Brush recommendation's please

[huckgrey1]

Hello, hoping to get some brush recommendations for general grease application.

Tried a few from Amazon and the bristles end up falling out, quite annoying having to stop and pick up bristles.

If anyone's got a brush they like please let me know, thanks.

[Brewcrafter]

Used (or new for that matter) toothbrush works pretty well.  I have two - one for scrubbing small parts (think gear teeth) and one for grease application. - john

[Midway Tommy]

I use the Testor larger size model paint brush. I started with a small Cabela's epoxy brush for a couple of years & it worked OK but I ran across a bigger Testor's so I tried it. It worked great. I've used that same brush for at least 15 years now.

[day0ne]

A toothbrush for some things and a flux brush with the bristles cut back to make it stiffer.

https://www.amazon.com/s?k=flux+brushes&crid=2HUSP8LT234L6&sprefix=flux+brushes%2Caps%2C106&ref=nb_sb_ss_ts-doa-p_1_12

[alantani]

old toothbrushes. 

[huckgrey1]

Thanks all !!! Will try the suggestions.

[Keta]

I use tooth brushes and cheep Harbor Freight acid brushes.

[foakes]

I use tooth brushes and cheep Harbor Freight acid brushes.

Same here.  I do cut the bristles down about halfway on the Acid Brushes.

Best, Fred

[Keta]

That stiffens them up well, I do it to about 1/2 of mine.

[Steve V.]

I use cheap artist brushes from Hobby Lobby.

[Reeltyme]

For gears, I use my finger. Everything else I use a cotton swab.

[Dominick]

Acid brushes for me.  Dominick

[tincanary]

I use Harbor Freight acid brushes and fine artist brushes when I need more precise application.