Reel Repair by Alan Tani

General Maintenance Tips => Ordering Reel Parts => Topic started by: alantani on January 17, 2012, 12:22:53 AM

Title: bearing sizes by reel - a running list
Post by: alantani on January 17, 2012, 12:22:53 AM
jimmer had a great idea of having a running list of the different sizes of bearings for all the reels.  and he's right.  if everyone chips in, this could be a real time saver for everyone.  the list will go by manufacturer (penn, shimano, etc.), then by model name (say, curado), then by model number (100D, 300E) and then by bearing location with the dimensions (left spool 4x11x4).  just post your bearing dimensions here and the moderators will add it to the list.  jimmer, thanks for the great idea!
Title: Re: bearing sizes by reel - a running list
Post by: Dominick on February 22, 2012, 12:15:02 AM
Wow! This thread didn't go anywhere ???.  I searched for this thread because I need the size for spool bearings for a Penn International 50VSW does anyone have the answer?  If not I will take the reel apart and measure them and post the size here. 
Dominick
Title: Re: bearing sizes by reel - Daiwa Saltiga 30
Post by: Irish Jigger on February 22, 2012, 01:04:46 AM
Here you go,  Daiwa Saltiga 30.
4x11x4mm #6-1 reqd
8x14x4mm #11-1 reqd
3x8x4mm #23-1  reqd
8x14x4mm #60-1 reqd
5x8x2.5mm #71-2 reqd

#Ref Schematics.

http://www.daiwa.com/PartsDiagram/PartsDiagram/SA15-30.pdf

Title: Re: bearing sizes by reel - Penn 113H
Post by: Irish Jigger on February 22, 2012, 01:15:28 AM
 And another,
Penn 113H, Spool bearings, 0.1250 x 0.3750 x 0.1562 inch-2 reqd.
Title: Re: bearing sizes by reel - Penn squidder
Post by: rjones on February 26, 2012, 02:36:13 PM
Penn squidder 140 uses 2 each .125" X .500" X .1719"
Title: Re: bearing sizes by reel - Shimano Calcutta CTE250DC
Post by: D impala95 on February 28, 2012, 04:11:32 AM
Shimano Calcutta CTE250DC

Pinion                8x12x3.50mm
Worm gear         5x8x2.50mm
Spool                 3x10x4mm (2)
Drive shaft inner 5x8x2.50mm
Drive shaft outer 8x12x3.50mm
Grip                   4x7x2.50mm (4)
Title: Re: bearing sizes by reel - Shimano Trinidad TN30
Post by: Bryan Young on February 28, 2012, 05:50:15 AM
Shimano Trinidad TN30
Spool Bearing (right) - 6 X 12 X 4 mm
Spool Bearing (left) - 4 X 11 X 4 mm
Title: Re: bearing sizes by reel - Penn 330GTI & 320GTI
Post by: Irish Jigger on February 28, 2012, 09:42:52 AM
Penn 330GTI & 320GTI.
Bridge bb, 8x16x5 mm.
LS Spool bb,4x11x4 mm./
                 
Title: Re: bearing sizes by reel - Shimano Trinidad TN16
Post by: Irish Jigger on February 28, 2012, 12:36:28 PM
Shimano Trinidad TN16.
LHS Side Plate 4x11x4mm.
RHS Spool 6x12x4mm.(no part# shown on schematics.)
LH end Drive Shaft 5x9x3mm.
RH end Drive Shaft 10x15x4mm.
Title: Re: bearing sizes by reel - Pflueger President WLPL
Post by: D impala95 on February 29, 2012, 10:58:48 AM
Pflueger President WLPL

Side cover spool bearing            3x10x4
Mid shaft spool bearing              5x11x4
Spool bearing under tension cap 3x8x4
Drive shaft                                5x9x3
Worm shaft                               4x7x2.5
Grip/handle (4)                         5x8x2.50
Title: Re: bearing sizes by reel - Shimano Charter special
Post by: Jimmer on March 03, 2012, 04:07:30 PM
Shimano Charter special  1) 12x17x5   2) 5x11x4  1) 7x17x5
Title: Re: bearing sizes by reel - Avet MXL, JX, and HX. Daiwa Saltist LD35H
Post by: ebnash on March 07, 2012, 06:14:38 AM
The following are only spool bearings...

Avet MXL                .185 X .5 X .195
                            .185 X .311 X .125

Avet JX                   .185 X .685 X .250
                            .185 X .375 X .125

Avet HX                   6 X 19 X 6mm
                             6 X 12 X 4mm

Daiwa Saltist LD35H    7 X 17 X 5mm
                             6 X 13 X 5mm
Title: Re: bearing sizes by reel - Avet HX Raptor - 2012 Production
Post by: ebnash on March 20, 2012, 02:34:00 PM
Avet HX Raptor - 2012 Production(Keep in mind that this may not cover your reel as I have seen other dimension for HX Raptor in earlier productions)

Left Spool – 6 X 12 X 4
Right Spool – 6 X 12 X 4
Left Pressure Plate – 6 X 19 X 6
Right pressure Plate - 6 X 12 X 4
Inner Drive Shaft - .375 X .625 X .156
Outer Drive Shaft - .375 X .625 X .156
Right Plate – 6 X 19 X 6
Title: Re: bearing sizes by reel - Abu 6501-C3 Older Model
Post by: ebnash on March 20, 2012, 03:53:32 PM
Abu 6501-C3 Older Model
                                      Qty
Spool Bearings 4 X 10 X 4       2
Pinion Bearing  8 X 13 X 4       1
Title: Re: bearing sizes by reel - Penn 345 GTi Gear Stud
Post by: reel bob on March 20, 2012, 06:22:26 PM
Penn 345 GTi Gear Stud - Part # 55-80ST - .500 x .875 x .2188 or 1/2 x 7/8 x 7/32

Heres the size...Problem I have is where to purchase this size bearing other than Boca or Scotts. There has to be cheaper prices than what they want...Any Help?
Title: Re: bearing sizes by reel - a running list
Post by: Ken_D on March 20, 2012, 06:48:03 PM
Quote from: reel bob on March 20, 2012, 06:22:26 PM
Penn 345 GTi Gear Stud - Part # 55-80ST - .500 x .875 x .2188 or 1/2 x 7/8 x 7/32

Heres the size...Problem I have is where to purchase this size bearing other than Boca or Scotts. There has to be cheaper prices than what they want...Any Help?

Hi. This is that top bearing under the star. the common Industry "confusers" are R1412, R1412ZZ, R6-1/2, and R6ZZ-1/2.  Try AST bearings in New Jersey....the stainless ones were 7.00 a couple of years back.

If fully rusted closed, they can be made runnable till you get one. All you need is a rotary tool, like an actual dremel, or one of the clones. Remove bearing off driveshaft, adjust channel-lock or vise grip type pliers to hold the OD of the brg.

Take a cutoff wheel, and cut a slot across the inner race. Use a big screwdriver to loosen the bearing up, so you can re-grease.The assumption being that the rust has not totally disintegrated the balls, or the cage. (Usually not)  This will get you by, sometimes hardly even rough. Most times, a little thump, but runnable till the new one gets in.
Title: Re: bearing sizes by reel - Shimano TLD15
Post by: Irish Jigger on March 21, 2012, 04:40:34 PM
Shimano TLD15
(2) - 6x12x4mm
(2) - 7x17x5mm
All on spindle.
Title: Re: bearing sizes by reel - ABU Ambassadeur 5000-5000A
Post by: treidm on March 21, 2012, 09:43:57 PM
ABU Ambassadeur 5000-5000A

Left & Right Spool
3 x 10 x 4
Title: Re: bearing sizes by reel - Penn 9500SS
Post by: redsetta on March 27, 2012, 10:04:30 PM
Penn 9500SS

PS The main gear bearings are imperial (3/8 x 7/8 x 9/32), but they're all translated to metric here in NZ.
Title: Re: bearing sizes by reel - Penn Formula 10KG (Two Speed.)
Post by: Irish Jigger on April 24, 2012, 07:18:03 PM
Penn Formula 10KG  (Two Speed.)
LS Spool 10x26x8 mm.
RS Spool 7x22x7 mm.
RS Spindle 7x13x4 mm.
Handle Drive Shaft 10x26x8 mm.
Title: Re: bearing sizes by reel - a running list
Post by: LTM on June 12, 2012, 05:02:06 PM
Alan and Bryan,

Where do I find this BB list?  Ive been documenting my reels with drag and BB dimensions, I may be able to contribute to the list.

Leo
Title: Re: bearing sizes by reel - a running list
Post by: redsetta on June 12, 2012, 09:16:33 PM
G'day Leo,
Just post here and, as the number of posts grows, it'll be compiled into a standalone list.
Great work documenting these BB/drag sizes by the way. ;)
Cheers, Justin
Title: Re: bearing sizes by reel - a running list
Post by: Ken_D on August 21, 2012, 09:25:46 PM
Quote from: reel bob on March 20, 2012, 06:22:26 PM
Penn 345 GTi Gear Stud - Part # 55-80ST - .500 x .875 x .2188 or 1/2 x 7/8 x 7/32

Heres the size...Problem I have is where to purchase this size bearing other than Boca or Scotts. There has to be cheaper prices than what they want...Any Help?

AST in CA/NJ about 8.00 and adds,  SMB in England for about  6 UKP for the Japanese ones, and 2 UKP for the Chinese ones plus adds and wait.   SMB is calling them SR6ZZ-1/2  Both the Japan and the Chinese are stainless.
Title: Re: bearing sizes by reel - Pro Gear CS500, CS550, CS501, CS551
Post by: Bryan Young on September 17, 2012, 05:05:23 PM
Right Side - 6 x 12 x 4 mm
Left Side - 0.125 X 0.375 X 0.155 inches
Title: Re: bearing sizes by reel - TLD 15/30 20/40 star drag
Post by: Dr. Jekyll - AKA MeL B on September 17, 2012, 07:40:27 PM
courtesy of Alan Tani

LS 4 x 11 X 4 mm
RS 6 x 12 x 4 mm
Title: Re: bearing sizes by reel - Pro Gear PG540/541/545
Post by: Dr. Jekyll - AKA MeL B on September 17, 2012, 07:46:37 PM
courtesy of Boca Bearings

Both Sides  ID 0.1250in x OD 0.3750in x Width 0.1562in
Title: Re: bearing sizes by reel - a running list
Post by: erikpowell on September 17, 2012, 11:08:40 PM
Trinidad TN50

spool bearings
6x13x5
7x14x5

bearing underneath main shaft- TGT0458
6x10x3
Title: Re: bearing sizes by reel - a running list
Post by: Mike La Franchie on January 10, 2013, 01:17:25 AM
Shimano TR200G there is only one bearing   Part number TGT0596   7x14x5mm no shields

Okuma Zeta ZE80(Also known as a Diezel DZ80)     
drive gear   part number 01102006-5   9x17x5mm
pinion gear   part number 01091705-5       10x20x6mm

Penn 760L               
Drive Gear part number 20-6500 bearing size 9x17x5
Pinion Gear, part number 20-760, bearing size 10x18x5mm.

Mitchell Quartz 350
Drive gear bearings 7x12x2.5
pinion gear bearing 8x14x3.5

I've got the drag washers sizes for the above reels if anyone wants them.
Title: Re: bearing sizes by reel - a running list
Post by: Irish Wake on March 01, 2013, 12:13:23 AM
Penn 225LD Bearing
Part#
55-116  Spool Bearing #55  .186 X.500X.196      2 req
26N-25   F/L Spool,Br  #26A .272 X.748 X .234   1 req
26N-25   F/Spool Br     #26  .272 x .748 x .234   1 req
Title: Re: bearing sizes by reel - a running list
Post by: erikpowell on March 20, 2013, 02:20:41 AM
Shimano Tyrnos Single speed... with shimano part #'s

20/30   TGT0641   7x14x5       spool bearing x2         From Smoothdrag order set #78 (1ea 9x20x6 & 7x14x5)
          TGT0827   7x17x5        pressure plate                                      and  set #44 (1ea 7x17x5 & 7x14x5)
          TGT0813   9x20x6        RT side plate


50LRS  TGT0483   8x16x5        spool bearing x2                        Smoothdrag set #46  (1ea 8x16x5 & 8x19x6)     
         TGT1429   8x19x6        pressure plate                                           
         TGT1418  10x22x6        RT side plate                            Smoothdrag stocks single bearing

       If you need to replace BOTH spool bearings in the 50, you'll need an extra 8x16x5 (which Dawn doesn't list separately)                                       
                                      or an additional set 46.


Thanks, Erik
Title: Re: bearing sizes by reel - a running list - Shimano Beastmaster 20/50 2speed
Post by: erikpowell on March 26, 2013, 02:09:00 AM
Beastmaster 20/50 2 speed
(http://i1353.photobucket.com/albums/q680/fijigreen69/SANY0027_zps1081140b.jpg)

7x14x5 spool bearings x2   

7x17x5 Lt spool bearing

9x20x6 Rt side plate/pinion

sorry, no part #'s available... schematics don't seem to exist for this reel...if anyone knows where to find them please let me know
so I can file it away.
Thanks
Erik
Title: Re: bearing sizes by reel - a running list
Post by: Gxnefishing on April 05, 2013, 09:34:03 AM
Erik This may be what your looking for...
http://schematics.planetseafishing.com/downloads/shimano/multiplier/triton-series/triton-beastmaster-graphite-2-spd-20-50(90-33).pdf
Title: Re: bearing sizes by reel - a running list
Post by: erikpowell on April 06, 2013, 05:27:22 AM
Thanks !  ;)
Title: Re: bearing sizes by reel - a running list
Post by: erikpowell on June 07, 2013, 03:21:31 AM
Tiagra 30WLRS

Here's an easy one... all 4 bearings are the same size !!
spool x2 , left side & rt side pinion

4 @  7x19x6

Title: Re: bearing sizes by reel - a running list
Post by: erikpowell on June 07, 2013, 03:24:07 AM
Shimano Torsa 30

2 ea 10x19x5  inner/outer - handle

9x20x6  Pinion

2 ea 7x14x5 spool
1 ea 7x17x5 spool

Title: Re: bearing sizes by reel - a running list
Post by: erikpowell on June 07, 2013, 03:47:45 AM

Tiagra 50W
4 bearings, all same
shimano part # TT0033 -  8x22x7


Tiagra 50WLRSA
4 bearings, all same
shimano part # TT0576 -  8x22x7

Tiagra 80W
4 bearings all same
shimano part # TT0033 - 8x22x7

Tiagra 80WA
4 bearings all same
shimano part # TT0576 - 8x22x7
Title: Re: bearing sizes by reel - a running list
Post by: alantani on June 17, 2013, 05:41:51 AM
avet mxl 5.8:1

sn#mxl5.8r-11502



Left spool - 0.1875 x 0.500 x 0.196 - sr3-zz #3 $7

Right spool - 0.1875 x 0.3125 x 0.125 - sr156-zz  #7 $8

Pressure plate - 0.1875 c 0.375 x 0.125 - sr166-zz #7 $8

Drive shaft (two bearings) - 8 x 16 x 5 smr688-zz #5 $9

Right main side plate - 0.250 x 0.625 x 0.196 sr4-zz #3 $8
Title: Re: bearing sizes by reel - a running list
Post by: outsiderskip on June 25, 2013, 06:16:28 AM
 tyros 16 sizes
7x17x5
9x17x5
7x13x4
pete
Title: Re: bearing sizes by reel - a running list
Post by: alantani on August 18, 2013, 03:52:09 PM
progear classic series 500, 501, 550 and 551

left spool - 0.125 x 0.375 x 0.156
right spool - 6 x 12 x 4
Title: Re: bearing sizes by reel - a running list
Post by: NAD97 on October 15, 2013, 09:18:49 PM
Well I thought Id start off by contributing with something
12 Ultegra 3000HG      B   D   W   NO.
Main gear bearing         7   11   3   MR117ZZS
Main gear bearing         7   13   4   MR137ZZS
Pinion gear top bearing      7   14   5   MR687ZZ
Pinion gear bottom bearing      5   8   2.5   MR85ZZS
Line roller bearing         4   7   2.5   MR74ZZS

"https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21294&authkey=AHPVj-WaC8xRyE8&em=2" width="476" height="288" frameborder="0" scrolling="no" (http://"https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21294&authkey=AHPVj-WaC8xRyE8&em=2"%20width="476"%20height="288"%20frameborder="0"%20scrolling="no")

Sustain 5000FE
Main gear bearing x 2      7   13   4   MR137ZZS
Pinion gear bearing      7   14   5   MR687ZZ
Line roller bearing         5   9   3   MR95-2T
Drag spool bearing         7   11   3   MR117ZZS
Handle Bearing out      4   7   2.5    MR74ZZS
Handle Bearing in         5   8   2.5   MR85ZZS

https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21292&authkey=AN7Kik8BJ1f5MRg&em=2" width="476" height="288" frameborder="0" scrolling="no" (https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21292&authkey=AN7Kik8BJ1f5MRg&em=2"%20width="476"%20height="288"%20frameborder="0"%20scrolling="no")

Tyrnos 8II
Main Gear bearing x 2      7   17   5   MR697ZZS
Spool bearing   x 2      7   13   4   MR137ZZS

https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21293&authkey=AJPflwRi-vceF3Y&em=2" width="476" height="288" frameborder="0" scrolling="no" (https://skydrive.live.com/embed?cid=46AC7DB4F8FB2AE3&resid=46AC7DB4F8FB2AE3%21293&authkey=AJPflwRi-vceF3Y&em=2"%20width="476"%20height="288"%20frameborder="0"%20scrolling="no")

The links below each one are to the reel schematics
Title: Re: bearing sizes by reel - a running list
Post by: erikpowell on December 02, 2013, 11:49:03 PM
Diawa Team Advantage 153HSTL

handle bearing          8 x 12 x 2.5

Lt spool cap bearing   5 x 8 x 2.5

pinion bearing          8 x 12 x 3.5
Title: Re: bearing sizes by reel - a running list
Post by: MFB on December 03, 2013, 05:45:27 AM
Daiwa 900H

694ZZ
10mm x 20mm x 5mm

Regards

Mark
Title: Re: bearing sizes by reel - Abu 6501-C3 Older Model
Post by: SHAWNFISH on October 15, 2014, 12:35:10 AM
Quote from: ebnash on March 20, 2012, 03:53:32 PM
Abu 6501-C3 Older Model
                                      Qty
Spool Bearings 4 X 10 X 4       2
Pinion Bearing  8 X 13 X 4       1


im curious, by pinion bearing do you mean the bearing above the drag/drive gear before there was a IAR bearing?
Title: Re: bearing sizes by reel - a running list
Post by: Tightlines667 on January 31, 2015, 11:01:25 PM
Shimano Beastmaster 50/80

3 of 8X22X7 (TT0576)
2 of 8X6X19 (RD8128)

Also,
Bellevilles are RD8341
Title: Re: bearing sizes by reel - a running list
Post by: Unutt on February 23, 2015, 02:53:52 PM
And another

Ambassadeur ProMax / BlackMax 1600/3600

Spool (2)    3x10x4
Worm (2)    3x7x3
IAR (1)       HF1012 (10mm ID, 12mm wide)  reel foot 020002 or 020003
or
IAR (1)       HF1008 (10mm ID, 8mm wide)  reel foot 020103 or higher

Note:  HF1008 actually works great in either application.
Title: Re: bearing sizes by reel - a running list
Post by: JGB on March 10, 2015, 06:08:04 AM
Here is a compilation of just about every bearing and where used for Avet reels.
Avet sells bearing by reel model and not bearing size. So i ordered every bearing for every reel from Avet and measured and compiled this file.If there are any erros please PM me so I can updat this.

Jim N.
Title: Re: bearing sizes by reel - a running list
Post by: ReelClean on March 10, 2015, 06:14:03 AM
Bloody well done Jim :)
Title: Re: bearing sizes by reel - a running list
Post by: alantani on March 10, 2015, 06:44:43 AM
fabulous!  jim, can you repost this in the avet section.  i'll make it a sticky!
Title: 0.1875 x 0.5 x 0.1563 or 3/16 x 1/2 x 5/32
Post by: exp2000 on June 17, 2015, 11:19:59 AM
Hope this is the right place to post this.

A local tackle shop just dumped their imperial bearing inventory on me at a bargain price.

Among them was about a dozen MBA bearings: sr3-mc3-af12; dimensions: 0.1875 x 0.5 x 0.1563 = 3/16 x 1/2 x 5/32

Trouble is I cannot seem to find a match for what reel these might possibly fit !

They are not listed in Boca's inventory and I have not encountered these before.

Has anybody used these before and know what reel they might belong to?
~

Title: Re: bearing sizes by reel - a running list
Post by: Robert Janssen on June 17, 2015, 07:24:46 PM
That 0.1563 width is kinda odd.... otherwise it would've fit the Avet MXL, left spool bearing. Not all too many manufacturers use imperial bearings.
Title: Re: bearing sizes by reel - a running list
Post by: exp2000 on June 18, 2015, 06:46:51 AM
Quote from: Robert Janssen on June 17, 2015, 07:24:46 PM
That 0.1563 width is kinda odd.... otherwise it would've fit the Avet MXL, left spool bearing. Not all too many manufacturers use imperial bearings.

Yeah, was thinking the same thing myself. Had to double check it to make sure.
~
Title: Re: bearing sizes by reel - a running list
Post by: Wolli on July 31, 2015, 12:51:02 PM
Canyon Reels Bearing Dimensions and Schematics (Part 1)
Title: Re: bearing sizes by reel - a running list
Post by: Wolli on July 31, 2015, 12:52:13 PM
Canyon Reels  (Part 2) final
Title: Re: bearing sizes by reel - a running list
Post by: Wolli on August 05, 2015, 02:57:51 PM
some more
Title: Re: bearing sizes by reel - a running list
Post by: steelhead_killer on November 24, 2015, 01:09:03 AM
Who is compiling the completed list?  Will it be published?  I no one is I will volunteer... ;D
Title: Re: bearing sizes by reel - a running list
Post by: garyal on January 01, 2016, 01:02:24 AM
Avet Raptor bearing dimensions:

MXL 6/4 Raptor

P/N      Description                             Dimensions                                         Qty

07        Spool Brg.                               I.D. .1875 O.D . 3750 W. .1250          2
13        Inner Brake Brg.                      I.D. .1875 O.D. .5000 W. .1950          1
17        Outer Brake Brg.                      I.D. .1875   O.D. .3125 W. .1250        1
23        Endhouse Brg. (Pinion)             I.D. .2500   O.D. .6250 W. .1950        1
41        Drive Shaft Brg.                       I.D. .3750 O.D. 6250   W. .1550         2


SX 6/4 Raptor

P/N      Description                             Dimensions                                         Qty

07        Spool Brg.                               I.D. .1875 O.D . 3750 W. .1250          2
13        Inner Brake Brg.                      I.D. .1875 O.D. .5000 W. .1950          1
17        Outer Brake Brg.                      I.D. .1875   O.D. .3125 W. .1250        1
23        Endhouse Brg. (Pinion)             I.D. .2500   O.D. .6250 W. .1950        1
41        Drive Shaft Brg.                       I.D. .3750 O.D. 6250   W. .1550         2
Title: Re: bearing sizes by reel - a running list
Post by: garyal on January 08, 2016, 02:27:19 PM
For Accurate ATD 12 & 30 platinum the spool bearing is 8x14x4, 2 Each.
Title: Re: bearing sizes by reel - a running list - Shimano Beastmaster 20/50 2speed
Post by: steelfish on April 19, 2016, 01:46:51 AM
Quote from: erikpowell on March 26, 2013, 02:09:00 AM
Beastmaster 20/50 2 speed
(http://i1353.photobucket.com/albums/q680/fijigreen69/SANY0027_zps1081140b.jpg)

9x20x6 Rt side plate/pinion

sorry, no part #'s available... schematics don't seem to exist for this reel...if anyone knows where to find them please let me know
so I can file it away.
Thanks
Erik

thanks I needed that Pinion bearing size and dont feel like opening the reel just to take meassures

Title: Re: bearing sizes by reel - a running list
Post by: Vjtrey1 on August 06, 2016, 10:44:47 AM
Hi can i have the bearing sizes for daiwa saltist levelwind 20hc. Thank you so much!
Title: Re: bearing sizes by reel - a running list
Post by: exp2000 on January 29, 2017, 03:11:47 PM
https://www.bocabearings.com/shimano-fishing-reel-bearing-cross-reference (https://www.bocabearings.com/shimano-fishing-reel-bearing-cross-reference)

I stumbled across this list on Boca Bearing's site.

It cross references any Shimano Bearing part number to equivalent Boca replacements listing their dimensions.

So now we can easily find any bearing size for ALL Shimano reels. Great huh!
~

Title: Re: bearing sizes by reel - a running list
Post by: reelbearing on January 30, 2017, 10:16:23 AM
Quote from: Robert Janssen on June 17, 2015, 07:24:46 PM
That 0.1563 width is kinda odd.... otherwise it would've fit the Avet MXL, left spool bearing. Not all too many manufacturers use imperial bearings.

We have them on the shelf here in R3ZZ and WR3ZZ we sell quite a few next when some one orders them I'll ask what reel they need them for. Penn are the main users of imperial bearings in the UK.

Tight lines
Charlie
Title: Re: bearing sizes by reel - a running list
Post by: exp2000 on January 30, 2017, 03:15:39 PM
Quote from: reelbearing on January 30, 2017, 10:16:23 AM
Quote from: Robert Janssen on June 17, 2015, 07:24:46 PM
That 0.1563 width is kinda odd.... otherwise it would've fit the Avet MXL, left spool bearing. Not all too many manufacturers use imperial bearings.

We have them on the shelf here in R3ZZ and WR3ZZ we sell quite a few next when some one orders them I'll ask what reel they need them for. Penn are the main users of imperial bearings in the UK.

Tight lines
Charlie

Thanks. That would be appreciated.

Brett.
Title: Re: bearing sizes by reel - a running list
Post by: reelbearing on February 20, 2017, 04:08:28 PM
Hello Brett

Right they are out of a Penn 975LD I hope this helps you.

Tight lines
Charlie
Title: Re: bearing sizes by reel - a running list
Post by: exp2000 on February 20, 2017, 06:23:38 PM
Quote from: reelbearing on February 20, 2017, 04:08:28 PM
Hello Brett

Right they are out of a Penn 975LD I hope this helps you.

Tight lines
Charlie

Great! Mystery finally solved. Thanks heaps Charlie.

I rarely service this particular reel so wont be using these bearings up any time soon.
~
Title: Re: bearing sizes by reel - a running list
Post by: mhc on March 11, 2017, 09:17:36 AM
Daiwa Saltist LW20HA - LW50HA  (older silver reels with 4 bearings and one IAR bearing, not sure if these are the same as the "saltist levelwind 20 HC" that Vjtrey1 was asking about 6 months ago - probably too late to help anyway)

1 of 7.0 x 14.0 x 3.5 (6G279601 – Gear shaft bottom bearing)
2 of 8.0 x 14.0 x 4.0 (6G523403 – Gear shaft top bearing & 6G427201 – spool bearing handle side)
1 of 4.0 x 11.0 x 4.0 (6G427701 – Spool bearing non handle side)
plus one 3 x 8 x 4 nylon? bushing (6E608801) in the handle side plate under the spool tension knob - some people swap this bushing for another bearing. I'm not sure if it helps much, it probably feels smoother if you know it's there.  

Mike
Title: Re: bearing sizes by reel - a running list
Post by: ohfishalee on April 21, 2017, 05:57:38 PM
Quote from: erikpowell on June 07, 2013, 03:47:45 AM

Tiagra 50W
4 bearings, all same
shimano part # TT0033 -  8x22x7


Tiagra 50WLRSA
4 bearings, all same
shimano part # TT0576 -  8x22x7

Tiagra 80W
4 bearings all same
shimano part # TT0033 - 8x22x7

Tiagra 80WA
4 bearings all same
shimano part # TT0576 - 8x22x7

Do all of the "like numbered" bearings have the same bore for the shaft(s), i.e. they are all 8*22*7 - aren't they effectively the same bearing?
Title: Re: bearing sizes by reel - a running list
Post by: Tightlines667 on April 21, 2017, 06:45:27 PM
Quote from: ohfishalee on April 21, 2017, 05:57:38 PM
Quote from: erikpowell on June 07, 2013, 03:47:45 AM

Tiagra 50W
4 bearings, all same
shimano part # TT0033 -  8x22x7


Tiagra 50WLRSA
4 bearings, all same
shimano part # TT0576 -  8x22x7

Tiagra 80W
4 bearings all same
shimano part # TT0033 - 8x22x7

Tiagra 80WA
4 bearings all same
shimano part # TT0576 - 8x22x7

Do all of the "like numbered" bearings have the same bore for the shaft(s), i.e. they are all 8*22*7 - aren't they effectively the same bearing?

Yes.

They are the same size.  There have been several  (maybe 3?) different versions over the history of the models.  Maybe introduction of ceramic hybrid bearings, or the release of the newer version 80WA or 50WLRS models?

Just a guess.

John
Title: Re: bearing sizes by reel - a running list
Post by: ohfishalee on April 21, 2017, 07:01:45 PM
Quote from: Tightlines666 on April 21, 2017, 06:45:27 PM
Quote from: ohfishalee on April 21, 2017, 05:57:38 PM
Quote from: erikpowell on June 07, 2013, 03:47:45 AM

Tiagra 50W
4 bearings, all same
shimano part # TT0033 -  8x22x7


Tiagra 50WLRSA
4 bearings, all same
shimano part # TT0576 -  8x22x7

Tiagra 80W
4 bearings all same
shimano part # TT0033 - 8x22x7

Tiagra 80WA
4 bearings all same
shimano part # TT0576 - 8x22x7

Do all of the "like numbered" bearings have the same bore for the shaft(s), i.e. they are all 8*22*7 - aren't they effectively the same bearing?

Yes.

They are the same size.  There have been several  (maybe 3?) different versions over the history of the models.  Maybe introduction of ceramic hybrid bearings, or the release of the newer version 80WA or 50WLRS models?

Just a guess.

John

any idea of the bore size?

thinking of using angular contact bearings in a tiagra to replace TT0576
Title: Re: bearing sizes by reel - a running list
Post by: Tightlines667 on April 21, 2017, 10:22:58 PM
Quote from: ohfishalee on April 21, 2017, 07:01:45 PM
Quote from: Tightlines666 on April 21, 2017, 06:45:27 PM
Quote from: ohfishalee on April 21, 2017, 05:57:38 PM
Quote from: erikpowell on June 07, 2013, 03:47:45 AM

Tiagra 50W
4 bearings, all same
shimano part # TT0033 -  8x22x7


Tiagra 50WLRSA
4 bearings, all same
shimano part # TT0576 -  8x22x7

Tiagra 80W
4 bearings all same
shimano part # TT0033 - 8x22x7

Tiagra 80WA
4 bearings all same
shimano part # TT0576 - 8x22x7

Do all of the "like numbered" bearings have the same bore for the shaft(s), i.e. they are all 8*22*7 - aren't they effectively the same bearing?

Yes.

They are the same size.  There have been several  (maybe 3?) different versions over the history of the models.  Maybe introduction of ceramic hybrid bearings, or the release of the newer version 80WA or 50WLRS models?

Just a guess.

John

any idea of the bore size?

thinking of using angular contact bearings in a tiagra to replace TT0576

I don't have it written down, don't have any bearings in stock, or Tiagras on my bench right now.

You may have to pull a tailplate off of one of your reels and break out those calipers you bought last year?
Title: Re: bearing sizes by reel - a running list
Post by: reel man on April 21, 2017, 11:27:08 PM
Boca also cross references all Newell bearings by model.

All 200, 300, 400, 500 4.6 & 500 5.5 series use:

.375 OD
.123 ID
.156 Thick

The 540 3.2, and all 600 series use:

.375 OD
.185 ID
.125 Thick
Title: Re: bearing sizes by reel - a running list
Post by: ohfishalee on April 25, 2017, 02:15:39 AM
Quote from: Tightlines666 on April 21, 2017, 10:22:58 PM
Quote from: ohfishalee on April 21, 2017, 07:01:45 PM
Quote from: Tightlines666 on April 21, 2017, 06:45:27 PM
Quote from: ohfishalee on April 21, 2017, 05:57:38 PM
Quote from: erikpowell on June 07, 2013, 03:47:45 AM

Tiagra 50W
4 bearings, all same
shimano part # TT0033 -  8x22x7


Tiagra 50WLRSA
4 bearings, all same
shimano part # TT0576 -  8x22x7

Tiagra 80W
4 bearings all same
shimano part # TT0033 - 8x22x7

Tiagra 80WA
4 bearings all same
shimano part # TT0576 - 8x22x7

Do all of the "like numbered" bearings have the same bore for the shaft(s), i.e. they are all 8*22*7 - aren't they effectively the same bearing?

Yes.

They are the same size.  There have been several  (maybe 3?) different versions over the history of the models.  Maybe introduction of ceramic hybrid bearings, or the release of the newer version 80WA or 50WLRS models?

Just a guess.

John

any idea of the bore size?

thinking of using angular contact bearings in a tiagra to replace TT0576

I don't have it written down, don't have any bearings in stock, or Tiagras on my bench right now.

You may have to pull a tailplate off of one of your reels and break out those calipers you bought last year?


i just moved house and everything is packed away :(
Title: Re: bearing sizes by reel - Avet MXL, JX, and HX. Daiwa Saltist LD35H
Post by: steelfish on May 03, 2017, 12:41:15 AM
Quote from: ebnash on March 07, 2012, 06:14:38 AM
The following are only spool bearings...

Avet JX                   .185 X .685 X .250
                            .185 X .375 X .125

I need to change the 4 bearings on an Avet lx 2-speed
2 of the smaller ones for the spools
1 bigger one for the left side of the spool
1 pinion bearing

does anyone has the sizes to get them from Dawn in smoothdrag?
Title: Re: bearing sizes by reel - a running list
Post by: Joao Tavares on August 14, 2018, 05:37:41 AM
Shimano Tyrnos 50II 2speed LRS

     IDxODxT
1 x 10x22x6  TGT1418 Pinion bearing
1 x 08x19x6  TGT1429 Left side bearing
2 x 08x16x5  TGT0483 Spool bearings
Title: Re: bearing sizes by reel - a running list
Post by: Reel 224 on August 14, 2018, 03:57:19 PM
It would be nice if someone could compile a list of all that information you guys have furnished on a post headed Reel bearings. Just a thought.

Joe
Title: Re: bearing sizes by reel - a running list
Post by: Wolli on August 14, 2018, 08:47:25 PM
Jigging Master
Title: Re: bearing sizes by reel - a running list
Post by: Nigelr on January 12, 2020, 04:53:07 PM
Quote from: alantani on January 17, 2012, 12:22:53 AM
jimmer had a great idea of having a running list of the different sizes of bearings for all the reels.  and he's right.  if everyone chips in, this could be a real time saver for everyone.  the list will go by manufacturer (penn, shimano, etc.), then by model name (say, curado), then by model number (100D, 300E) and then by bearing location with the dimensions (left spool 4x11x4).  just post your bearing dimensions here and the moderators will add it to the list.  jimmer, thanks for the great idea!

Fin-nor Primal PR10HS

2 of 5 x 11 x 4 (115ZZ) – spool
1 of 5 x 16 x 5 (625ZZ) – spool
1 of 6 x 16 x 5 (696ZZ) – drag
1 of 8 x 16 x 5 (688ZZ) – outer handle
1 of 10 x 19 x 5 (6800ZZ) – inner handle
Anti reverse bearing is INA F-223251
Title: Re: bearing sizes by reel - a running list
Post by: shogunsc4 on February 15, 2021, 01:38:45 AM
Any chance, anyone have the bearing sizes for a saltiga ld20 2 speed?
Title: Re: bearing sizes by reel - a running list
Post by: Cor on March 21, 2021, 07:34:35 PM
SHIMANO TRANX 500 HG

BNT4429   Ball Bearing   Handle outer                4 X 9 X 4
BNT4194   Ball Bearing   Handle inner and drive shaft   5 X 9 X 3
BNT4447   Roller Clutch Bearing            
BNT4446   Ball Bearing   Right Pinion                7 X 13 X 4
BNT4479   Ball Bearing   Left pinion                       10 X 15 X 4
BNT4488   Ball Bearing   Left spool                       4 X 11 X 4
??          Ball Bearing   Right spool large            6 X 12 X 4
 
Title: Re: bearing sizes by reel - a running list
Post by: buzzawak on June 06, 2021, 12:24:37 PM
Sorry is there a formatted list or is it a case of just searching the topic ?

---
Shakespeare: Surp/Pier SP50A
PINION BALL BEARING 8 x 16 x5


Title: Re: bearing sizes by reel - a running list
Post by: dh515 on June 21, 2021, 03:06:35 AM
Shimano Speedmaster 12ii and 16ii

Left spool (1) #TGT2564 = (7X17X5)MM
Right spool (1) #TGT1583 = (7x14x5)MM

Drag plate bearing (1) #TGT 1583 = (7x14x5)MM

https://www.reelschematic.com/wp-content/uploads/schematics/Shimano/Speedmaster/Shimano%20Speedmaster%2019SM12LD2.pdf

Title: Re: bearing sizes by reel - a running list
Post by: Andygomez23 on February 15, 2023, 01:43:30 AM
Quote from: ebnash on March 20, 2012, 02:34:00 PM Avet HX Raptor - 2012 Production(Keep in mind that this may not cover your reel as I have seen other dimension for HX Raptor in earlier productions)

Left Spool – 6 X 12 X 4
Right Spool – 6 X 12 X 4
Left Pressure Plate – 6 X 19 X 6
Right pressure Plate - 6 X 12 X 4
Inner Drive Shaft - .375 X .625 X .156
Outer Drive Shaft - .375 X .625 X .156
Right Plate – 6 X 19 X 6


Has this list of bearings been updated? Looking to replace bearings on my hard.
Title: Re: bearing sizes by reel - a running list
Post by: Andygomez23 on February 16, 2023, 08:25:12 AM
Quote from: Andygomez23 on February 15, 2023, 01:43:30 AM
Quote from: ebnash on March 20, 2012, 02:34:00 PM Avet HX Raptor - 2012 Production(Keep in mind that this may not cover your reel as I have seen other dimension for HX Raptor in earlier productions)

Left Spool – 6 X 12 X 4
Right Spool – 6 X 12 X 4
Left Pressure Plate – 6 X 19 X 6
Right pressure Plate - 6 X 12 X 4
Inner Drive Shaft - .375 X .625 X .156
Outer Drive Shaft - .375 X .625 X .156
Right Plate – 6 X 19 X 6


Has this list of bearings been updated? Looking to replace bearings on my hard.

Hx raptor.. dam spell check
Title: Re: bearing sizes by reel - a running list
Post by: hotajax on November 03, 2023, 04:51:45 AM
PENN 980 Mag Power
Spool Bearings:  Handle Side 0.125" x 0.375" x 0.15"
                 Left side 0.187" x 0.500 x 0.196"

Is probably the same for Penn 970 and 990.  I know for sure there were three reels in the Mag Power Series.