questions => Topic started by: triumphrick on July 05, 2018, 08:38:42 PM