sx - 3/8/06

Started by alantani, February 16, 2009, 06:50:23 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Fish-aholic

Hi guys,

I have a question. The little bearing housed inside the drag plate, is it best to grease it or is oil the better option?

Cheers in advance,

Fish'


AJ

I use grease, only the two fitted inside the the spool affect freespool so you might as well use grease.  Just be sure not to use too much as it can get on the drag plate OR use Cal's drag grease so if a little gets on the plate it does not matter.

alantani

i grease that one and keep it shielded.  a little yamaha grease on a drag washer will not be too much of a problem. 
send me an email at alantani@yahoo.com for questions!

AJ

I use Yamaha grease as well but I know some people worry about mixing grease (greases???).

Fish-aholic

Thanks, guys! Sounds like I was doing the right thing all along :D

Joel.B

#20
moved

DanteV

Quote from: Fish-aholic on August 31, 2012, 06:20:11 PM
Hi guys,

I have a question. The little bearing housed inside the drag plate, is it best to grease it or is oil the better option?

Cheers in advance,

Fish'



Someday I may have a question that hasn't already been asked.. till then, I love the craft and better get back to my SX!