Okuma CT-205da auto trip mechanism

[retiredandfishing]

Hello.  Ran into a reel I hadn't worked on yet.  It's the Okuma CT-205da.  Took it apart because the auto trip wasn't working.  Found that on the clutch cam the screw hole to hold the clutch slider on had part of the lip broken off, which isn't a big deal.  It's what i did not find that I need help on.

According to the schematics the auto trip mechanism has a compression spring on it.  Trouble is it was missing when I took the reel apart.  Consequently I don't know how it fits back into the mechanism.

Anyone have a picture of a  this models auto trip mechanism or similar auto trip mechanism by Okuma that shows how the compression spring mounts?

This reel is being used by a commercial salmon fisherman.  He likes the feature because he can operate it one handed so disabling the feature is not an option.

Any help you can be would be greatly appreciated.

Steve

[retiredandfishing]

Well and update on this.  Okuma has not responded and I am thinking not too many others have this reel, hence no responses.  So I got the clutch slider and spring in the mail.  Put the new clutch slider in and the reel works fine without the spring, so calling it good.  Wondering if maybe the spring was an added feature later on and this reel is an older model.  Seems to function fine, although I see the clutch slider is built stronger at the screw hole than the old one I took out. 

[alantani]

yeah, it's not a reel that i am familiar with at all.....