alan tani @ alantani.com fishing reel repair rebuild tutorial Penn Drag Kit 6-113SP
Reel Repair by Alan Tani
September 24, 2018, 03:46:00 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Penn Drag Kit 6-113SP  (Read 942 times)
0 Members and 1 Guest are viewing this topic.
alantani
admin
Administrator
Member
*****
Online Online

Posts: 16144



« Reply #15 on: July 02, 2018, 07:30:10 PM »

so the reel is a black side plate 113, correct?  that would take five of the 6-60 ht-100 drag washers inside the main gear.  it's a tight fit, but you only need to get the last slotted washer to nest inside the main gear and it will work. 
Logged

send me an email at alantani@yahoo.com for questions!
nelz
Member
*
Offline Offline

Posts: 529



« Reply #16 on: July 02, 2018, 09:56:49 PM »

Thanks Alan. It's a black side plate 113H if that makes any difference.
Logged
RowdyW
Firearms Group
Member
**
Online Online

Posts: 1929



« Reply #17 on: July 02, 2018, 10:20:50 PM »

If it has black side plates it is a 113 4/0. If it has red or maroon side plates it is a 113H. They are two different models & most of the parts don't interchange. The 6-113SP will not fit into a 113 4/0. You have to either put 6-113 CF (3) drags in it or 6-60 (5) Cf washers in it. If you want to go for the thinner 6-60 CF washers you will also have to get 1 more earred & 1 more keyed washer to make the 5 stack complete. The 5 stack will increase the drag pressure more then the 3 stack. Look up the parts in the Senator 113 4/0 section not the 113h SPECIAL Senator section.        Rudy
Logged
nelz
Member
*
Offline Offline

Posts: 529



« Reply #18 on: July 03, 2018, 04:56:50 AM »

Rudy, mine is black and actually says "113H" on the plate.  Did I get lucky and acquire a rare specimen?

Also, it's a 3.25 to 1 ratio with steel gears (dull finish, not the shiny stainless ones).
« Last Edit: July 03, 2018, 05:00:35 AM by nelz » Logged
nelz
Member
*
Offline Offline

Posts: 529



« Reply #19 on: July 03, 2018, 05:17:59 AM »

Rudy, mine is black and actually says "113H" on the plate.  Did I get lucky and acquire a rare specimen?

"STOP THE PRESSES!"

After my last post I was left wondering, hmm... so I shone a bright flashlight on the sideplates and sure enough, they are NOT black after all. As it turns out they are actually a very deep dark maroon color. I guess they darkened like that from weathering perhaps? Anyway, now things are starting to make more sense.
« Last Edit: July 03, 2018, 05:19:30 AM by nelz » Logged
mizmo67
MysticParts.com Sales/Tech
Webmaster
Member
****
Online Online

Posts: 1115


Mystic Island, NJ


WWW
« Reply #20 on: July 03, 2018, 06:28:44 AM »

That means you would use the 6-113HSP kit, different diameter gearing.

Some of the old 113-H reels are really dark..but I have actually seen one that was black. Once.
Logged

~Mo

Maureen Albertson Smiley
Scott's Bait & Tackle / Mystic Reel Parts (Formerly PennParts.com)
Contact Me Via Store Website Please!
Orders/Support# +1 (609) 488-4637 (parts ordering or troubleshooting)
Skype: mysticreelparts
handi2
Sensei
Member
***
Online Online

Posts: 3206


OCD Reel Service and Repair


« Reply #21 on: July 08, 2018, 12:12:41 PM »

I have the Black felt washer if you still want it.

Keith
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.201 seconds with 16 queries.