Adjustable Mag Kits - Updated 3/28/18

[fishhawk]

PM your addy and I will get it out tomorrow.
Mark

Sorry John, I thought you needed a side plate.  people Thorhammer still needs a 145 spool!

[thorhammer]

NP,  brother. I see some aluminum on the bay so they are out there. I have a few 140 Squidders not on rods waiting for some love. I have a Newell kit from Randy that I can switch over from the 150.

[xjchad]

I added a PDF attachment of the installation instructions today.
(Updated file attached)

[sdlehr]

Chad is a busy guy, so I'll help him out. The size "I" drill needed for the 5/16-24 tap is 0.272", not 0.292". He was completely right, size "I" will get you what you need, he was just off by 0.02" on the measurement. 7's can look like 9's.

Sid

[xjchad]

Chad is a busy guy, so I'll help him out. The size "I" drill needed for the 5/16-24 tap is 0.272", not 0.292". He was completely right, size "I" will get you what you need, he was just off by 0.02" on the measurement. 7's can look like 9's.

Sid

Thank you Sid!
I updated the instructions.  Thanks for catching that for me!