Spools for the Newell 220

Started by fishhead69, November 11, 2017, 04:03:21 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

fishhead69

Will an aluminum spool from a Newell 220 "Blackie" fit a Newell C, G or S series Newell 220 reel?

Bryan Young

:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Swami805

It should fit, I've used blackie 322 spools in other 322's, worked fine.
Do what you can with that you have where you are

Yogi_fish808

When swapping aluminum or graphite spools between different reels occasionally you'll find the spool lip rubs the inner rings. Usually it's fine but occasionally you either need to swap different rings in till you find a set that clears or slowly shave down the inner radius with a dremel carbide bit. Also the shims required to center spools will vary when switching spools out so have a variety of different thickness shims ready.

fishhead69

Thanks for all the good info. You guys are awesome.

TEAMFISH

FYI, Tiburon is making aluminum spools for the 220's. All colors in stock. They're not on the website yet but they do have them. I believe they are $ 55.00 ea.