alan tani @ alantani.com fishing reel repair rebuild tutorial bearing size
Reel Repair by Alan Tani
November 21, 2018, 12:42:55 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: bearing size  (Read 3860 times)
0 Members and 2 Guests are viewing this topic.
maxpowers
Member
*
Offline Offline

Posts: 482


« on: February 25, 2017, 09:42:27 PM »

could someone give me the dimension of the smaller bearing on the handle side for the SG reel?  I bought a used reel and the bearing is shredded.
Logged
maxpowers
Member
*
Offline Offline

Posts: 482


« Reply #1 on: February 26, 2017, 09:09:04 AM »

never mind i got the outer bearing race out.  It is 8x13x4.
Logged
GonefishinLI
Member
*
Offline Offline

Posts: 2


« Reply #2 on: January 25, 2018, 02:45:30 PM »

Is that something these reels are prone to? I had two of these that had damaged this bearing. (Iíll admit I didnt grease the bearings but I clean my stuff pretty well and tbh I didnít use one of these much)

Ps - first time posting here so thanks for all the awesome boards, tips and techniques.
Logged
Bryan Young
Ultimate Upgrades Drags
Administrator
Member
*****
Online Online

Posts: 9793


The Reel Whisperer


« Reply #3 on: January 25, 2018, 03:42:22 PM »

The pinion bearing?

If so, itís likely you are fishing the reel above itís design limits
Logged

Cheesy I talk with every part I send out and each reel I repair so that they perform at the top of their game. Cheesy
GonefishinLI
Member
*
Offline Offline

Posts: 2


« Reply #4 on: January 25, 2018, 04:35:31 PM »

Hey Bryan, I was actually referring to the small bearing on the handle side
Logged
Tiddlerbasher
Photo Group
Member
**
Online Online

Posts: 2342



« Reply #5 on: January 26, 2018, 05:26:08 AM »

The handle side bearing will be prone to corrosion if not greased properly.
Logged
Jon_Kol
Member
*
Offline Offline

Posts: 220



« Reply #6 on: August 10, 2018, 12:19:27 AM »

Older topic, but here's the info I was sent when asking about the bearing sizes:

Here is the list of bearings your requested.

Spool inboard bearing (SG and LG)  5ID x 11OD x 5mm thick
Spool outboard bearing (SG and LG) 5 x 14 x 5

Thrust plate bearing (SG and LG) 5 x 11 x 3

pinion bearing (SG and LG)  7 X 19 X 5

shaft inboard bearing (SG and LG) 12 x 21 x 5 (also shaft outboard bearing for LG)
Shaft outboard bearing SG 8 x 13 x 4

Anti reverse bearings would probably need to be purchased from us to ensure a proper fit.

There are 3 different sizes of SG anti-reverse bearings because we upgraded them over the past few years.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.249 seconds with 16 queries.