Accurate BX2 Spool Bearing

[Mr GreenJeans]

I am looking to replace my BX2-400 spool bearings and they don't appear to be a standard size.  My calipers show the size as ID 3/16", OD 1/2", and width 3/16".  However, Boca and Smoothdrag don't appear to carry this size.  Are my calipers off?  Does anyone know what size the spool bearing is supposed to be?

Thanks.

[bdoc]

try reading them in millimeters

[Mr GreenJeans]

Tried that.  Unfortunately, it doesn't measure out in a nice even number of mm.  For example, the OD is about 12.5 mm, which is also not a stocked item.

[Phinaddict]

3/16 x 1/2 x .196" is common... would that fit?

[Mr GreenJeans]

I checked Boca and they do stock bearings in 3/16 x 1/2 x .196".  In another post, Alan listed that size as the bearings for the older Boss reels.  Unfortunately, his post is silent on the newer BX2 reels.  I may just have to buy some and see if they fit.  Thanks.