Daiwa MAGSEAL Patent Number . . .

Started by ez2cdave, January 30, 2018, 04:55:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

ez2cdave

Greetings, Ohana !

Does anyone know what the Patent number is for Daiwa's MAGSEAL technology ?

I have been searching all over the internet, without success ?

Thanks, in advance,

Tight Lines !

exp2000

The patent is held by the Ferrotec Corporation.

From there you can Google till your hearts content.
~

ez2cdave

Quote from: exp2000 on January 30, 2018, 06:05:18 PM
The patent is held by the Ferrotec Corporation.

From there you can Google till your hearts content.
~

So, Daiwa is not only using the Ferrotec ferrofluid, they are also using special bearings made by Ferrotec ?

I have seen a Ferrotec fluid "VSG-203A" being used on a magseal reel on YouTube . . .

Is that the specific ferrofluid Daiwa uses or is it just what someone was trying on their own ?

Thanks,

Tight Lines !

exp2000

I am not familiar with that grade of Ferrofluid.

The genuine Daiwa product is Ferrotec Grade 306.
~

Donnyboat

Hi EXP2000, I am surprized your still on line, I see Broome in the West aussie Kimberly area, has had 915mm of rain, for the month of January, 4 inches to the 100mm. cheers Don.
Don, or donnyboat

ez2cdave

Quote from: exp2000 on January 30, 2018, 11:16:25 PM
I am not familiar with that grade of Ferrofluid.

The genuine Daiwa product is Ferrotec Grade 306.
~

This is the video with the VSG-203A ferrofluid . . . Do you know the complete product name for the "306" fluid ?

Thanks,

Tight Lines !


ReelClean

Quote from: exp2000 on January 30, 2018, 11:16:25 PM
I am not familiar with that grade of Ferrofluid.

The genuine Daiwa product is Ferrotec Grade 306.
~

300 series is a hydrocarbon base, might explain why the Daiwa stuff dries out?  APG and 300 series seems to be synth hydrocarbon vs synth ester, with the 300 allegedly having slightly better water resistance (but the same resistance to humidity?) I am still leaning towards the APG due to the high colloidal stability, ie it should hold itself together better.
Specialist Daiwa reel service, including Magseal.

exp2000

Quote from: Donnyboat on January 31, 2018, 12:36:28 AM
Hi EXP2000, I am surprized your still on line, I see Broome in the West aussie Kimberly area, has had 915mm of rain, for the month of January, 4 inches to the 100mm. cheers Don.

Internet, mobile network, eftpos, the whole show went down for several hours twice now in the last month.

As if cyclones weren't bad enough, now this! The Perfect Storm with wind gusts up to 55 knots!





exp2000

Quote from: ReelClean on January 31, 2018, 03:00:14 AM
300 series is a hydrocarbon base, might explain why the Daiwa stuff dries out?  APG and 300 series seems to be synth hydrocarbon vs synth ester, with the 300 allegedly having slightly better water resistance (but the same resistance to humidity?) I am still leaning towards the APG due to the high colloidal stability, ie it should hold itself together better.

Ok, after reading this I tried researching some organic chemistry on YouTube but in the end it was all too hard.

However, I did come away with this:

Q. Why can you never trust atoms?

A. Because they make up everything!

:D :D :D :D :D :D :D :D :D
~

exp2000

#9
WARNING: A bit of local dialect in this video. You can unmute sound at your discretion.

QuoteWhere the $%@# am I?
I think the white line is over here!



Quote from: Donnyboat on January 31, 2018, 12:36:28 AM
Hi EXP2000, I am surprized your still on line, I see Broome in the West aussie Kimberly area, has had 915mm of rain, for the month of January, 4 inches to the 100mm. cheers Don.

Half of that was in the last two days!
~


Newell Nut

Funny, I thought that was a boat when the video started. A little too much rain.