Penn formula 10Kg gear sleeve dimansions?

[trond_solem]

I need to make a crank arm for the Penn Formula 10 kg reel. To do this I need to know the dimensions of the gear sleeve where the crank sits. Marsuring the hole in the crank arm may or may not be accurate enough. I prefer the measurements from the gear sleeve end
Someone who can help me with this?

[alantani]

crud.  i had a 15 kg that i could have measured out for you, but i just shipped it out.   

[David Hall]

Got one I can measure but first I have to go back to the tutorial and see how to get the handle off!

[David Hall]

Got it.
9.6mm  flat side to flat side
10.28 mm overall around.

From the crank

9.68 s-s
10.3 overall

[David Hall]

This is from my 10KG

[trond_solem]

Got it.
9.6mm  flat side to flat side
10.28 mm overall around.

From the crank

9.68 s-s
10.3 overall

Great!
Thanks.