Penn fathom 40 II help

[Sluggo]

I took my fathom apart and did not see where a washer/spacer came from don't even see it on the schematics I suspect it goes between the bearing and spring ?

[Sluggo]

Does Anybody know where it goes ?

[alantani]

i don't have a fathom to check against. anybody else?   

[basto]

I suspect your guess that it goes between the bearing and spring is correct. There is usually a washer between the inner race of a bearing and another part.
Just my guess.
Basto

[Keta]

Possibly between the spool and the bearing.

[Penn]

It goes under the ball bearing inside the spool.  It's one of those "use as needed" shims.  It made it to the Torque LD schematic not sure why it didn't on the Fathom.  For reference part # 8A

http://s7d5.scene7.com/is/content/purefishing/407-TRQ40NLD2

tony

[reel man]

Good research Tony. Well done!

[Bryan Young]

AT Ohana, you know we are very lucky to have Tony here.

Thank you Tony.

[coastal_dan]

Agreed, its like an 'insider'...shhh...don't tell. 

[Sluggo]

Thank you all so much !  going to put it back together, get another coat of epoxy on the UC predator blank I bought at Fred hall and mate them up. just in time for shoulder surgery