bearing sizes by reel - a running list

Started by alantani, January 17, 2012, 12:22:53 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Nigelr

Quote from: alantani on January 17, 2012, 12:22:53 AM
jimmer had a great idea of having a running list of the different sizes of bearings for all the reels.  and he's right.  if everyone chips in, this could be a real time saver for everyone.  the list will go by manufacturer (penn, shimano, etc.), then by model name (say, curado), then by model number (100D, 300E) and then by bearing location with the dimensions (left spool 4x11x4).  just post your bearing dimensions here and the moderators will add it to the list.  jimmer, thanks for the great idea!

Fin-nor Primal PR10HS

2 of 5 x 11 x 4 (115ZZ) – spool
1 of 5 x 16 x 5 (625ZZ) – spool
1 of 6 x 16 x 5 (696ZZ) – drag
1 of 8 x 16 x 5 (688ZZ) – outer handle
1 of 10 x 19 x 5 (6800ZZ) – inner handle
Anti reverse bearing is INA F-223251

shogunsc4

Any chance, anyone have the bearing sizes for a saltiga ld20 2 speed?

Cor

#77
SHIMANO TRANX 500 HG

BNT4429   Ball Bearing   Handle outer                4 X 9 X 4
BNT4194   Ball Bearing   Handle inner and drive shaft   5 X 9 X 3
BNT4447   Roller Clutch Bearing            
BNT4446   Ball Bearing   Right Pinion                7 X 13 X 4
BNT4479   Ball Bearing   Left pinion                       10 X 15 X 4
BNT4488   Ball Bearing   Left spool                       4 X 11 X 4
??          Ball Bearing   Right spool large            6 X 12 X 4
 
Cornelis

buzzawak

Sorry is there a formatted list or is it a case of just searching the topic ?

---
Shakespeare: Surp/Pier SP50A
PINION BALL BEARING 8 x 16 x5



dh515

#79
Shimano Speedmaster 12ii and 16ii

Left spool (1) #TGT2564 = (7X17X5)MM
Right spool (1) #TGT1583 = (7x14x5)MM

Drag plate bearing (1) #TGT 1583 = (7x14x5)MM

https://www.reelschematic.com/wp-content/uploads/schematics/Shimano/Speedmaster/Shimano%20Speedmaster%2019SM12LD2.pdf


Andygomez23

Quote from: ebnash on March 20, 2012, 02:34:00 PM Avet HX Raptor - 2012 Production(Keep in mind that this may not cover your reel as I have seen other dimension for HX Raptor in earlier productions)

Left Spool – 6 X 12 X 4
Right Spool – 6 X 12 X 4
Left Pressure Plate – 6 X 19 X 6
Right pressure Plate - 6 X 12 X 4
Inner Drive Shaft - .375 X .625 X .156
Outer Drive Shaft - .375 X .625 X .156
Right Plate – 6 X 19 X 6


Has this list of bearings been updated? Looking to replace bearings on my hard.

Andygomez23

Quote from: Andygomez23 on February 15, 2023, 01:43:30 AM
Quote from: ebnash on March 20, 2012, 02:34:00 PM Avet HX Raptor - 2012 Production(Keep in mind that this may not cover your reel as I have seen other dimension for HX Raptor in earlier productions)

Left Spool – 6 X 12 X 4
Right Spool – 6 X 12 X 4
Left Pressure Plate – 6 X 19 X 6
Right pressure Plate - 6 X 12 X 4
Inner Drive Shaft - .375 X .625 X .156
Outer Drive Shaft - .375 X .625 X .156
Right Plate – 6 X 19 X 6


Has this list of bearings been updated? Looking to replace bearings on my hard.

Hx raptor.. dam spell check

hotajax

PENN 980 Mag Power
Spool Bearings:  Handle Side 0.125" x 0.375" x 0.15"
                 Left side 0.187" x 0.500 x 0.196"

Is probably the same for Penn 970 and 990.  I know for sure there were three reels in the Mag Power Series.