Speedmaster 3 bearings

Started by Sulla, January 14, 2015, 06:46:04 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Sulla

January 14, 2015, 06:46:04 AM
I'm haveIng trouble finding bearings for my Speedmaster 3. I need to replace the 2 spool bearings. A friend of mine said they are the same as the Trinidad 14 bearings?  I thinking they don't make bearings for the old Speedmasters anymore, but I'm not sure. 

Bryan Young

#1
January 14, 2015, 06:54:39 AM
Hi Bill,

We will need the ID, OD and width of the bearing in mm.  I'm sure they are one of the standard sizes.

Bryan
:D I talk with every part I send out and each reel I repair so that they perform at the top of their game. :D

Sulla

#2
January 14, 2015, 11:57:05 PM
I was checking out Allen's tutorial right above my posting and he has the left and right Barry measured at 4x11x4 mm  and 6x12x4mm.

handi2

#3
January 15, 2015, 12:30:01 AM Last Edit: January 15, 2015, 12:30:58 AM by handi2
Where are you located? I can mail them to you if you are sure they are the correct size. Just send a message in the PM section

Keith
OCD Reel Service & Repair
Gulf Breeze, FL

handi2

#4
January 19, 2015, 12:42:10 AM
I mailed them out Thursday of last week so keep a look out for them.

Keith
OCD Reel Service & Repair
Gulf Breeze, FL

Sulla

#5
January 22, 2015, 03:55:55 AM Last Edit: January 22, 2015, 03:56:52 AM by Bill Carson
Hi Keith,
I got the bearings today. I really appreciate it!

Carlos
Print
Go Up Pages1
User actions