alan tani @ alantani.com fishing reel repair rebuild tutorial Belleville washer configuration change between 4/0-2 and EXW30?
Reel Repair by Alan Tani
November 19, 2017, 04:16:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Belleville washer configuration change between 4/0-2 and EXW30?  (Read 1561 times)
0 Members and 1 Guest are viewing this topic.
mitchman
Member
*
Offline Offline

Posts: 52


« on: April 26, 2017, 05:37:38 AM »

So I was rebuilding my older EXW30 and EX50 with the old style handles and was using the rebuilds for the 4/0-2 and 5/0-2 here while also using the Avet schematics and found a discrepancy in the belleville washer configuration! I'm not sure if its a difference between the 4/0-5/0 and EX/EXW series or an error in the schematics. Anyways, on the older 4/0 and 5/0 have the belleville washers riding the spool shaft between the pinion gear and spool bearing while the new schematics show the belleville washers on the outside of the pinion gear between it and the pinion bearing. Can anyone confirm that this is in fact correct?
Logged
Keta
D'oh!
Moderator
Member
****
Online Online

Posts: 7087


Klamath Falls, OR US


« Reply #1 on: April 26, 2017, 06:26:37 AM »

That is right for the EX40 and a minor PIA to get them in place.
Logged

In the morning when I wake up I will see what tomorrow will bring.
Hi, my name is Lee and I have a fishing gear problem.
A man who carries a cat by the tail learns something he can learn in no other way.
Mark Twain
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.15 seconds with 16 queries.