alan tani @ alantani.com fishing reel repair rebuild tutorial Okuma CD65, anti reverse problem
Fishing Reel Repair by Alan Tani
July 30, 2014, 01:13:25 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Okuma CD65, anti reverse problem  (Read 1258 times)
0 Members and 2 Guests are viewing this topic.
Brewskey
Member
*
Offline Offline

Posts: 18



« on: February 26, 2012, 06:15:29 PM »

Hey guys,

I just rebuilt my Okuma Coronado CD65 baitfeeder and now it is as smooth as the day I bought it 10+ years ago. But, after getting it put back together the anti reverse only works sometimes.  I'm stumped, I'm sure its something to do with the one way bearing but I'm not sure how to correct it. Any ideas?
Logged
redsetta
Moderator
Member
***
Offline Offline

Posts: 2137


Auckland, New Zealand


« Reply #1 on: February 26, 2012, 06:59:56 PM »

G'day Pirogue,
Is the AR bearing clean, free of grease etc and lubed with a light oil, such as ReelX or similar?
Any grit or grease in the mechanism will cause this.
If it's clean etc, it may not be engaging/disengaging fully.
Is the AR lever under the spool correctly aligned, moving smoothly and fully actuating against the bearing?
I believe they've got a big old-school AR bearing like a BTR6500B, so you may be able to fully dismantle it. I wouldn't jump into that lightly, though - lots of little parts that are easily damaged and/or lost.
The bearing may also just be 'toast'...
Let us know how you get on.
Good luck, Justin
Logged

Fortitudine vincimus - By endurance we conquer
Brewskey
Member
*
Offline Offline

Posts: 18



« Reply #2 on: February 26, 2012, 07:20:25 PM »

Thanks for the response Redsetta,
  The AR bearing is clean as a whistle and lubed with Corrosion X. Seems like its not engaging or partially engaging if that makes any sense. Sometimes it works fine and other times there is no AR at all. It was working fine before I stripped the reel for cleaning/lubing so it must be something I've done to it.... Wink

Thanks again!
Mike
« Last Edit: February 26, 2012, 07:21:09 PM by Pirogue » Logged
Bryan Young
Administrator
Member
*****
Online Online

Posts: 5405


The Reel Whisperer


« Reply #3 on: February 27, 2012, 12:47:49 AM »

As I recall, the ARB has a couple of springs that help keep it aligned.  You may want to try to reassemble it.  I made the mistake in disassembling mine and took me a hour to get everything all aligned with the springs and all.
Logged

Cheesy I talk with each part I sends out and reel I repair so they perform at the top of their game. Cheesy
Brewskey
Member
*
Offline Offline

Posts: 18



« Reply #4 on: February 27, 2012, 01:34:31 PM »

As I recall, the ARB has a couple of springs that help keep it aligned.  You may want to try to reassemble it.  I made the mistake in disassembling mine and took me a hour to get everything all aligned with the springs and all.

I think you are right Bryan. I'll have to play with that bearing some more to see whats going on with it. I'm sure its something simple, probably with the springs, that I'm overlooking.

Logged
cavalier
Member
*
Offline Offline

Posts: 5


« Reply #5 on: June 09, 2014, 09:41:31 PM »

Hi,

I am facing a similar problem with my Coronado CD80a. The ARB is not working & the reel moves freely in both directions even after shifting the lever. There is a tiny spring next to the bearing to pull back the ARB mechanism on moving the lever,any suggestions on assembly. I had greased the bearing rollers, guess I will have to clean them again & lightly oil them. Any pics would be a bonus
Regards
Cavalier
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.12 seconds with 17 queries.