Penn International 12 Drag ?

Started by CarolinaCustomReels, August 18, 2010, 06:27:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Reel 224

Nick: I just got around to reading this post again tonight. Figure on the measurements you posted 6.00mm ID, 12.00mm OD, 1.00mm Thick?? Hight did you mean 1.5mm or 15.00mm. 

I have to have exact measurements, so I would ask you for a old spacer, as I do not have every spacer for the penn reels. Based on that figure on $1.95-$2.50ea

Joe
"I don't know the key to success,but the key to failure is trying to please everyone."

ReelFishingProblems

Joe,
That was the Belleville washers.
I will measure the spacer size needed and get back to you.
Thanks for offering to make this.

Nick

Reel 224

 ;D ;D ;D Thanks Nick, I thought I was missing something or just having a senior moment....................Joe
"I don't know the key to success,but the key to failure is trying to please everyone."