TUTORIAL: Okuma Magnetix MG-30CS

Started by Dan, March 22, 2010, 04:00:11 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

pompano joe

Anyone ever figure out the "deformed spring"?  Looks like the spring out of a Shimano Baitrunner.
Pompano Joe

Tiddlerbasher

Old thread I know ::) The deformed spring is for the auto trip mechanism just leave it out and follow the recomendation posted earlier. I have the Okuma MS 30-CS it is similar but built like a tank. Fitted a power handle and every cast the auto trip clicked in - snap off. The solution was to follow the earler post and make it manual trip only. And there should be an antireverse dog and spring see the attached schematic (for the Mag Sysytem CS30 but basically the same) parts 201, 211 and 216 are the required bits.