Text only | Text with Images

Reel Repair by Alan Tani

Conventional and Bait Casting Reel Rebuild Tutorials and Questions => Newell Tutorials and Questions => Topic started by: circuits00 on January 11, 2014, 08:01:56 AM

Title: p220-f vs g220-f cross bars
Post by: circuits00 on January 11, 2014, 08:01:56 AM
g220-f cross bars appear to be wider(between the screw holes)than the p220-f.
Is this correct?Length seems to be the same.
Any g220-f cross bars available?
Title: Re: p220-f vs g220-f cross bars
Post by: Tunacious on January 12, 2014, 04:10:18 AM
I think I've got G220 posts so I can compare to the P220. The widths of the holes between a P and G should be the same. Perhaps the G posts are a bit wider but the ring holes would still line up if you put on a P post. Yes,the lengths will be the same.

I'll look for the posts and get back to you.
Title: Re: p220-f vs g220-f cross bars
Post by: Tunacious on January 14, 2014, 07:23:15 PM
circuits00:

Ok, I've compared the P and G posts for a 220/322. The holes line up just fine. Yes, the width of the G posts are a bit wider but that's just the way it was designed.
Title: Re: p220-f vs g220-f cross bars
Post by: alantani on January 15, 2014, 07:40:16 PM
i have some beat up cross bars.  if you could get some calipers and give me an exact lenght, i will see if anything matches. 
Text only | Text with Images