alan tani @ fishing reel repair rebuild tutorial Fin-nor Lethal LTL20 - Drag Plate Assembly
Reel Repair by Alan Tani
March 17, 2018, 06:44:18 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]   Go Down
Author Topic: Fin-nor Lethal LTL20 - Drag Plate Assembly  (Read 5438 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 1

« on: May 30, 2017, 01:40:56 PM »

Took apart my new LTL 20 to fully grease everything.  Good thing since the gears had no grease on them.  Not sure if this is normal from the factory or and oversight.  When removing the drag plate assembly there is a plastic arm on the underside of the plate that I did not notice until I removed it.  Now I'm not sure the position the arm needs to be in for reassembly.  I can't tell what function the plastic arm has so I'm not sure which of 2 possible positions is the correct one.  I believe it may have something to do with the anti-reverse pawl, but I'm not sure.  I've reassembled with the plastic arm in both positions and everything seems to function properly in both cases.

Anybody know what the plastic arm assembly is for and more importantly what the correct position is?  Thanks for any help.
Offline Offline

Posts: 5

Fishing reel engineer from China.

« Reply #1 on: June 17, 2017, 06:16:29 AM »

 Smiley as i know, the plastic arm that you removed---it's function was only to keep the Anti-reverse pawl silence. i will show you the correct position later.
Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.107 seconds with 15 queries.