alan tani @ alantani.com fishing reel repair rebuild tutorial 1911 pistols
Reel Repair by Alan Tani
September 24, 2018, 04:03:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 1911 pistols  (Read 30488 times)
0 Members and 1 Guest are viewing this topic.
mikeysm
Member
*
Offline Offline

Posts: 878


« on: April 02, 2017, 11:20:31 AM »

Is there anyone on this forum good with 1911's. IM building a 80% 1911 and have questions. It's complete except for a few tweeks. Also I need to do the coating but not until I get it complete and shooting.
« Last Edit: April 07, 2017, 07:24:44 AM by mikeysm » Logged
MrDirt
Member
*
Offline Offline

Posts: 1


« Reply #1 on: July 21, 2017, 04:42:34 PM »

Just joined this for some reel information, but I saw the firearms section and I'm a gunsmith. So what questions do you have?
Logged
mikeysm
Member
*
Offline Offline

Posts: 878


« Reply #2 on: July 25, 2017, 03:26:19 PM »

I'm trying to set the trigger pull. I converted it from a 80 series to a 70. Everthing is polished and adjusted. The sear spring is the last thing on my list. I am self taught since most people just shoot their gun and never work on it. Hard to find someone who knows 1911s.


* 20170513_104910.jpg (417.38 KB, 1280x720 - viewed 146 times.)
« Last Edit: July 25, 2017, 03:40:02 PM by mikeysm » Logged
Rivverrat
Member
*
Online Online

Posts: 1633



« Reply #3 on: March 30, 2018, 07:19:28 PM »

 Just noticed this is an old thread. I'll leave my reply for any others with same question.

I  have zero interest of going into any detail on the internet about guns. Listed below are two very basic things you should have for what your doing. While I disagree with Jerry K. on some of his methods he will not steer you wrong.

The trigger & sear jig is a must have. The Marvel model is affordable & does a good job. I dont like it as much as Ron Powers version.

Since you've changed to a 70 series it is of the utmost importance that the relationship between the hammer & sear be set properly. Even more so if you are planning to carry it in condition one. Failure on your part to do this makes this gun unsafe to you & any one around you while firing it. Good Luck... Jeff


* 199119.jpg (72.08 KB, 880x660 - viewed 90 times.)

* p_080823000_1.jpg (22.48 KB, 400x400 - viewed 208 times.)
« Last Edit: August 15, 2018, 04:46:42 PM by Rivverrat » Logged
mikeysm
Member
*
Offline Offline

Posts: 878


« Reply #4 on: April 01, 2018, 02:19:08 AM »

I don't need that tool. The difference is I bought very high quality parts. I have no problems in that department.

Mike
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.183 seconds with 18 queries.