Okuma CD65 and CD90 Carbontex

[Porthos]

Hi Dawn!

I saw in 2013 you made Lumberjack93 sets of carbontex for the Okuma CD65 and CD90 Baitfeeders. Would you still happen to have those dimensions? If so, how much for the sets?

Here's the post to jog your memory:
http://alantani.com/index.php?topic=7857.0

Thanks!

[Rancanfish]

When I get mine (different size) Friday the first thing I'm going to do is check what CF drags will fit.  It will be the first spinner I've ever worked on.

[Porthos]

When I get mine (different size) Friday the first thing I'm going to do is check what CF drags will fit.  It will be the first spinner I've ever worked on.

I had no choice but to work on the CD65 after it got dunked in the surf and sand at Solmar Beach in Cabo--a wave slammed and knocked me over while standing above the visible hightide mark. Taught me to appreciate a hurricane's (Marie) energy even though it was 200+ miles offshore.

[Dawn]

Hi
Yes I do.  $9.00 for the set of 3.

Dawn
888-206-4656

[Porthos]

Hi
Yes I do.  $9.00 for the set of 3.

Dawn
888-206-4656

Thanks Dawn for your response, but I need clarification on "...set of 3." Do you mean five? That's what I'm seeing in: http://alantani.com/index.php?topic=7857.0

[Porthos]

Thanks Dawn. Got the washers yesterday. The I.D. was spot on, but the O.D. needed adjustment--that's the Dremel is for.

Okuma must have had different production runs on the spools with different sized washers.