Avet Pinion Bearings

Started by Pescador, September 18, 2010, 04:54:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

skered53

#15
the other side is .1875 by .375 by .125,  standard brg is a R166  ( AVET JX )  !!

http://www.bocabearings.com/bearing-inventory/Radial-Bearings/9851/0-1875x0-3750x0-1250-SR166ZZ5

compared to the bigger brg, the load date is
R166 brg  dynamic load 72 Kgf,              basic load 28 Kgf          Avet JX small
R3    brg                     133 kgf                          50 Kgf            Avet JX and MXL large brg
R156 brg  dynamic load 37Kgf !!    basic load  15 Kgf  Avet MXL small brg

so are we seeing the little brg fail  ( brake brg ) ??



skered53

http://www.bocabearings.com/bearing-inventory/Oil-Filled-Bushings/11109/0-1875x0-3125x0-1250-B316X516F


same size bushing,  won't ever crack, but not sure how smooth that pinion will be and how quickly it might wear out ?

rod27

Sooooo skered....did u ever change the bearing?

Huckfinn

New guy here.  I dont know if this will help, but this might be something that will help with the binding.

http://www.bocabearings.com/bearing-inventory/Angular-Contact-Bearings/19872/0-2500x0-6250x0-1960-SSMDR4ZZSD501FA5P58LY48P

Looks like an angular contact bearing that is the correct size.  Little on the spendy side however.  What do you guys think, is it worth the cost for giggles?

Bryan Young

whoa, that's the cost of a single speed Avet...
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

paal

Plus I believe you need two. Left spool bearing.....

Shark Hunter

That's a lot of Dough for bearings. I am starting to think differently of getting an avet now.
Alan, You are a Master!
Life is Good!

alantani

whoa!!!!!   :o :o :o :o :o

ok, someone sent me a set a while back.  you need to get back to me, please!!!!!
send me an email at alantani@yahoo.com for questions!

Jon_Kol

#24
I also spent quite a bit of money on the bearings for my LX 6/3, but since I don't buy reels just to have them, I hope that the money spent will keep my LX 6/3 going for a long time -as i only use this reel for deep sea fishing.

Anyway, thought I'd share the info on the bearings selected by BOCA and which original bearings they replaced:

2 x SR1038C-YZZ AF2 164383 I (0.3750 x 0.6250 x 0.1562 in.)

2 x SR166C-ZZ #7 NB2 164383 I (0.1875 x 0.3750 x 0.1250 in.)

1 x SR1601C-YXX/C3 LGF 164383 I (0.1875 x 0.6875 x 0.2500 in.)

1 x SR4C-ZZ #7 LD 164383 I (0.25 x 0.625 x 0.196 in.)


The two smallest bearings replaced these two original bearings:

#17 - Brake Bearing LX6/3-017

#14- Spool Bearing LX6/3-014

The biggest bearing replaced this original bearing:

#7 - Spool Bearing LX6/3-007

The last two bearings, identical in size, replaced the last two original bearings:

#24 - Pinion Bearing LX6/3-024

#40 - Drive Shaft Bearing (2 req.) LX6/3-040


Yesterday I recieved my new Team Daiwa Z-Boat 30LB Class rod - which feels perfect with the LX 6/3, now with the new T-Bar handle installed.



SoCalAngler

Hey the handle is on the wrong side of your reel :) Do you use a harness for 30 lb test or is the bracket used to secure a lanyard when trolling?

Jon_Kol

Quote from: SoCalAngler on June 08, 2013, 04:15:25 PM
Hey the handle is on the wrong side of your reel :) Do you use a harness for 30 lb test or is the bracket used to secure a lanyard when trolling?

Haha if there's ONE thing I hear a lot, it's talk about the handle being on "the wrong side". :D I'm hopelessly lefthanded - can't use a reel with a righthand handle. That's one of the main reasons I chose Avet when I bought the reel a few years ago. Seeing people fishing for instance topwater with right handed lowprofile reels.. it just looks so wrong to me. :D

The bracket is made for the purpose of a harness, that's correct. The lower part of my back sometimes takes a beating when fishing in deep water, so I installed it a couple of years ago just in case. So far I've managed using a PENN hip-belt, hope things will stay that way..

mitchman

Quote from: alantani on June 06, 2013, 03:54:17 PM
whoa!!!!!   :o :o :o :o :o

ok, someone sent me a set a while back.  you need to get back to me, please!!!!!

Any update?

alantani

send me an email at alantani@yahoo.com for questions!

mitchman

Quote from: alantani on December 06, 2013, 04:38:07 AM
i still have them.  :-\

Alan - the bearing would would replace the pinion in the SX correct? What's your cost for one?