Tatula SV knob bearings

Started by fritz1, March 14, 2018, 07:22:40 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

fritz1

Hi guys,

i wanted to install two second knob bearings on my tatula sv, there seems to be no changeable bushing though. Is it missing or is it pressed in tightly?

THX

ps: this is a serious question, thx in advance!

fritz1


handi2

If there are bushings in the knob you have to push them out with something, measure them, then get the bearings. If you replace the bottom bushing with a bearing it will rust quickly. The one closest to the handle blade.
OCD Reel Service & Repair
Gulf Breeze, FL

fritz1

#3
Thank u very much, ill keep an eye on that.

ps: the bushing is pressed in tightly, fixed it! THX