Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Penn International Tutorials and Questions => Topic started by: ReelDragJam on October 01, 2018, 06:39:44 PM

Title: International 50 Series Interchange
Post by: ReelDragJam on October 01, 2018, 06:39:44 PM
Hey guys and gals. Quick question. I just started a International 50TW rebuild and it's bad. Side plates are rough. Was wondering if anyone knows whether or not any  of the side plates from other models are direct interchanges, either side. Can find 50S, 50T and 50W plates no probs. Thank you for your help.
Title: Re: International 50 Series Interchange
Post by: 1badf350 on October 01, 2018, 07:17:52 PM
Im curious about this too. Will first gen international plates work on international II reels
Title: Re: International 50 Series Interchange
Post by: alantani on October 01, 2018, 10:53:37 PM
i believe they should.  you should be able to mix and match parts. 
Title: Re: International 50 Series Interchange
Post by: ReelDragJam on October 02, 2018, 07:28:58 AM
I was thinking you could also but wasn't sure. If I get one and try it out I will post my results. Thanks for the reply.
Title: Re: International 50 Series Interchange
Post by: Penn on October 02, 2018, 05:56:25 PM
Without doing any research, my first thought is no, the 50S/50SW right side plate can not work on the 50T/TW.  

The 50S/SW/T/TW Left side plates should all be interchangeable.

tony
Text only | Text with Images