drag washer sizes by reel - a running list

[Tom O.]

Daiwa Millionaire - Original models from 1960's, 70's, and early 80's  (including Millionaire II)
Not to be confused with later Millionaire Models
Model 3R, 3RM, 4H, 4HM, 5B, 5H, 5HM, 6B, 6H, 6HM, 6RM, 500M, 600M, 5000M, 6000M =
19.94 mm OD
8.38 mm ID
.89 mm TH
(Three washers)

Model 3H =
22.10 mm OD
12.01 mm ID
.58 mm TH
(Three washers)

Model V =
24.59 mm OD
10.76 mm ID
.93 mm TH
(Just one washer)

[doc.starfish]

Greetings:

I am brand new and still not sure of my way around the forum.  Please kindly show me where to find the drag washer  running list.  Many Thanks!

Tai

[Brewcrafter]

Tai - best way to navigate the forum; hit Welcome and introduce yourself, let folks know why you are here and then everyone can direct you better. - john

[doc.starfish]

Greeting John:

Thank you.  Just posted in "Welcome".

Tai

[borntofish]

I was wondering if the drag washer thickness is critical - especially the under gear one? I replaced all the washers with carbontex on my ABU 7500C. I cut them myself from a 0.5 mm sheet. I have since found out that the under-gear washer is supposed to be 1 mm. Will it affect the meshing with the pinion gear? The reel seems to work alright.