I have a 130H that I'm servicing. Cam housing uses 3 screws. two had heads broken off for which I was able to remove the remaining screw from within. Mystic parts does not reflect these screws on the schematic so I cannot tell what part number it is.
If anyone knows or can provide the screws for $$ please let me know. Thank you in advance
(http://alantani.com/gallery/24/medium_14016_13_07_18_8_21_15.jpeg) (http://alantani.com/index.php?action=gallery;sa=view;id=24872)
(http://alantani.com/gallery/24/medium_14016_13_07_18_8_22_04.jpeg) (http://alantani.com/index.php?action=gallery;sa=view;id=24873)
I had this same exact problem on an 80STW once. Screws were not on the schematic. Head sheared off one of them.
I eventually, after spending a lot of time on the internet, took it up to Surfland. I knew she had a ton of parts on hand. We went though all the screws and matched it by comparing them side by side. I was lucky enough to have one good one. I can't for the life of me remember what the part number was.......
Sorry I can't be of more help but I feel your frustration.
*You could always try calling Penn directly. Maybe they know or have some.
Quote from: FatTuna on July 14, 2018, 07:24:11 AM
I had this same exact problem on an 80STW once. Screws were not on the schematic. Head sheared off one of them.
I eventually, after spending a lot of time on the internet, took it up to Surfland. I knew she had a ton of parts on hand. We went though all the screws and matched it by comparing them side by side. I was lucky enough to have one good one. I can't for the life of me remember what the part number was.......
Sorry I can't be of more help but I feel your frustration.
*You could always try calling Penn directly. Maybe they know or have some.
Thanks. Ill give them a try Monday then. I though Mystic was their main parts people considering they're huge on PENN parts only
I get most of my parts directly from Penn (PureFishing). They don't typically have vintage Penn parts though. I get those either from Ebay or Mystic (Scott's).
I have no idea if they'll be able to tell you what screw that is, just thought it was worth a shot.
Quote from: FatTuna on July 14, 2018, 11:20:00 PM
I get most of my parts directly from Penn (PureFishing). They don't typically have vintage Penn parts though. I get those either from Ebay or Mystic (Scott's).
I have no idea if they'll be able to tell you what screw that is, just thought it was worth a shot.
Thanks a lot. I found the part it's 50-704 they used to be the clicker screw for old 704Z model spinning reels!! I won't forget this now lol
Glad you got it sorted out.