alan tani @ alantani.com fishing reel repair rebuild tutorial SX 5.3 spool tube length?
Reel Repair by Alan Tani
August 14, 2018, 11:34:44 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: SX 5.3 spool tube length?  (Read 202 times)
0 Members and 1 Guest are viewing this topic.
Natarach
Member
*
Offline Offline

Posts: 42


« on: July 11, 2018, 05:22:10 PM »

Hi

My friend asked me about the sound when shake the reel in left-right direction.
 I think it is the sound of spool tube (no. 15) so I test it by greasing the spool shaft make it a bit sticky on the area that contact the spool tube. And the sounds gone.

My question is
1.   what is the length of the SX5.3ís spool tube ?  My friendís is 2.3 cm (My SX is not with me so I cant inspect mine  for him  Embarrassed
2.   Is it normal to have the gap between spool bearings and spool tube?

Ps. I tried to search internet to find the lengt and not found  Embarrassed

Regards,
Natarach


* 518AB7B7-6405-4266-B10B-D765E90EEB84.png (501.31 KB, 1334x750 - viewed 16 times.)
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 15965



« Reply #1 on: July 11, 2018, 05:44:49 PM »

this is tough, because it has to be exact.  well, either exact or 1-2 thousandths over.   you almost have to do this with a reel in hand. 
Logged

send me an email at alantani@yahoo.com for questions!
Natarach
Member
*
Offline Offline

Posts: 42


« Reply #2 on: July 11, 2018, 06:20:02 PM »

this is tough, because it has to be exact.  well, either exact or 1-2 thousandths over.   you almost have to do this with a reel in hand. 

Hello    I found this  Cheesy

But cant figure it out about the gap/no gap between spool bearings and tube.  Grin


* 281D5D73-5B18-4834-96BE-953C0077BD22.jpeg (81.5 KB, 600x450 - viewed 76 times.)
Logged
Natarach
Member
*
Offline Offline

Posts: 42


« Reply #3 on: July 12, 2018, 06:03:42 AM »

Ok I have the answer.

The spool tube that I mentioned is SHORTER than other SX. Itís 22mm. instead of 25mm I will ask the authorized deler in Thailand for what they can do for me  Cry


* 0A01FF83-372F-4C27-BBF7-A8ED5CD4BE9E.jpeg (1864.27 KB, 4032x3024 - viewed 16 times.)
Logged
alantani
admin
Administrator
Member
*****
Online Online

Posts: 15965



« Reply #4 on: July 12, 2018, 06:44:59 AM »

the bearing sleeve is supposed to touch both bearings without being too long.  it has to be an exact length.  are you saying your's is too short?  if that's the case, you'll need a new one from avet.  or you have to make your own. 

http://alantani.com/index.php?topic=138.0
« Last Edit: July 12, 2018, 06:46:31 AM by alantani » Logged

send me an email at alantani@yahoo.com for questions!
Natarach
Member
*
Offline Offline

Posts: 42


« Reply #5 on: July 12, 2018, 07:20:25 AM »

the bearing sleeve is supposed to touch both bearings without being too long.  it has to be an exact length.  are you saying your's is too short?  if that's the case, you'll need a new one from avet.  or you have to make your own. 

http://alantani.com/index.php?topic=138.0

Thatís really good tutorial Mr. Alan ! Thank you so much.  Maybe I have to follow your advice if the dealer have no spare part.
Logged
Natarach
Member
*
Offline Offline

Posts: 42


« Reply #6 on: July 12, 2018, 10:34:58 PM »

Got a new one from the shop that I purchased.  Hope it will be okay this time  Smiley
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.12 seconds with 17 queries.