alan tani @ alantani.com fishing reel repair rebuild tutorial Common parts to keep on hand?
Reel Repair by Alan Tani
November 19, 2017, 04:05:50 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Common parts to keep on hand?  (Read 1143 times)
0 Members and 1 Guest are viewing this topic.
Rickb
Member
*
Offline Offline

Posts: 80


Oklahoma Leviathan catcher! Lol


« on: May 19, 2017, 11:15:01 AM »

Hi, Grin
   I have just started collecting penn reels and have 4/0s,6/0 114h and 9/0s
plan on getting more penn reels
Wondered what parts normally need replaced,or what parts you like to keep on hand?
   So far..  I grabbed some random parts off eBay :)got them today.
    Going to place an order with scotts for drag sets,and thought I may as well add a few
other things
    Should I get gears,extra screws,springs,any ideas?
What are the most common screws? And do you buy in bulk packs? I plan on replacing all the chewed up looking ones.
I imagine I will have lots more questions Grin
  Thanks
Logged
foakes
Moderator
Member
****
Offline Offline

Posts: 4196


Sierra National Forest


« Reply #1 on: May 19, 2017, 11:45:04 AM »

If starting from scratch -- knowing what I know about the quality of Penns -- and the most replaced items:

Drags -- HT100, SS discs, plus dog springs, eccentric springs, bearings for left and right, spring tension drag washers for top of stack.

McMaster-Carr for SS screws --  buy in packs of 100 -- various sizes and thread pitches -- as deemed for your reels.  Plus handle lock screws.

Smooth Drag for Delrin Under gear washers, and sometimes top of stack smoothness.

Actually, that is about it -- everything else you run into will be on a case by case basis -- really shouldn't stock every possibility if rarely used.

Parts can be ordered and received in just a few days.

IMO.

Best,

Fred

Plus, If you were doing a lot of 209's and 500's -- just buy a half dozen or so of each from Wal-Mart to strip down for the parts bins.  At about $60 - $65 each -- free shipping, all parts fit, no brainer -- and plenty of parts left over.

Best,

Fred



Logged

"If we are going to jay-walk across Life's highway -- we should find  a road with slow traffic."



"At the Office"
Rickb
Member
*
Offline Offline

Posts: 80


Oklahoma Leviathan catcher! Lol


« Reply #2 on: May 21, 2017, 07:06:12 AM »

  THank you for the reply Fred!
   
 any idea on some of the screw sizes? if I knew I will get a machine  screw tap and die set it should have the pitch gauge in it
  And can order the most common screws and if necessary cut to size
  I used to have all sorts of tools but when I got down and we down sized and moved to smaller place when I was so weak and shakey couldn't use simple tools for a few years I gave a lot of things away....docs were wrong about me cause I am still kicking Grin
     now  I am doing mostly ok and need to rebuy a few things LOL I sure have been noticing that prices went way up and quality of many tools is lacking!
 
Thanks Rick
If starting from scratch -- knowing what I know about the quality of Penns -- and the most replaced items:

Drags -- HT100, SS discs, plus dog springs, eccentric springs, bearings for left and right, spring tension drag washers for top of stack.

McMaster-Carr for SS screws --  buy in packs of 100 -- various sizes and thread pitches -- as deemed for your reels.  Plus handle lock screws.

Smooth Drag for Delrin Under gear washers, and sometimes top of stack smoothness.

Actually, that is about it -- everything else you run into will be on a case by case basis -- really shouldn't stock every possibility if rarely used.

Parts can be ordered and received in just a few days.

IMO.

Best,

Fred

Plus, If you were doing a lot of 209's and 500's -- just buy a half dozen or so of each from Wal-Mart to strip down for the parts bins.  At about $60 - $65 each -- free shipping, all parts fit, no brainer -- and plenty of parts left over.

Best,

Fred




Logged
foakes
Moderator
Member
****
Offline Offline

Posts: 4196


Sierra National Forest


« Reply #3 on: May 21, 2017, 07:28:05 AM »

Rick --

There are better experts on site than me -- when it comes to screw sizes.

Never thought too much about it, since there are plenty in the parts bins to match up.

Scott's, Sal, and other folks on our site will have this information.

One thing, maybe ease back a bit on the screws until you really determine your needs.  Then of 100 packs make sense to you, great -- if not buy what you need -- or split the cost with a few members.

Best,

Fred


* IMG_0181.JPG (3006.86 KB, 3264x2448 - viewed 46 times.)
« Last Edit: May 21, 2017, 07:30:02 AM by foakes » Logged

"If we are going to jay-walk across Life's highway -- we should find  a road with slow traffic."



"At the Office"
STRIPER LOU
Sensei
Member
***
Online Online

Posts: 1374



« Reply #4 on: May 21, 2017, 07:41:13 AM »

Rick, the screws I use the most are 5-40 (for side plates) . I usually purchase fillister hd or flat hd from Mcmaster  in 5-40 x 1/2, 5/8, and 3/4" lengths. The longer ones can be cut down for any custom work.

 Allen, fillister, and  flat head can be  had from mickeymaster at reasonable prices. For oval head screws I buy flat hds, put a bit of tape around them and chuck them in a drill or drill press and dome them up with a file and give them a quick polish with emery. They work out great and end up costing about a nickel apiece.

Enjoy your new hobby,  ..  Lou
« Last Edit: May 21, 2017, 07:43:13 AM by STRIPER LOU » Logged
Rickb
Member
*
Offline Offline

Posts: 80


Oklahoma Leviathan catcher! Lol


« Reply #5 on: May 23, 2017, 03:37:45 PM »

Fred,
   I ordered drag sets and a variety of things for reels I have  from pennpartscotts yesterday including some common screws,and springs for reels I don't have just to have on hand .And a few parts  off eBay (i need to fill a few parts bins) Grin
Lou,
  I will order some boxes of the 5-40 ,to have handy for when I need to make certain size or need or want it quick.   I have had to modify things in the past when I couldn't find what I needed and It beats driving 50 or more miles for a little thing
   Thanks
   Rick
Logged
foakes
Moderator
Member
****
Offline Offline

Posts: 4196


Sierra National Forest


« Reply #6 on: May 23, 2017, 05:37:36 PM »

Sounds like you are doing it right, Rick --

Best,

Fred
Logged

"If we are going to jay-walk across Life's highway -- we should find  a road with slow traffic."



"At the Office"
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.52 seconds with 18 queries.