Spheros SW 6000

Started by Scattergun2570, January 21, 2018, 03:07:52 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Scattergun2570

I tried the search function,but nothing came up for a tutorial on this reel.. Anyone know of one? YouTube didn't yield much either.

MarkT

You might look for a Saragosa video. There's little difference between them.
When I was your age Pluto was a planet!

exp2000



exp2000

#4
Quote from: Scattergun2570 on January 21, 2018, 04:09:12 AM
Quote from: exp2000 on January 21, 2018, 03:44:35 AM
http://www.alanhawk.com/reviews/spsw.html

~

Looking for a service tutorial,not review.

Did you actually follow the link? Complete breakdown and disassembly.

If you know how to apply oil and grease, your there.

Gettin pretty frustrated today for some strange reason !

~

Scattergun2570

Quote from: exp2000 on January 21, 2018, 04:13:06 AM
Quote from: Scattergun2570 on January 21, 2018, 04:09:12 AM
Quote from: exp2000 on January 21, 2018, 03:44:35 AM
http://www.alanhawk.com/reviews/spsw.html

~

Looking for a service tutorial,not review.

Did you actually follow the link? Complete breakdown and disassembly.

If you know how to apply oil and grease, your there.



Gettin pretty frustrated today for some strange reason !

~

Frustrated? Maybe you need more sleep.

alantani

they're very tough to work on.  if you can't find on on a search of youtube or here, then it's likely you will not find one.   :-\
send me an email at alantani@yahoo.com for questions!

handi2

As stated the Saragosa tutorial will almost the same thing. They are actually very simple. Take the handle off first.

Start up top taking the rotor off. Then the roller clutch. Pull out the pinion gear and its bearing.

Now take out the body screws and remove the cover. On the end of the body is a gold piece. Pull it off and then remove the spool shaft and oscillating slidder as one piece. Turn that part over and tighten the screw that attaches the 2 parts. Its always loose.

The rest is self explanatory.

Put it back together the same way by doing the body of the reel first. It will be together with all gears and parts.



OCD Reel Service & Repair
Gulf Breeze, FL

Scattergun2570

Quote from: handi2 on January 21, 2018, 11:40:04 PM
As stated the Saragosa tutorial will almost the same thing. They are actually very simple. Take the handle off first.

Start up top taking the rotor off. Then the roller clutch. Pull out the pinion gear and its bearing.

Now take out the body screws and remove the cover. On the end of the body is a gold piece. Pull it off and then remove the spool shaft and oscillating slidder as one piece. Turn that part over and tighten the screw that attaches the 2 parts. Its always loose.

The rest is self explanatory.

Put it back together the same way by doing the body of the reel first. It will be together with all gears and parts.


Thanks Keith