alan tani @ alantani.com fishing reel repair rebuild tutorial Penn 930 carbontex drag washers
Reel Repair by Alan Tani
October 20, 2018, 11:35:57 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Penn 930 carbontex drag washers  (Read 4738 times)
0 Members and 1 Guest are viewing this topic.
mickrazz
Member
*
Offline Offline

Posts: 7


« on: January 10, 2012, 03:46:45 PM »

Dawn, can you help me with these?

Thanks in advance,

Mick
Logged
Dawn
Webmaster
Member
****
Offline Offline

Posts: 481



WWW
« Reply #1 on: January 11, 2012, 12:00:27 PM »

Hi Mick

I don't have this size.  It's part #6-910.  Maybe Alan has some, or you could get them from mysticparts.com

Dawn


"Edited as per Moderators to correct Scott's Bait & Tackle over to their new store name Mystic Reel Parts / www.mysticparts.com"

« Last Edit: August 20, 2018, 11:04:23 AM by mizmo67 » Logged

Dawn
alantani
admin
Administrator
Member
*****
Online Online

Posts: 16215



« Reply #2 on: January 11, 2012, 01:49:29 PM »

i take a #6-965 and cut it down to size with a grinder.  i would need the reel in hand because i don't have any cut ahead of time. 
Logged

send me an email at alantani@yahoo.com for questions!
Dawn
Webmaster
Member
****
Offline Offline

Posts: 481



WWW
« Reply #3 on: January 11, 2012, 03:04:33 PM »

I think it's close to a Penn 140 size also
Logged

Dawn
alantani
admin
Administrator
Member
*****
Online Online

Posts: 16215



« Reply #4 on: January 11, 2012, 03:45:57 PM »

hey, that's right!  just grind three of the #6-965's down to the outside diameter of a #6-155.  the drag washer under the gear needs to be ground down more. 
Logged

send me an email at alantani@yahoo.com for questions!
Dawn
Webmaster
Member
****
Offline Offline

Posts: 481



WWW
« Reply #5 on: January 11, 2012, 05:50:09 PM »

Hey Mick, if you find a replacement, maybe you could send me an old one so I can have a look?

Dawn
Logged

Dawn
mickrazz
Member
*
Offline Offline

Posts: 7


« Reply #6 on: January 12, 2012, 07:40:06 AM »

Will do Dawn. Thanks for trying.
Logged
Dawn
Webmaster
Member
****
Offline Offline

Posts: 481



WWW
« Reply #7 on: January 12, 2012, 10:52:15 AM »

Hi Mick
I was looking around and it seems like if you can find a replacement it's leather, so if you want to go ahead and send me one or give me measurements I can see what I can find for you.

Dawn
Logged

Dawn
triumphrick
Where the heck is Masaryktown??!!
Member
*
Offline Offline

Posts: 141



« Reply #8 on: May 24, 2016, 04:23:06 AM »

I have found the Penn spinning 750-7500 drag washers are a perfect fit for this reel..
Logged

ricksreelservice.com
handi2
Sensei
Member
***
Offline Offline

Posts: 3224


OCD Reel Service and Repair


« Reply #9 on: May 24, 2016, 04:26:08 AM »

It's the 6-155's or 6-60's as Rick mentioned above.
Logged

OCD Reel Service & Repair
Gulf Breeze, FL
nelz
Member
*
Offline Offline

Posts: 527



« Reply #10 on: September 20, 2018, 10:56:39 AM »

Hi Mick
I was looking around and it seems like if you can find a replacement it's leather, so if you want to go ahead and send me one or give me measurements I can see what I can find for you.

Dawn

Hi Dawn, did you ever find rersolve this?
Logged
Dawn
Webmaster
Member
****
Offline Offline

Posts: 481



WWW
« Reply #11 on: October 02, 2018, 10:54:50 AM »

Yes, it can use the same set as Penn 140 / Squidder.

Dawn
Logged

Dawn
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.193 seconds with 16 queries.