bearing sizes by reel - a running list

Started by alantani, January 17, 2012, 12:22:53 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Ken_D

#15
Quote from: reel bob on March 20, 2012, 06:22:26 PM
Penn 345 GTi Gear Stud - Part # 55-80ST - .500 x .875 x .2188 or 1/2 x 7/8 x 7/32

Heres the size...Problem I have is where to purchase this size bearing other than Boca or Scotts. There has to be cheaper prices than what they want...Any Help?

Hi. This is that top bearing under the star. the common Industry "confusers" are R1412, R1412ZZ, R6-1/2, and R6ZZ-1/2.  Try AST bearings in New Jersey....the stainless ones were 7.00 a couple of years back.

If fully rusted closed, they can be made runnable till you get one. All you need is a rotary tool, like an actual dremel, or one of the clones. Remove bearing off driveshaft, adjust channel-lock or vise grip type pliers to hold the OD of the brg.

Take a cutoff wheel, and cut a slot across the inner race. Use a big screwdriver to loosen the bearing up, so you can re-grease.The assumption being that the rust has not totally disintegrated the balls, or the cage. (Usually not)  This will get you by, sometimes hardly even rough. Most times, a little thump, but runnable till the new one gets in.

Irish Jigger

#16
Shimano TLD15
(2) - 6x12x4mm
(2) - 7x17x5mm
All on spindle.

treidm

#17
ABU Ambassadeur 5000-5000A

Left & Right Spool
3 x 10 x 4
"If capitalism is fair then unionism must be. If men have a right to capitalize their ideas and the resources of their country, then that implies the right of men to capitalize their labor."

--Frank Lloyd Wright

redsetta

#18
Penn 9500SS
  • Pinion bearing: 10 x 26 x 8mm (S60002RS) x 1
  • Left/right side main gear bearings: 9.525 x 22.225 x 7.142mm (SR6A-ZZMC3) x 2

PS The main gear bearings are imperial (3/8 x 7/8 x 9/32), but they're all translated to metric here in NZ.
Fortitudine vincimus - By endurance we conquer

Irish Jigger

#19
Penn Formula 10KG  (Two Speed.)
LS Spool 10x26x8 mm.
RS Spool 7x22x7 mm.
RS Spindle 7x13x4 mm.
Handle Drive Shaft 10x26x8 mm.

LTM

Alan and Bryan,

Where do I find this BB list?  Ive been documenting my reels with drag and BB dimensions, I may be able to contribute to the list.

Leo

redsetta

G'day Leo,
Just post here and, as the number of posts grows, it'll be compiled into a standalone list.
Great work documenting these BB/drag sizes by the way. ;)
Cheers, Justin
Fortitudine vincimus - By endurance we conquer

Ken_D

Quote from: reel bob on March 20, 2012, 06:22:26 PM
Penn 345 GTi Gear Stud - Part # 55-80ST - .500 x .875 x .2188 or 1/2 x 7/8 x 7/32

Heres the size...Problem I have is where to purchase this size bearing other than Boca or Scotts. There has to be cheaper prices than what they want...Any Help?

AST in CA/NJ about 8.00 and adds,  SMB in England for about  6 UKP for the Japanese ones, and 2 UKP for the Chinese ones plus adds and wait.   SMB is calling them SR6ZZ-1/2  Both the Japan and the Chinese are stainless.

Bryan Young

Right Side - 6 x 12 x 4 mm
Left Side - 0.125 X 0.375 X 0.155 inches
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Dr. Jekyll - AKA MeL B

#24
courtesy of Alan Tani

LS 4 x 11 X 4 mm
RS 6 x 12 x 4 mm

Dr. Jekyll - AKA MeL B

#25
courtesy of Boca Bearings

Both Sides  ID 0.1250in x OD 0.3750in x Width 0.1562in

erikpowell

Trinidad TN50

spool bearings
6x13x5
7x14x5

bearing underneath main shaft- TGT0458
6x10x3

Mike La Franchie

#27
Shimano TR200G there is only one bearing   Part number TGT0596   7x14x5mm no shields

Okuma Zeta ZE80(Also known as a Diezel DZ80)     
drive gear   part number 01102006-5   9x17x5mm
pinion gear   part number 01091705-5       10x20x6mm

Penn 760L               
Drive Gear part number 20-6500 bearing size 9x17x5
Pinion Gear, part number 20-760, bearing size 10x18x5mm.

Mitchell Quartz 350
Drive gear bearings 7x12x2.5
pinion gear bearing 8x14x3.5

I've got the drag washers sizes for the above reels if anyone wants them.
I only fish on days ending with Y

Irish Wake

Penn 225LD Bearing
Part#
55-116  Spool Bearing #55  .186 X.500X.196      2 req
26N-25   F/L Spool,Br  #26A .272 X.748 X .234   1 req
26N-25   F/Spool Br     #26  .272 x .748 x .234   1 req

erikpowell

#29
Shimano Tyrnos Single speed... with shimano part #'s

20/30   TGT0641   7x14x5       spool bearing x2         From Smoothdrag order set #78 (1ea 9x20x6 & 7x14x5)
          TGT0827   7x17x5        pressure plate                                      and  set #44 (1ea 7x17x5 & 7x14x5)
          TGT0813   9x20x6        RT side plate


50LRS  TGT0483   8x16x5        spool bearing x2                        Smoothdrag set #46  (1ea 8x16x5 & 8x19x6)     
         TGT1429   8x19x6        pressure plate                                           
         TGT1418  10x22x6        RT side plate                            Smoothdrag stocks single bearing

       If you need to replace BOTH spool bearings in the 50, you'll need an extra 8x16x5 (which Dawn doesn't list separately)                                       
                                      or an additional set 46.


Thanks, Erik