Carbontex question

Started by jcarlson, October 05, 2017, 01:00:58 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jcarlson

               I have recently purchased a Millionaire cv-z 253, US, plus I have also purchased a Millionaire SW 203, Japanese model. I ordered new bearings and drag washers for both. The question is do I need to grease the drag washers or let them run dry? Planning on a complete teardown of both when received.

Ron Jones

I am an Alan Tani disciple, and therefore the mantra is "Cal's grease on CF drag washers." It is the #1 upgrade you can do to just about any reel unless it comes with greased CF washers.
Ron

By the Way; Welcome to the forum.
Ronald Jones
To those who have gone to sea and returned and to those who have gone to sea and will never return
"

Bryan Young

Quote from: Ron "Jones on October 05, 2017, 01:25:36 AM
I am an Alan Tani disciple, and therefore the mantra is "Cal's grease on CF drag washers." It is the #1 upgrade you can do to just about any reel unless it comes with greased CF washers.
Ron

By the Way; Welcome to the forum.
👍👍👍
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Tiddlerbasher

x3 particularly in the salt - you'll get a much smoother drag and salt water can't get in :)

jcarlson

Thank you for the help gentlemen

happyhooker

Welcome to the site, from Minnesota.

Frank