alan tani @ fishing reel repair rebuild tutorial Lever drag reelís initial drag
Reel Repair by Alan Tani
August 18, 2018, 11:29:39 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Login Register  
Pages: 1 [2]   Go Down
Author Topic: Lever drag reelís initial drag  (Read 364 times)
Rickman and 2 Guests are viewing this topic.
Online Online

Posts: 316

« Reply #15 on: August 12, 2018, 07:18:32 PM »

Try this.  The drags in mine needed a little run in, cleaning then greased.  The grease inside the reel was inconsistent and I am betting one reel has a better greased drag then the other so your getting a higher initial drag from the dry disk.

Mine is still going strong
Online Online

Posts: 310

« Reply #16 on: August 17, 2018, 03:33:48 PM »

Iím sure it is a manufactureís problem. The other sounds right.

Iím still trying to find their 9+2 bearings.

There's 2 in the handle knob (2), 1 on each end of the driveshaft (4), 2 anti-reverse bearings on the driveshaft (4+2), one in the drag cam cos it's a twin drag and the spool shaft is driven (5+2), the pinion (6+2), the spool bearings (8+2) and the left side plate bearing (9+2)

Just if we're being pedantic Smiley

Always makes me laugh when you see some reels, usually spinners out of Asia, promoting their 17 bearings or whatever, and there will be 4 ball bearings in the handle and the bail arm will have bearings on each side and all sorts of silly locations.

Joao Tavares
Online Online

Posts: 20

« Reply #17 on: Today at 02:46:17 AM »

I bought one of those on line last X-mas and had to return it because the preset knob was stuck. Wouldn't turn either way by hand and I didn't want to risk using any tool to turn a plastic knob.
The seller confirmed the reel was bad.

It is sad that this maker has such a poor quality control because the reel seems to be well engineered and everything about it seems nice. If you get a good reel you're fine. If you get a bad one, you have to return it.

I ended up getting a Shimano Torium 16HGA instead.

Pages: 1 [2]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.101 seconds with 18 queries.