Jigmaster Build

[Alto Mare]

If you were making those, I'm in Adam, but not if it's too much hassle on you.

We need stainless steel handle screws as well, I wonder who could help with those. Maybe even with 3 or 4 additional thread on it, so we could use thicker arms with no issues.

[Three se7ens]

https://www.mcmaster.com/#92196a124/=178sy7q  That is the #5-40 to fit the original arms, but a little longer.

I use #4-40 in my arms, which is more readily available.  Ill be happy to offer spares for mine upon request, and I have screws with turned down heads in case the lock screw location is a little too close to the handle nut.

[RowdyW]

Adam, I think Sal means the screw that goes into the end of the gear sleeve to bolt the handle to the reel.                     Rudy

[Three se7ens]

Adam, I think Sal means the screw that goes into the end of the gear sleeve to bolt the handle to the reel.                     Rudy

You are correct, I misread it the first time.

edit:  I need to double check the thread sizes to see if standard bolts are available.