drag washer sizes by reel - a running list

alantani · January 17, 2012, 12:31:58 AM

jimmer had a great idea of having a running list of the different sizes of drag washers for all the reels. yes, jimmer is on a roll. if everyone chips in, this could be a real time saver for everyone. the list will go by manufacturer (penn, shimano, etc.), then by model name (say, curado), then by model number (100D, 300E) and then by drag washer location with the dimensions. the first drag washer will be the one under the gear, then numbered in order of assembly. just post your drag washer dimensions here and the moderators will add it to the list. to make it easy, let's put them all in millimeters (ID x OD x TH). jimmer, thanks for the great idea!

wallacewt · January 17, 2012, 04:41:58 AM

what about stacks that have been changed and are not the originals.material,size and thickness.

alantani · January 17, 2012, 07:37:37 AM

not sure. this is sort of a work in progress......

D impala95 · February 23, 2012, 11:19:17 PM

Penn Captiva Liveliner CLL5000

(3) spool washers 5 x 19.5 x 0.75
(1) baitrunner washer 8.25 x 20 x 1.03

D impala95 · February 25, 2012, 08:43:48 AM

Shimano Sustain 1000FD

(1) 4.15 x 19.64 x 1.08

D impala95 · February 28, 2012, 04:15:40 AM

Shimano Calcutta CTE250DC

Under gear 8x25.5x1.03
Main drag 24.50x32.90x1.05

The main drag size can be increased by decreasing the the inner diameter to 11.20x32.90x1.05.

I'm not sure how wise that would be as the drag registers #8.5 with Carbontex.

D impala95 · February 29, 2012, 10:52:49 AM

Pflueger President WLPL

Under gear 8x18.50x0.95
Main drag 16x26x1

Jimmer · March 03, 2012, 04:10:00 PM

Shimano charter special 19.2x44.5x1.25 ears at 90 degrees 5.7 wide x 47.7 across

Jimmer · March 19, 2012, 09:44:56 PM

Okuma convectors cv30d and cv45d other 30 and 45 size convectors. Under bearing - 9x33.15x.55 in gear 1) 13x33x1.1 2)8x36x1

LTM · June 12, 2012, 05:05:36 PM

Alan and Bryan,

Where do I find this BB/drag washer list? Ive been documenting my reels with drag and BB dimensions, I may be able to contribute to the list. What format do I use: OD, ID, WIDTH (THICKNESS)?

Leo

Dave Bentley · June 12, 2012, 06:43:48 PM

Daiwa SL50SH
4 off 32.9 OD x 9.8 ID x 1.1
1 off 20 OD x 8.1 ID x 1.1
1 off 25.6 OD x 8.6 ID x 1.1

LTM · June 13, 2012, 02:12:44 AM

Sorry guys,

I found the list's.

Leo

JEAT · July 28, 2016, 09:40:02 PM

'15 Shimano Calcutta Conquest 300

3 stack
27 OD x 8.5 ID X .5

Main gear
27 OD x 8.5 ID X 1

xaf · July 29, 2016, 07:02:03 AM

Daiwa Tanacom 1000

Small - Need 1 (Under main Gear) = Smooth Drag Carbontex # 10 - O.D. = 20.5 mm, I.D. = 08.1 mm, Thickness = 0.5 mm

Large - Need 5 (actual drag washers) = Smooth Drag Carbontex # 15 – O.D. = 21.6 mm, I.d. = 10.6 mm, Thickness = 0.76

Meanwhile · December 10, 2016, 12:31:13 AM

Daiwa Tanacom 750fe Bull, 5 years old reel.

Small - Need 1 (Under main Gear) = O.D. = 19.56 mm, I.D. = 07.5 mm, Thickness = 0.55 mm

Large - Need 5 (actual drag washers) = O.D. = 18.65 mm, I.d. = 8.95 mm, Thickness = 0.76

I can add Smooth Drag info when I receive the answers from Dawn.

Randy

Note that the 750fe uses smaller drag disks than the US version of 750. The metal disks also use four ears v. two.