calcutta 400a

Started by alantani, December 07, 2008, 04:55:24 PM

Previous topic - Next topic

Jigtosser and 1 Guest are viewing this topic.

cjinscore

Quote from: alantani on April 13, 2015, 09:05:24 PM
in the mail!

Alan,

Received the springs a few days ago.  They worked perfectly and the reel is now running like a dream.  Thank you very much for getting those to me.

thorhammer

Hey Boss, Merry Christmas! Digging into a 400 I picked up a couple years ago. AR wasn't working, which is probably why I got it cheaply, and sitting in a drawer since. Tore it down, and a shot of Corrosion X in the ARB seems to have it working again. As per your comment about these not being SS- this one came from the beach and by all appearances had never been serviced, so no real surprise there. Appears to be 1990's gen 1 with teak handle- is that an "A", by default? If so, do you have any of the ARB's left? I'd as soon replace it and then I know what I have. If you do, lemme know the damage, and I also need another wrench for the second shop- The Covid Cave :)

alantani

if you can measure the inside diameter and height, they will be in millimeters.  the outside case will have a minimum and maximum, also in millimeters.  let me know and i can get them right out. 
send me an email at alantani@yahoo.com for questions!

thorhammer

I get 10.18 ID; 16.99 OD on the ribs.

alantani

height? min and max outside diameters?

send me an email at alantani@yahoo.com for questions!

alantani

it's either 10 x 10 x 16/17 or 10 x 12 x 16/17
send me an email at alantani@yahoo.com for questions!

thorhammer


alantani

send me an email at alantani@yahoo.com for questions!

thorhammer

Quote from: alantani on December 22, 2020, 12:09:33 AM
it's either 10 x 10 x 16/17 or 10 x 12 x 16/17


it's the latter. This is kind of embarassing that I didn't read your request better. Part of what I do for a living is QA on packaging dimensions of bottles...ID/OD, thread pattern. That's what happens after you test land-and-groove pattern on a few Belgian ales :)

alantani

got it.  there are only a couple of options.  it was not hard to figure out. 
send me an email at alantani@yahoo.com for questions!

thorhammer


alantani

you're good.  bring more beer!!!!!
send me an email at alantani@yahoo.com for questions!

thorhammer


jcarufo

Hi Alan,
I have (I actually have 2) topless 400S that we used to use in Cabo in the late 90's. They were abused and put away dirty and kind of forgotten. I want to use them again and found the first one to be 'almost' frozen. I took everything apart, soaked, cleaned and Corrosion X'ed everything and even the anti reverse bearing seems to be perfect. My problem is that on reassembly the two BNT 1133 Yoke Springs are missing. Don't know where they went. Are they still available and if so can you steer my in the right direction to access a pair, please? I'd really appreciate any guidance you can provide.
That being said, I registered for your site years ago, but never really spent much time here until now. Your site is amazing! It's made me want to dig out an old Pro Gear 454(?) that I tried to change drag washers in years ago and still can't put back together and the Shimano TLD II 20's and 30's 2 speeds that I'd love to find old Tiberon Frames for. Your site has definitely gotten me in the 'maintenence/upgrade' mood for all our well used and loved equipment. Again, thank you.       

alantani

here are the springs! 

https://www.ebay.com/itm/2-NEW-SHIMANO-BAITCASTING-REEL-PART-2-Yoke-Spring-BNT1133-/402653268201

and the post for servicing the reel.

https://alantani.com/index.php?topic=29.0

the 454 is basically a penn 113h senator. 

https://alantani.com/index.php?topic=208.0

for the old shimano two speeds, i'd recommend a handle upgrade only.  the tiburon frames are no longer available. 

https://alantani.com/index.php?topic=12789.0

here is the post for servicing the tld two speeds. 

https://alantani.com/index.php?topic=38.0

please keep us posted!!!!  ;D
send me an email at alantani@yahoo.com for questions!