alan tani @ alantani.com fishing reel repair rebuild tutorial Lexa 300 hd help
Reel Repair by Alan Tani
October 21, 2018, 02:21:00 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Lexa 300 hd help  (Read 254 times)
0 Members and 1 Guest are viewing this topic.
Realfunone
Member
*
Offline Offline

Posts: 2


« on: June 13, 2018, 05:27:45 PM »

As I reassembled the reel. I spotted stuck to the greased side plate a VERY small flat washer.  The might be the smallest washer I've ever seen. Maybe they call this a spacer. Idk. It is so fine it looks like stripped thread pulled off a 3/16 hole . Small and thin. This is not lock washer. It is flat . Where does this washer go. The schematic isn't clear on what or where this goes. Any help would be great. This is my first reel using the grease bearing packer. Very frustrating little  Pia. This is the second time I have taken apart. I did not take the level winder apart. So it's not that small spacer. Washer in question is smaller. Or from the picture it looks smaller.
Thanks guys
« Last Edit: June 13, 2018, 06:24:42 PM by Realfunone » Logged
Swami805
Member
*
Online Online

Posts: 2042


« Reply #1 on: June 13, 2018, 09:24:11 PM »

From your description it sounds like a shim not a washer. Could it have come from under a bearing in one of the bearing cups or something? never opened a lexa, Just a guess
Logged
Realfunone
Member
*
Offline Offline

Posts: 2


« Reply #2 on: June 14, 2018, 07:15:38 PM »

Swami you were right . It was a shim behind the cast control knob. I'm not sure how it was stuck in the grease on the Side plate, but hey I got it. It feels like butter now. Thanks for the help.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.177 seconds with 18 queries.