alan tani @ alantani.com fishing reel repair rebuild tutorial First Look at the Tiburon 20/0 Senator Frames: A Work in Process
Reel Repair by Alan Tani
October 21, 2018, 03:04:16 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 2 [3]   Go Down
  Print  
Author Topic: First Look at the Tiburon 20/0 Senator Frames: A Work in Process  (Read 1664 times)
0 Members and 2 Guests are viewing this topic.
Fishy247
Member
*
Online Online

Posts: 349



« Reply #30 on: June 12, 2018, 01:48:40 PM »

I'm looking forward to seeing how much line these bad boys can hold!
Logged
mikeysm
Member
*
Online Online

Posts: 888


« Reply #31 on: June 12, 2018, 06:22:06 PM »

I am pricing out a 1000 ft of 200lbs of JB hollow braid from Lee. I will top it off with 150lbs of mono.


Mike
Logged
54bullseye
Member
*
Online Online

Posts: 432


« Reply #32 on: June 13, 2018, 01:16:19 AM »

I am pricing out a 1000 ft of 200lbs of JB hollow braid from Lee. I will top it off with 150lbs of mono.


Mike
If you put 1000 ft of JB hollow braid on it first then top it with 150 mono you better get one big spool of mono !!!  And say good by to the JB hollow cause you will probably never see it again !!  Lol !!!
Logged
mikeysm
Member
*
Online Online

Posts: 888


« Reply #33 on: June 13, 2018, 02:23:35 AM »

Oops my mistake I ment a 1000yds of JB.

Mike
Logged
Benni3
Member
*
Online Online

Posts: 1429



« Reply #34 on: June 13, 2018, 08:30:02 AM »

I did find 200lb and 300lb mono for $220 but it's enough to do 3 or 4 reels Grin
« Last Edit: June 13, 2018, 08:31:36 AM by Benni3 » Logged
1badf350
Member
*
Online Online

Posts: 412


-Chris


« Reply #35 on: June 13, 2018, 09:38:41 AM »

Im going with 8 miles of 6lb Red Cajun.
Logged

-Chris
thorhammer
Member
*
Online Online

Posts: 3483


"You can't drank all day if you don't start..."


« Reply #36 on: June 13, 2018, 11:07:03 AM »

I bet it will seriously hold a mile of 130, or close...a 16/0 will hold 11-1200 yds.

Chris, I think you will need 12k yd spool of Cajun Smiley
Logged
Fishy247
Member
*
Online Online

Posts: 349



« Reply #37 on: June 13, 2018, 01:54:45 PM »

Quote
Im going with 8 miles of 6lb Red Cajun.

That's monofilament, right? I'll bet you get get more on if it was 6# Spectra....
Logged
conchydong
Member
*
Online Online

Posts: 1172


Pompano Beach, FL


« Reply #38 on: June 13, 2018, 03:07:59 PM »

I didn't get one because I would have no practical use for it by I agree with some of the members with backing it with good old fashioned Dacron. Easy to splice heavy mono into it, less costly than spectra and will fill the spool easier.. JMO
Logged
Shark Hunter
Moderator
Member
****
Online Online

Posts: 10557


The Rogue of the Seven Seas!


« Reply #39 on: June 13, 2018, 03:53:46 PM »

I'm thinking this spool is going to have a large arbor.
It should be about the size of a 18/0 Everol spool.
The specs on that spool show it holds 1500 Yards of 200lb mono. Not True.
It holds more like 900. That is 1.5mm Diameter.
If you spool it with 130. The capacity is going to be the same as stock due to the large arbor of the spool.
With the full frame and beefed up spool, it is going to be a much stronger reel.


* IMG_3083.JPG (2071.6 KB, 2272x1704 - viewed 31 times.)

* IMG_3896.JPG (1597.38 KB, 2272x1704 - viewed 29 times.)

* IMG_3054_zpst6w6tbid.jpg (272.4 KB, 1024x768 - viewed 29 times.)
« Last Edit: June 13, 2018, 04:05:47 PM by Shark Hunter » Logged

Life is Good!
conchydong
Member
*
Online Online

Posts: 1172


Pompano Beach, FL


« Reply #40 on: June 13, 2018, 04:23:54 PM »

Daron, Everol's specs may be based on the Italian "Asso" mono fishing line which is marketed in the US as "Soft Steel". It has a lower diameter for it's listed breaking strength but probably not quite as much of a difference as you are stating.
 Someone should be the "Guinea pig" and go first spooling the reel and then the others will have a better guesstimate on how they will spool theirs.
Logged
1badf350
Member
*
Online Online

Posts: 412


-Chris


« Reply #41 on: June 13, 2018, 04:40:23 PM »

Quote
Im going with 8 miles of 6lb Red Cajun.

That's monofilament, right? I'll bet you get get more on if it was 6# Spectra....
But its Red Cajun man!
Logged

-Chris
Benni3
Member
*
Online Online

Posts: 1429



« Reply #42 on: June 14, 2018, 07:26:36 PM »

I'm thinking this spool is going to have a large arbor.
It should be about the size of a 18/0 Everol spool.
The specs on that spool show it holds 1500 Yards of 200lb mono. Not True.
It holds more like 900. That is 1.5mm Diameter.
If you spool it with 130. The capacity is going to be the same as stock due to the large arbor of the spool.
With the full frame and beefed up spool, it is going to be a much stronger reel.
thanks for the info Cheesy 20/0 Everol specs was 1000yds of 300lb,,,,this is a game changer,,,,,but for the good "stronger"  Grin
Logged
Shark Hunter
Moderator
Member
****
Online Online

Posts: 10557


The Rogue of the Seven Seas!


« Reply #43 on: June 15, 2018, 12:43:50 AM »

The 20/0 Everol is a Bigger reel. The Side Plate Diameter is much Larger.
Imagine a Gallon of Paint with a Handle on it. Wink
18/0 is the same width.
Logged

Life is Good!
The Great Maudu
Member
*
Offline Offline

Posts: 478


I'd rather be hearing the clickers scream


« Reply #44 on: June 15, 2018, 10:46:39 AM »

Shark Hunter, that pic of the two Godfathers is one of the all time classics.
Logged
Pages: 1 2 [3]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.269 seconds with 17 queries.