Akron 1894L Manufacture Dates??

Started by jgp12000, September 15, 2021, 11:22:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

jgp12000

I picked up 6 combos today at Goodwill for $32 including an Akron 1894L/True Temper 4100 rod combo?, Zebco 33 ,888,404,a cheapo spinner (just for the rod), another Mitchell 300 missing lots of paint. My neighbor reloads and has a brass cleaner that uses SS media similar to small needle bearings. After disassembling I am thinking about running the 300 and the  Akron through the hopper, he says it mostly polishes. I may powder coat the 300 pink for my granddaughter or something different camo ? The 300 is being stripped  either way, I am concerned it might damage the Akron's finish?

foakes

Good bargains!

Should be able to play around with some of them, and maybe sell a couple to pay for the whole lot.

Good searching!

Best, Fred
The Official, Un-Authorized Service and Restoration Center for quality vintage spinning reels.

D-A-M Quick, Penn, Mitchell, and ABU/Zebco Cardinals

--


If your feeling down and don't know what to do
     Just hold on til tomorrow
Let go of the past
     Wrap your dreams around you
Live every day like it's your last

jgp12000

you think the SS media will damage the Akron?

oldmanjoe

 I would do it , just keep the glass end cap out .
Grandpa`s words of wisdom......Joey that thing between your shoulders is not a hat rack.....    use it.....
A mind is like a parachute, it only work`s  when it is open.......
Character is doing the right thing when nobody is looking .   There are too many people who think that the only thing that!s right is to get by,and the only thing that's wrong is to get caught .
The power of Observation   , It`s all about the Details ..
" Life " It`s a thinking man`s game
" I cannot teach anybody anything   I can only make them think "     - Socrates-
 Forget about all the reasons why something may not work. You only need to find one good reason why it will.   Alto Mare

jgp12000

#4
the reels are in the hopper now for 3 hours, I soaked the Akron 1894L handle in dawn/water and the plastic split in half on one end never seen that happen?