Shimano Tekota 300LC anti reverse roller bearing stuck!

Started by Justinskywest, March 21, 2017, 05:32:08 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Justinskywest

I'm doing a customer reel and I need to replace the rusted ARRB but I can't get it to budge from the sideplate. Any recommendations for getting that bad boy out of there? maybe a bearing puller or something of that nature. Ive got the bearings removed but there's no reveal on the sideplate to do the 10mm socket trick to pop it out. HELP!!!

Bryan Young

I believe those I place a larger socket on the inside of the empty sideplate and then a 10 mm socket on the outside of the side plate the put it in a vice and crank slowly pushing out the bearing into the socket on the inside side plate.
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

ReelClean

Specialist Daiwa reel service, including Magseal.

Justinskywest

So I ended up taking a dremel and cutting it out. The 10mm socket only works to tap this one in, not out. I'm all but finished getting it buttoned up now. Thanks guys

Justin