alan tani @ alantani.com fishing reel repair rebuild tutorial Newell Parts???
Reel Repair by Alan Tani
November 17, 2017, 09:17:41 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Newell Parts???  (Read 4851 times)
0 Members and 1 Guest are viewing this topic.
Cortez_Conversions
Sensei
Member
***
Online Online

Posts: 819



WWW
« on: September 12, 2012, 05:56:33 PM »

So with Newell out of the picture for the immediate future, what replacement parts are going to be needed first?
I just dropped some handle nuts off at Alans place, whats next?
Logged

Visit: cortezconversions.com
Panama
Member
*
Offline Offline

Posts: 110


« Reply #1 on: September 12, 2012, 06:07:01 PM »

I think bearing caps and the threaded inserts that go on the top of the reel....holds the top screws. Those inserts always strip. 5:1 gears and pinions are a hot ticket always.
Anthony
Logged

Get on the water, Man!!!
alantani
admin
Administrator
Member
*****
Online Online

Posts: 14735



« Reply #2 on: September 12, 2012, 08:26:48 PM »

got the handle nuts.  the price is $8 with shipping included.
Logged

send me an email at alantani@yahoo.com for questions!
Panama
Member
*
Offline Offline

Posts: 110


« Reply #3 on: September 12, 2012, 08:33:56 PM »

Great price. Don't need any now but I know where to get one if I do!
Logged

Get on the water, Man!!!
alantani
admin
Administrator
Member
*****
Online Online

Posts: 14735



« Reply #4 on: September 12, 2012, 08:43:04 PM »

it's basically cost plus shipping.
Logged

send me an email at alantani@yahoo.com for questions!
TEAMFISH
Member
*
Online Online

Posts: 27


« Reply #5 on: September 14, 2012, 11:40:59 AM »

I think bearing caps and the threaded inserts that go on the top of the reel....holds the top screws. Those inserts always strip. 5:1 gears and pinions are a hot ticket always.
Anthony

What I did find is that the little captive female standoff is available from McMaster Carr. It comes with a 4-40 thread and Newell uses a 5-40 thread. I just had to get the right tap and basically chase the threads, worked perfectly. From what i found they are the same for most 200 and 300 series Newells. I now have a couple dozen extra but for $ 10.00 plus change, i can live with it.
http://www.mcmaster.com/#cadinlnord/93090a430/=j375yr 
 
 
 
Logged
bluefish69
Member
*
Online Online

Posts: 1976


Just West of J.F.K. Airport N.Y.


« Reply #6 on: September 14, 2012, 03:18:38 PM »

I think bearing caps and the threaded inserts that go on the top of the reel....holds the top screws. Those inserts always strip. 5:1 gears and pinions are a hot ticket always.
Anthony

What I did find is that the little captive female standoff is available from McMaster Carr. It comes with a 4-40 thread and Newell uses a 5-40 thread. I just had to get the right tap and basically chase the threads, worked perfectly. From what i found they are the same for most 200 and 300 series Newells. I now have a couple dozen extra but for $ 10.00 plus change, i can live with it.
http://www.mcmaster.com/#cadinlnord/93090a430/=j375yr 
 
 
 


I tried the same thing as TEAMFISH  --  So far I am $25 in the hole for taps & have only 5 complete. I will be rdering more Taps tomorrow [ tapered & bottoming taps ].
Logged

I have not failed.  I just found 10,000 ways that won't work.
Cortez_Conversions
Sensei
Member
***
Online Online

Posts: 819



WWW
« Reply #7 on: September 15, 2012, 10:02:37 AM »

Buy the correct drill  for a 5-40 and you won't break as many taps.
A #39 drill should do the trick for you.
Good luck!
Logged

Visit: cortezconversions.com
bluefish69
Member
*
Online Online

Posts: 1976


Just West of J.F.K. Airport N.Y.


« Reply #8 on: September 15, 2012, 10:11:40 AM »

These are taped already for 4/40. I will give a try. I think McMaster said size 38 no mater I have both.
Logged

I have not failed.  I just found 10,000 ways that won't work.
GKFISH
Member
*
Offline Offline

Posts: 6


« Reply #9 on: October 15, 2012, 01:24:44 PM »

Hello All...What about the the U-5 MK (metal) l/s bearing cap that replaced the U-5 (plastic) l/s bearing caps.

GKFISH
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Simple Audio Video Embedder
Valid XHTML 1.0! Valid CSS!
Page created in 0.186 seconds with 17 queries.